• The Transactions of the Korean Institute of Power Electronics
• /
• v.12 no.4
• /
• pp.332-338
• /
• 2007

In this paper, the three modified space vector modulation methods are suggested in order to control effectively the shoot-through time at Z-source inverter. Both the switching patterns of three modulation methods and the modulation signals with a variation of shoot-through time are analyzed. The optimum modified space vector modulation method is determined by both the control range of the shoot-through time and the symmetry of the switching pattern and modulation signal. The performances of modulation methods are verified with the simulation results with 32-bit DSP.

• Fire Science and Engineering
• /
• v.17 no.3
• /
• pp.7-12
• /
• 2003

A 50 kW polyurethane fire in a compartment of 4 m ${\times}$ 1 m ${\times}$ 1.5m with large openings similar to a subway station was simulated by a large eddy simulation to investigate the fire and smoke control. The NIST FDS, which employed a mixture fraction combustion model and a finite volume method for radiation, was utilized. Distribution of temperature and smoke particles was compared with in the lower and upper corridors for three different smoke control systems, ventilation, purge, and extraction, starting in 5 sec from the ignition of the fire. For the given geometries, the ventilation system showed the best smoke removal rate and lowest temperature distribution in the both corridors. It was confirmed that the purge system is not recommended for a subway station since the smoke removal rate of the purge system was worse than that without a smoke control system.

• The KIPS Transactions:PartD
• /
• v.10D no.2
• /
• pp.211-220
• /
• 2003

As Geographic Information Systems represent three dimensional topological information, The Systems provide accurate and delicate services for users. In order to execute three dimensional topological operations, a dimensional transformation and heterogeneous spatial models should be used. However, the existing systems that use the dimensional transformation and the heterogeneous models, is not only difficult to operate the spatial operators, but also happened to support non-interoperability. Therefore, in order to solve the problems, we proposed three dimensional spatial object models that supported two dimensional object models and implemented them to show validity of the proposed models. When designing the three dimensional topological operators, we used 3DE-9IM which extended DE-9IM to support three dimensional concepts, and implemented operators on the component environment with object oriented concepts. The proposed three dimensional spatial object models and topological operators can support interoperability between systems, and execute spatial queries efficiently on three dimensional spatial objects.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.9
• /
• pp.2378-2387
• /
• 1998

This thesis proposes a design algorithm of an efficient space response compactor for Built-In Self-Testing of VLSI circuits. The proposed design algorithm of space compactors can be applied independently from the structure of Circuit Cnder Test. There are high hardware overhead cost in conventional space response compactors and the fault coverage is reduced by aliasing which maps faulty circuit's response to fault-free one. However, the proposed method designs space response compactors with reduced hardware overheads and does not reduce the fault coverage comparing to conventional method. Also, the proposed method can be extended to general N -input logic gate and design the most efficient space response L'Ompactors according to the characteristies of output sequence from CUT. The prolxlsed design algorithm is implemented by C language on a SUN SPARC Workstation, and some experiment results of the simulation applied to ISCAS'85 benchmark circuits with pseudo random patterns generated bv LFSR( Linear Feedback Shift Register) show the efficiency and validity of the proposed design algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.6C
• /
• pp.429-437
• /
• 2008

Multiple-input multiple-output (MIMO) techniques can be used for the spectral efficiency enhancement of the cellular systems, which can be categorized into spatial multiplexing (SM) and spatial diversity schemes. MIMO systems suffer a severe performance degradation due to the intercell interference from the adjacent cells as the mobile terminal moves toward the cell boundary. Therefore for the spectral efficiency enhancement, an appropriate transmission scheme for the given channel environment and reception scheme which can mitigate the intercell interference are required. In this paper, we propose an adaptive signal transmission/reception scheme for the spectral efficiency improvement of $M_R{\times}M_T$ MIMO systems, present the decision criteria for the adaptive operation of the proposed scheme, and demonstrate the performance gain. The proposed scheme performs adaptive transmission using spatial multiplexing and spatial diversity, and adaptive reception using maximal ratio combining (MRC) and intercell spatial demultiplexing (ISD) when the spatial diversity transmission is used at the transmitter. Spatial multiplexing/demultiplexing is performed at the high signal-to-interference ratio (SIR) range, and the transmit diversity in conjunction with the adaptive reception uses either conventional MRC or ISD which can mitigate the $M_R-1$ interference signals, based on the mobile location. For the performance evaluation of the proposed adaptive scheme, the probability density function (pdf) of the effective SIR for the transmission/reception methods in consideration are derived for $M_R{\times}M_T$ MIMO systems. Using the results, the average effective SIR and spectral efficiency are presented and compared with simulation results.

• Journal of KIISE:Software and Applications
• /
• v.26 no.1
• /
• pp.25-39
• /
• 1999

지리 정보 시스템에서 공간 분석을 위해 사용되는 중요한 연산인 공간 조인은 대상이 되는 공간 객체의 수가 증가함에 따라서 연산 시간이 지수적으로 증가하는 특징을 가지고 있다. 그러므로 다량의 공간 데이터에 대해서 공간 연산시간을 줄이기 위한 병렬처리가 필요하다. 이 논문에서는 비겹침 정규분할 방식의 사분트리를 이용한 공간 조인 알고리즘을 제시하고 MIMD 구조 및 공유 디스크 방식의 병렬 처리시스템에 적용하여 성능을 평가한다. 사분트리를 이용한 공간조인 방법으로서 중복 표현된 공간객체를 줄이기 위한 사분면(quadrant)의 병합 방법,영역 제한을 통해 연산 대상 객체를 줄이기 위한 사분면의 분할 방법, 그리고 병합 및 분할 방법을 혼용하여 공간 조인 연산의 숫자를 최소화하는 혼합 방법을 제시한다. 실험 평가에서는 각 방법들을 병렬 처리 시스템에 적용하여 여과단계 및 정제단계에서의 연산량과 수행 시간을 통해 성능을 비교 평가한다. 실험결과, 여과 단계에서는 분할 방법이 가장 우수했지만, 정제 단계에서는 병합 방법이 가장 우수했다. 따라서 전체적인 고려할 때 두 방법의 장점을 수용한 혼합 방법이 가장 우수한 성능을 나타냈다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.10A
• /
• pp.906-911
• /
• 2005

In this paper, for spatial multiplexing with limited feedback, we propose subspace method based preceding in which the active bases are selected at the receiver from a finite number of basis sets Down at both receiving and transmitting ends, conveyed to the transmitter using limited feedback, and assembled into a preceding matrix at the transmitter. The selected bases are conveyed to the transmitter using feedback information on both the index of the selected basis set, which defines the most appropriate set of coordinates for describing a multiple-input multiple-output (MIMO) channel, and the principal bases maximizing the capacity in the selected basis set. We show that the proposed subspace method based preceding provides a capacity similar to that of the closed-loop MIMO even with limited feedback.

• Journal of Digital Convergence
• /
• v.12 no.1
• /
• pp.415-421
• /
• 2014

In this paper, we proposed problem and improvement of halftoning using random space filling curve. Random space filling curve is developed as a solution for shortcoming which space filling curve has self-similarity. It is used to reduce regular pattern can be occurred in constant brightness area in order that randomness apply to scanning path. But there is a problem that some area along scanning path can show too bright result in halftoning using random space filling curve. In this paper, we analyzed cause of problem and proposed single pixel error diffusion as a solution method. This method can avoid over-accumulated error and show better result in halftoning.

• The Magazine of the IEIE
• /
• v.31 no.6
• /
• pp.17-39
• /
• 2004

본 논문에서는 다채널 오디오 시스템에서 사용되어지는 음향신호처리에 대하여 저자들이 그간 제안하였던 방법들을 중심으로 다뤘다. 다룬 내용은 첫째로 각 스피커에서 청자의 위치까지의 공간응답의 영향을 배재할 수 있는 역 필터링이고, 둘째로 다채널 스피커의 위치를 파악하여 최적 위치와의 차이를 자동적으로 보상할 수 있는 방법이다. 셋째로 인간의 인지적인 측면을 고려하는 다채널 스피커로부터의 에너지 레벨 정렬 방식에 대하여 다뤘고, 마지막으로 특정공간의 반사음의 분포 패턴을 구하여 이를 일반적인 청취공간에서 재현해 내는 음장 재현 방식에 대하여 요약하였다.(중략)

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2008.06a
• /
• pp.434-436
• /
• 2008

1차부터 3차에 이르는 국가지리정보체계 사업을 추진해 오는 동안 가장 큰 결과물 중의 하나가 정부 부처들이 각기 구축한 산림, 지적, 토지이용 등과 같은 공간정보 데이터베이스들이다. 이들 데이터베이스의 공유를 통해 자원효율성을 높이기 위해서는 연계 통합 방안이 필요하다. 본 연구는 데이터베이스의 물리적 통합(강결합 방식)이 아니라, 약결합방식에 의한 데이터베이스 연계시스템을 통해 통합서비스를 제공하는 시스템을 소개한다. 이 시스템은 데이터베이스 연계 중요성이 증가하는 시점에서 다양한 요구에 대응하는 데이터를 생성 관리함으로서 정보의 재사용성을 증가시키고, 정보의 최신성을 유지시킨다는 점에서 의의가 있다.