• Journal of Korean Society for Geospatial Information Science
• /
• v.24 no.4
• /
• pp.13-19
• /
• 2016

This study presented the build-up of three-dimensional soil pollution map for precise analysis. To do this, survey on the existing pollutant region on Dongnae-gu, Busan that is the study subject, showed that it tended to produce 0.72 clusters. So, this study suggested to investigate center of $1km{\times}1km $ grid and, as the results of comparing the pollution map that input pollution figure values based on the actually investigation point showed precise results. And, it divided the standard of pollution into 5 levels in surface and underground space and the map was built up using IDW interpolation against the amount of polluted substance. The pollution of ground surface, flow of polluted substance, coefficient of permeability and ground water level that are 504 geotechnical informations were selected as the influential parameters in pollution analysis of underground space, and it calculated that to 0~20 points by dividing the characteristics. It enables the build-up of pollution map of ground surface-underground with depth that considers the characteristics of soil layers and it is considered that it is possible to analyze the general infiltration. And, it was considered that it enables more accurate forecast about influential analysis per depth and pollution of underground water.

• Journal of Korea Water Resources Association
• /
• v.54 no.7
• /
• pp.453-462
• /
• 2021

As the frequency of localized heavy rainfall has increased during recent years, the importance of high-resolution radar data has also increased. This study aims to correct the bias of Dual Polarization radar that still has a spatial and temporal bias. In many studies, various statistical techniques have been attempted to correct the bias of radar rainfall. In this study, the bias correction of the S-band Dual Polarization radar used in flood forecasting of ME was implemented by a Convolutional Autoencoder (CAE) algorithm, which is a type of Convolutional Neural Network (CNN). The CAE model was trained based on radar data sets that have a 10-min temporal resolution for the July 2017 flood event in Cheongju. The results showed that the newly developed CAE model provided improved simulation results in time and space by reducing the bias of raw radar rainfall. Therefore, the CAE model, which learns the spatial relationship between each adjacent grid, can be used for real-time updates of grid-based climate data generated by radar and satellites.

• Journal of the Korean Geographical Society
• /
• v.47 no.3
• /
• pp.390-406
• /
• 2012

Recently, stone walls in Jeju Island have gained more attention as their importance in cultural value and tourism source got recognized. In addition, there are several projects to restore the walls underway at local governments' level. This study was conducted with the idea that it is also necessary to find out the background to build stone walls and its implication. The study mainly investigated the height of 'Uldam' or a stone wall surrounding the property including the house by using wind maps, geological maps and interview with local residents. The study found out that stone walls are more likely to be higher than others when they were built to protect the property against wind and stood against maximum wind and easily catched stone surround house.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1537-1538
• /
• 2015

전력사용량이 산업발전과 더불어 기하급수적으로 증가하고 있으며, 한정된 공간내에서 대용량의 전력설비를 설치하기 위해 폐쇄형 배전반이 운영되고 있다. 한국전기안전공사에서 발표한 통계자료에 의하면, 고압이상 전기설비 검사결과 절연내력이 불합격인 경우가 다수 발생하고 있으며, 이는 아크 플래시 사고의 원인이다. 특히 수배전반의 경우 부하설비 또는 외부의 영향을 확인할 수 있는 장치 및 보호설비가 설치되어 있으나 자체 안전장치가 마련되어 있지 않아 자체사고를 신속히 검출하고 판단할 수 있는 기술이 필요하다. 본 논문에서는 해상도가 낮은 저가의 열화상 센서에 고속 DSP를 사용하여 영상처리 기법인 이차원 보간 법으로 해상도를 올려서 사용하는 기술을 이용하여 아크에 의해 발생되는 열특성을 검출하고 검출된 데이터를 전송하여 전기화재사고를 미연에 방지할 수 있는 장치 개발을 위한 기초 특성조사를 실시하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.9
• /
• pp.1547-1553
• /
• 2008

This paper presents a method that generates various facial expressions of vector graphic character by using the simplified principle component vector. First, we analyze principle components to the nine facial expression(astonished, delighted, etc.) redefined based on Russell's internal emotion state. From this, we find principle component vector having the biggest effect on the character's facial feature and expression and generate the facial expression by using that. Also we create natural intermediate characters and expressions by interpolating weighting values to character's feature and expression. We can save memory space considerably, and create intermediate expressions with a small computation. Hence the performance of character generation system can be considerably improved in web, mobile service and game that real time control is required.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.19 no.4
• /
• pp.130-145
• /
• 2016

Soil erosion processes are affected by weather factors, such as rainfall, temperature, wind, and humidity. Among these factors, rainfall directly influences soil erosion by breaking away soil particles. The kinetic energy of rainfall and water flow caused by rain entrains and transports soil particles downstream. Therefore, in order to estimate soil erosion, it is important to accurately determine the rainfall erosivity factor(R) in RUSLE(Revised Universal Soil Loss Equation). The objective of this study is to evaluate the average annual R using 14 years(2002~2015) of 1 minute rainfall data from 55 KMA(Korea Meteorological Administration) weather stations. The R results from 1 min rainfall were compared with previous R studies using 1 h rainfall data. The determination coefficients($R^2$) between R calculated using 1 min rainfall data and annual rainfall were 0.70-0.98. The estimation of 30 min rainfall intensity from 1 min rainfall data showed better $R^2$ results than results from 1 h rainfall data. For estimation of physical spatial rain erosivity(R), distribution of annual rainfall was estimated by IDW(Inverse Distance Weights) interpolation, taking elevation into consideration. Because of the computation burden, the R calculation process was programmed using the python GUI(Graphical User Interface) tool.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.9
• /
• pp.57-66
• /
• 2014

This paper presents a low-complexity barrel distortion correction processor for wide-angle cameras. The proposed processor performs the barrel distortion correction jointly with the color demosaicking, so that the hardware complexity can be reduced significantly. In addition, to reduce the required memory bandwidth, an efficient memory interface is proposed by utilizing the spatial locality of the memory access in the correction process. The proposed processor is implemented with 35K logic gates in a $0.11-{\mu}m$ CMOS process and its correction speed is 150 Mpixels/s at the operating frequency of 606MHz, where the supported frame size is $2048{\times}2048$ and the required memory bandwidth is 1 read/cycle.

• Spatial Information Research
• /
• v.13 no.4 s.35
• /
• pp.345-354
• /
• 2005

Super resolution image reconstruction method refers to image processing algorithms that produce a high resolution(HR) image from observed several low resolution(LR) images of the same scene. This method has proven to be useful in many practical cases where multiple frames of the same scene can be obtained, such as satellite imaging, video surveillance, video enhancement and restoration, digital mosaicking, and medical imaging. In this paper, we applied the super resolution reconstruction method in spatial domain to video sequences. Test images are adjacently sampled images from continuous video sequences and are overlapped at high rate. We constructed the observation model between the HR images and LR images applied with the Maximum A Posteriori(MAP) reconstruction method which is one of the major methods in the super resolution grid construction. Based on the MAP method, we reconstructed high resolution images from low resolution images and compared the results with those from other known interpolation methods.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.6
• /
• pp.162-169
• /
• 2008

Film restoration is to detect the location and extent of defected regions from a given movie film, and if present, to reconstruct the lost information of each regions. It has gained increasing attention by many researchers, to support multimedia service of high quality. Among artifacts, scratch is the most frequent degradation. In this paper, an automatic film line scratch removal system is developed that can detect and restore all kind of scratches. For this we use the spatial information of scratches: The scratch in old films has lower or higher brightness than neighboring pixels in its vicinity and usually appears as a vertically long thin line. Our systems consists of scratch detection and scratch restoration. The scratches of various types are detected by neural network based texture classifier and morphology-based shape filter and then the degraded regions are restored using bilinear interpolation. To assess the validity of the Proposed method, it has been tested with all kinds of scratches, and then experimental results show that the proposed approach is robust to various scratches and efficient to apply a real film removal system.

• Journal of Korean Society for Geospatial Information Science
• /
• v.13 no.1 s.31
• /
• pp.19-25
• /
• 2005

Nowadays, it is possible to construct the DEMs of urban area effectively and economically by LiDAR system. But the data from LiDAR system has form of DSM which is included various objects as trees and buildings. So the preprocess is necessary to extract the DEMs from LiDAR DSMs for particular purpose as effects analysis of man-made objects for flood prediction. As this study is for extracting DEM from LiDAR DSM of urban area, we detected the edges of various objects using edge detecting algorithm of image process. And, we tried mean value filtering, median value filtering and minimum value filtering or detected edges instead of interpolation method which is used in the previous study and could be modified the source data. it could minimize the modification of source data, and the extracting process of DEMs from DSMs could be simplified and automated.