• Journal of Biomedical Engineering Research
• /
• v.16 no.3
• /
• pp.331-336
• /
• 1995

A composite material was produced as an artificial bone substitute which is gradually degrAded and replaced by the regenerated natural bones after implantation. To detect the effect of the material on the cell's activity, the composite specimens were placed in MEMs and incubated at $37^{\circ}C$ for one week. Human uterus cervical cancer origin HeLa 3 cells and mouse subcutaneous origin L929 cells were cul- tured in the specimen dissolved MEMs for 5 days to investigate cytotoxicity via cell growth rates. ${Na_2}^{51}CrO_4$ solution was added to the media, to label the HeLa 53 cells, and the released amount of $^{51}Cr$ was measured by a $\gamma$-counter. On the cell growth investigation, no significant cytotoxic phenomena were revealed in both HeLa S3 and L929 cell cultures. On the released 51CR from the incubated HeLa 53 cells, no significant cell degeneration was observed from the composite embedded MEMs.

• The korean journal of orthodontics
• /
• v.36 no.5
• /
• pp.324-330
• /
• 2006

Objective: The purposes of this study were to evaluate the differences between sand blasted, large grit and acid-etched (SLA) treated mini-implants and smooth surface orthodontic mini-implants in relation to the removal torque as well as the histologic analysis. Methods: Custom-made, screw-shaped, titanium implants with a length of 9.5 mm and an outer diameter of 1.8 mm were divided into 2 groups; the SLA group (20 SLA treated orthodontic mini-implants) and the smooth surface group (20 smooth surface mini-implants), and placed In the tibia metaphysis of 10 rabbits. Each rabbit had 4 mini-implants placed, 2 in each tibia. The right tibia were implanted with the SLA group mini-implants and the left tibia had the smooth group mini-implants placed. Each mini-implant group were immediately applied with a continuous traction force of 150 g using a Ni-Ti coil spring. The rabbits were sacrificed 6 weeks post-surgically. Subsequently, the legs were stabilized, the Ni-Ti coil springs were removed and the mini-implants were removed under reverse torque rotation with a digital torque gauge. Results: 6 weeks after placement, the SIA group presented a higher mean removal torque value (8.29 Ncm) than the smooth group (3.34 Ncm) and histologic analysis revealed a higher new bone formation aspect along the screw in the SLA group. Conclusion: Results of this study indicates that SLA treated mini-implants may endure higher orthodontic forces without loosening.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.4
• /
• pp.397-404
• /
• 2019

Bone and soft tissue conditions are important for successful implant treatment. But, the placement itself is also very important. Implants which is installed in the wrong position result in the biological, esthetical and mechanical problems. In order to place an implant in the correct position, the final restoration and diagnostic wax-up should be considered prior to the surgery. If the artificial teeth for the interim denture are directly transferred from the diagnostic wax-up, the operator can try the form of diagnostic wax-up in the mouth. If the surgical template is produced by duplicating the interim denture, the implant can be placed in the planned position. In this case, the polymethyl methacrylate (PMMA) artificial tooth was precisely milled by the digital duplication of diagnostic wax-up. And interim denture was fabricated by using these milled teeth. After the patient adapted for a sufficient period, the implant was placed at the planned position with surgical template produced by duplicating the interim denture. After confirming sufficient osseointegration, the final prostheses were made to reflect the shape of diagnostic wax-up. Through this procedure, the satisfactory functional and esthetic outcome could be acquired.

• Journal of radiological science and technology
• /
• v.35 no.1
• /
• pp.9-15
• /
• 2012

The purpose of this study is to provide preliminary data for bone disease prevention by examining the correlation between bone mineral density, and lifestyle and nutritional status of female shift workers, at general hospitals with an irregular life cycle. The subjects for this study were 232 female shift workers, over 30 years old, who worked at a general hospital more than 5 years. From the subjects, who understood the purpose of this study and decided to be participated, we measured serum albumin, total brotein, total cholesterol, hematocrit, hemoglobin, calcium, phosphorus from blood test, and obtained bone mineral density. To analyze the effectiveness of the variables for explanation power, we established the studied values as independent variables, bone minral density as a dependent variable. Exercise, the number of drinking, calcium, and phosphorus were selected as significant variables and the explanation power was 10.2%. The bone mineral density were significantly higher at the subjects who had exercise, higher calcium and phosphorus possession, and drank alcohol than the opposite cases. Regular exercise, and 1:1 intake of calcium and phosphorous were important to prevent osteoporosis for the subjects who were working three shifts which cause irregular lifestyle.

• Journal of the Korean Arthroscopy Society
• /
• v.5 no.2
• /
• pp.99-103
• /
• 2001

Purpose : The purpose of this prospective study was to evaluate second look arthroscopic finding after osteochondral autograft transfer(OAT) for the treatment of the chondral defect of the knee. Materials & Methods : Fourteen out of forty cases underwent second look arthroscopy after the OAT for the treatment of the chondral defect of the knee. The average age of patients was 34 years. Preoperatively, magnetic resonance imaging was performed in eleven cases and chondral defect was confirmed in nine cases. The site of the chondral defect located at medial femoral condyle at seven, trochlea in four, and lateral fomoral condyle in three cases. The average size of the condral defect was $13\times10mm$, maximum $22\times20mm$. The number of graft was one in eight, two in three, three in two, and five in one case. The average follow-up period was twenty-one months. Second look arthroscopy was performed at six months in almost cases. Results : After the OAT, $86\%$ of cases showed that the consistency of grafted cartilage was firm and $93\%$ of cases showed that grafted cartilage was well incorporated with surrounding cartilage. Conclusion : The results of this study suggest that OAT can be one of treatment modality in the chondral defect of the knee.

• Journal of The Korean Society of Inherited Metabolic disease
• /
• v.17 no.1
• /
• pp.24-30
• /
• 2017

Gorham-Stout disease is a rare disorder characterized by lymphovascular proliferation and destruction of osseous matrix. The etiology of this condition remains poorly understood. Chylothorax as a consequence of lymphatic leakage in thoracic cage may cause a severe life-threatening complication, accompanying respiratory difficulty. Currently, there is no standard management for this extremely rare condition. Here we describe a patient affected by Gorham-Stout disease successfully managed by the combined treatment of mTOR inhibitor and beta-blocker. A previously healthy 11-year-old female developed dyspnea and chest pain with a massive pleural effusion. The ligation of right thoracic duct and bilateral pleurodesis temporarily decreased her pleural effusion, which was aggravated repetitively and required frequent admission and tube thoracotomies. Along with bilateral pleural adhesiolysis with thoracotomy, the combined treatment of oral beta-blocker and mTOR inhibitor was commenced. After 1 month of oral medication, her pleural effusion was not increased and she was free of respiratory difficulty on room air without chest tubes. Over eleven months of treatment, no serious adverse reaction was noted and her condition has been stable with no further admission required.

• Journal of Biomedical Engineering Research
• /
• v.30 no.1
• /
• pp.49-55
• /
• 2009

Purpose : The aim of this study is to evaluate a possibility of clinical application for the effects of low intensity ultrasound stimulation (LIUS) in morphological characteristics (i.e., structure, bone mineral density) of bone on osteoporotic fracturesprevention. Materials and Methods : Eight virgin 14-week-old ICR mice (approximate weight 25g) were used and ovariectomized (OVX) to induce osteoporosis. Right tibia (US) for each mouse served as the LIUS (1.5MHz frequency, 1.0 kHz pulse repetition on frequency, $30mW/cm^2$ intensity, $200{\mu}s$ pulse length, and stimulation for 20 minutes a day and 5 days a week over a 6-week period). Left tibia (CON) for each mouse served as the non-stimulated controls. Structural parameters and bone mineral density ($g/cm^3$) on trabecular bone of tibiae were calculated and measured from images derived in-vivo micro computed tomography (micro-CT) at 0 week and after 6weeks. Results : The BV/TV and Tb.N in US group were significantly bigger than those in CON group. The Tb.Pf in US group, moreover, was significantly smaller than that in CON group (p<0.05).For the others structural parameters and BMD, however, there were no significant difference between US group and CON group (p>0.05). Conclusion : The LIUS might prevent bone loss and keep bone connectivity in osteoporotic bones. Therefore, the LIUS might prevent effectively the osteoporotic fractures in clinics.

• The Journal of Korean Academy of Prosthodontics
• /
• v.56 no.1
• /
• pp.40-49
• /
• 2018

It is reported that the causes of unaesthetic proportion of anterior teeth vary widely. Especially, when the unaesthetic tooth proportion of the mandibular incisors arises due to the wear of the anterior teeth accompanied by the compensation of the alveolar bone, it may cause serious functional and aesthetic problems. In such case, it should be considered that the evaluation of vertical dimension and tooth proportion as well as smile line, soft tissue and hard tissue morphology. And, increase of vertical dimension or clinical crown lengthening followed by prosthodontic restorations is needed to improve the interdental mesial/distal, width/length ratio considering the anterior guidance. This case report demonstrates functional and aesthetic improvements through systematic diagnosis and treatment procedures in a 48-year-old male patient with unaesthetic anterior teeth proportion because of tooth wear accompanied by the compensation of alveolar bone and defect of several central incisors due to chronic periodontitis.

• The Journal of the Korean bone and joint tumor society
• /
• v.2 no.1
• /
• pp.33-37
• /
• 1996

From January 1994 to August 1995 we performed 270 cases of fine needle aspiration cytology for bone and soft tissue lesions. Among them 137 cases were diagnosed histologically. Sixty-seven cases were benign and 70 cases were malignant. We analysed these on the aspect of sensitivity, specifity, positive predictive value, negative predictive value of the cytologic examination. Malignant cases consisted of bone tumor 29 cases; soft tissue tumor 25 cases; and metastatic tumor 16 cases. The sensitivity and specifity of the aspiration cytology for malignant tumor were 67.8% and 97%, respectively. The positive and negative predictive value of aspiration cytology were 97.4% and 72.7%, respectively. Among them 40 cases were primary bony lesions; 14 benign lesions, 26 malignamt bone tumors. Sensitivity of aspiration cytology for these primary bony lesion was 90%(18/20) and its specifity was 100%(13/13). Three cases showed atypical cells in cytology but with biopsy we could find them as one benign and two malignancies. Two cases of manignancy showed negative result in cytology; one was parosteal sarcoma of proximal femur and the other was osteosarcoma of proximal tibia which was biopsied already at other hospital. Although the overall sensitivity and specifity for malignant bone and soft tissue tumors were relatively low and not so predictable, the fine needle aspiration cytology for primary bony lesion was useful in the differential diagnosis of benign or malignancy.

• Journal of the Korean Society of Radiology
• /
• v.7 no.5
• /
• pp.313-320
• /
• 2013

For some patients with joint illnesses such as rheumarthritis or varus deformity, the total knee arthroplasty (TKA) procedures are performed. However, when inserting metal cutting guide for the procedures, due to the femoral shaft bowing, complications such as the cortex of the femoral shaft damages or secondary fractures can be caused. If the central coordinate value of the femoral shaft is known, the metal cutting guide could be inserted into the anatomical center, so such complications can be prevented. In this study, CT images of femoral shafts of 10 individuals in the experiment group who are in need of receiving the total knee arthroplasty procedures and those of 10 individuals in the control group without illness in the femoral shaft have been utilized to locate the 3-dimensional coordinate values. Then, Matlab was utilized to identify the central coordinate value in order to obtain a graph reflecting the anatomical shapes as well as to acquire the 3-dimensional radial curvature values by section. As a result, the average curvature range and standard deviation of femoral shafts of the experiment group was determined to be $758.15{\pm}206.3mm$ whereas the that of the control group was determined to be $1672.97{\pm}395.6mm$. The statistical significance of the measured results was verified through f-distribution analysis. Based on these results, it was verified that the level of curvature of the femoral shaft of the experiment group was higher. If the anatomical central points are located and analyzed using this methodology, it would be helpful in performing orthopedic operations such as the total knee arthroplasty.