• Journal of Korean Society of Steel Construction
• /
• v.12 no.4 s.47
• /
• pp.351-362
• /
• 2000

This paper is to study on the behavior of CFT column to H-beam end plate connections with penetrated high-strength bolts under cyclic load. The main parameters are as follows: 1) the thickness of end plate: 16mm, 22mm and 25mm, 2) the thickness of column : 9mm and 12mm. Comparison and analysis on the test results are performed in accordance with parameters. This study investigates energy absorption capacity of beam-column connections and analyzes the shear strength of joint panel. The shear strength of joint panel is estimated by superimposing the strength of the steel which is based on the von Mises yield criterion and that of the concrete which is used the Strut model to consider the effect of filled concrete.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.96-97
• /
• 2019

최근 홍수파 또는 댐 및 보 등의 하천구조물과, 본류와 지류의 합류로 인해 발생하는 배수영향 등으로 하천에 고리형 수위-유량관계가 나타나 수위-유량관계식의 신뢰도가 저하된다고 판단되는 대하천 본류와 합류부 인근 지류에서 초음파유속계 측정결과를 지표로 활용하는 자동유량장치가 현재 58개소에 도입되어 운용되고 있다. 그러나, 최근 4대강 사업으로 다기능보 설치 등 하천의 수리적 특성이 변동하였고, 지류에서 주로 운용되는 수위-유량관계 기반 유량관측소에 본류-지류합류로 인한 배수영향으로 고리형 수위-유량관계가 형성될 경우, 지류 수위관측소를 자동유량관측소로 대체할 필요성이 제기되고 있다. 또한, 기존 자동유량관측소의 경우 홍수량이 기준이하로 나타날 경우 수위-유량 관계식으로 대체하는 경우도 있는데 적용기준이 명확하지 않다. 본 연구에서는 신규 자동유량장치 설치, 기존 수위관측소의 자동유량관측소대체, 자동유량관측소에서 수위-유량관계곡선의 활용 기준 마련 등을 명확하게 판단하기 위해 고리형 수위-유량관계 패턴을 분석하고 배수영향구간을 산정하여 제시하고 지류 수위관측소의 존속여부, 유량자료의 적절성을 판단할 수 있는 방법론을 제시 하고자한다. 이를 위해, 다기능보 설치 및 지류-본류로 인한 지류하천의 배수영향과 홍수파에 의한 고리형 수위-유량관계의 양상을 다양한 수문사상에 대해 분석하였다. 분석방법으로는 대상유역을 선정하고, 대상유역에 대한 부정류 모형을 구축하기 위해 HEC-RAS 모형을 사용하고, 대상유역에 대한 HEC-RAS 지형자료와 유량입력자료를 구축한다. HEC-RAS 부정류 모형 구축 후 다양한 본류와 지류의 유량을 가정하여 고리형 수위-유량 발생 패턴을 분석한다. 지류-본류 합류 영향의 경우, 본류영향의 유무를 고려하여 상승된 수위의 비율로부터 일정 유의수준을 두어 배수영향구간을 산정한다. 다기능보의 영향은 다기능보 설치 전후를 가정하여 영향을 분석한다. 본 연구에서는 시범구역으로 하류에 창녕함안보가 위치한 낙동강과 합류하는 남강과 하류에 달성보가 위치한 낙동강과 합류하는 금호강을 대상하천으로 하여 위 분석방법을 적용하였다. 분석결과 남강의 경우 지류 유량이 작은 경우에도 본류 유량이 상대적으로 큰 경우 배수영향에 의한 고리형이 나타났고, 다기능보에 의한 배수영향은 매우 적은 것으로 나타났다. 또한, 지류의 유량이 큰 경우 홍수파에 의한 고리형 관계도 발생함을 알 수 있었다. 금호강의 경우 또한 마찬가지로 본류의 유량에 의해 발생하는 고려형 관계가 지배적임을 알 수 있었다. 따라서 이러한 결과를 바탕으로 95%의 유의 수준을 기반으로 고리형 발생 여부를 확일할 수 있는 모노그래프를 남강, 금호강에 대해 작성하여 수위-유량관계 기반 유량 산정의 적절성을 판단하는 기준으로 제안하였다.

• The korean journal of orthodontics
• /
• v.36 no.4
• /
• pp.284-294
• /
• 2006

Objective: Activating mutations in the fibroblast growth factor receptor-2 (FGFR2) have been shown to cause syndromic craniosynostosis such as Apert and Crouzon syndromes. The purpose of this pilot study was to investigate the resultant phenotypes induced by the two distinctive bone-targeted gene constructs of FGFR2, Pro253Arg and Cys278Phe, corresponding to human Apert and Crouzon syndromes respectively. Methods: Wild type and a transgenic mouse model with normal FGFR2 were used as controls to examine the validity of the microinjection. Micro-CT and morphometric analysis on the skull revealed the following results. Results: Both Apert and Crouzon mutants of FGFR2 induced fusion of calvarial sutures and anteroposteriorly constricted facial dimension, with anterior crossbite present only in Apert mice. Apert mice differed from Crouzon mice and transgenic mice with normal FGFR2 in the anterior cranial base flexure and calvarial flexure angle which implies a possible difference in the pathogenesis of the two mutations. In contrast, the transgenic mice with normal FGFR2 displayed normal craniofacial phenotype. Conclusion: Apert and Crouzon mutations appear to lead to genotype-specific phenotypes, possibly causing the distinctive sites and sequence of synostosis in the calvaria and cranial base. The exact function of the altered FGFR2 at each suture needs further investigation.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2000.04b
• /
• pp.308-314
• /
• 2000

This study explores the free, out-of-plane vibrations of horizontally circular curved beams. The differential equations governing the free vibration of such beams, including the effects of warping and rotatory inertia, are derived and solved numerically. The Runge-Kutta method and the Determinant Search method combined with Regula-Falsi method are used to integrate the differential equations and to obtain the natural frequencies, respectively. The lowest three natural frequencies are calculated over a wide range of non-dimensional system parameters: the horizontal rise to span length ratio, the slenderness ratio, the stiffness parameter, and the warping parameter. It is expected that the results obtained herein can be used practically for the design of curved member systems.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 1998.11a
• /
• pp.64-68
• /
• 1998

본 연구는 오염토양/지하수의 정화를 위하여 사용되는 계면활성제 교정기술의 보다 현실적인 평가를 위하여 토양에 흡착된 계면활성제에 대한 소수성 유기오염물인 Naphthalene과 Phenanthrene의 흡수현상에 대한 연구결과를 나타내었다. 음이온 계면활성제인 Sodium Dodecyl Sulfate (SDS)와 중성 계면활성제인 Tween 80의 흡착곡선은 소수성 꼬리 (hydrophobic tails)간의 상호작용에 의하여 S-형 모양을 보이며 이들 흡착된 계면활성제는 Micelle로 존재하는 계면활성제에 비하여 유기오염물에 대한 보다 강한 흡수능력을 나타내었다. 결과에 나타난 흡수능력의 차이는 계면활성제가 흡착되어있거나 Micelle상태로 존재할 경우 다른 구조를 형성하기 때문이라 사료된다. 흡수된 계면활성제와 Micelle의 상호경쟁에 의하여 유기오염물의 부동성(immobility)을 나타내는 분배계수(distribution coefficient)는 계면활성제의 농도에 반비례하였다. 결론적으로 토양/지하수의 오염물 정화를 위하여 계면활성제 교정기술의 적용 시 고정상 (solid phase)에 있는 흡착 계면활성제에 의한 유기오염물의 지체현상 (retardation)을 고려하여야 한다.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.10
• /
• pp.1763-1769
• /
• 2001

본 논문에서는 쪽의 발효염색이 잿물과 같이 강 알칼리 매체 하에서 사용해야 하고 또한 자연 발효의 경우 온도조절이 제한되어 있어 단백질 섬유 특히 양모에는 적합하지가 않은 점 등을 해결하기 위해 우리나라에서 주로 현재 재배되고 있는 polygonum tinctorium을 사용하여 Saxon blue 법으로 단백질 섬유를 염색하여 염색성을 살펴보았다. 그 결과 Saxon blue로 염색할 때의 등온흡착곡선은 Langmiur형임을 보였으며 색상은 주로 B 영역에서 나타났다. Saxon Blue로 염색한 견 직물과 양모 직물 모두 우수한 항균성을 나타내었으며 드라이 크리닝과 마찰에 대해서는 좋은 견뢰도를 보여 주었다.

• Journal of Animal Science and Technology
• /
• v.46 no.4
• /
• pp.503-508
• /
• 2004

This study was conducted to estimate the growth curve parameters of crossbreds between Korean native boars and Landrace sows and their relationships with meat qualities. The data used were weight-age data and carcass data from 131 males and 122 females raised at N.L.R.I in Korea. Growth curve parameters were estimated from nonlinear regression using Gompertz model individually. Average mature weight(A), average maturing rate(k), and average inflection point(u) showing maximum growth rate estimated were 179.54${\pm}$6.06kg, 0.3154${\pm}$0.0059, and 5.50${\pm}$0.11 months in females, and 179.84${\pm}$6.33kg, 0.3049${\pm}$0.0061, and 5.24${\pm}$0.13 months in males, respectively. For the growth curve parameters and derived statistics, the phenotypic correlations of maturing rate with gain rate at inflection, mature weight, and inflection point were - .30, - .77, and - .93 in male, and - .31, - .78 and - .94 in female, respectively. Matrure weight was positively correlated to the inflection point as + .89 in both male and female, indicating that late maturing pigs with lower k had longer maturing period with increasing gain rate and reached point of inflection later than early maturing pigs with higher k, and grew to larger mature weight. Backfat thickness and erode fat contents were correlated with mature weight positively in male and negatively in female, and correlated with gain rate at inflection point positively in both male and female, of which coefficients were as high as .42 and .50 in male, respectively.

• Geophysics and Geophysical Exploration
• /
• v.12 no.1
• /
• pp.154-162
• /
• 2009

Sonic wave dispersion characteristics are one of the most important targets of study, particularly in estimating shear wave velocity from borehole sonic logging. We have tested dispersion characteristics using monopole and dipole sources. Theoretical dispersion curves were computed for tool-absent and tool-included models having the same physical properties but different diameters (including ${\Phi}520mm$, ${\Phi}150mm$, and ${\Phi}76mm$). Comparisons were made between boreholes of different sizes and between tool-absent and tool-included models. Between the tool-included and the tool-absent boreholes, a close similarity in dispersion curve shape was revealed for the monopole source, and a significant difference was shown for the dipole source. However, for the cut-off frequency, particularly in the engineering boreholes (${\Phi}76mm$ and ${\Phi}50mm$), a significant difference was observed for signals from the monopole source, but approximately the same cut-off frequencies were found with the dipole source. This indicates the need of careful choice of source frequency in monopole-source sonic logging, particularly in an engineering borehole. The results of numerical experiments show that cut-off frequency is exponentially proportional to the inverse of borehole radius, irrespective of the mode type and the presence of a tool, and that the cut-off frequencies for each borehole environment could be expressed as an exponential function, rather than the inversely proportional relationship between the cut-off frequency and the borehole radius that was previously generally recognised. From the direct comparison of dispersion curves, the effects on the dispersion characteristics of borehole size and the presence of the tool can be revealed more clearly than in previous studies, which presented the dispersion curve and/or characteristics for each borehole environment separately.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.1
• /
• pp.97-107
• /
• 2020

In this study, finite element analysis was carried out through the finite element analysis program (ANSYS) to investigate the fire resistance of composite columns in fire. Transient heat transfer analysis and static structural analysis were performed according to ASTM E 119 heating curve and axial force ratio 0.7, 0.6, 0.5 by applying stress-strain curves according to temperature, and loading heating experiments were carried out under the same conditions. In addition, the nominal compressive strength of the composite column according to the heating time according to the standard(Eurocode 4) was calculated and expressed as the axial force ratio and compared with the analytical and experimental values. Through the analysis, As a result of finite element analysis, the fire resistance time was 180 minutes and similar value to the experimental value was obtained, whereas the fire resistance time 150 minutes and 60 minutes were derived from the axial force ratios 0.6 and 0.7. In addition, it was confirmed that the fire resistance time according to the axial force ratio calculated according to the reference equation (Eurocode 4) was lower than the actual experimental value. However, it was confirmed that the standard(Eurocode 4) was higher than the experimental value at the axial force ratio of 0.7. Accordingly, it is possible to confirm the fire resistance characteristics(time-axial force ratio relationship) of the SRC column at high axial force, and to use the experimental and anaylsis data of the SRC column as the data for verification based on Eurocode.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.8
• /
• pp.42-49
• /
• 2005

A new blockage correction method has been developed for the wall interference correction of closed test-section subsonic wind tunnels based on the nonlinear relationship between separation blockage and separation drag. This method can be applied continuously from the linear lift-slope region to the highly nonlinear post-stall region by on-line processing. The present method was validated by comparing the results with a classical method based on the test results of a bluff body and a measured-boundary-condition method. It was shown that the present method is in good agreement with the measured-boundary-condition method, enabling better wall corrections than the bluff body method in both near-stall and post-stall regions.