• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2017.11a
• /
• pp.141-142
• /
• 2017

우리나라와 같이 산악지형이 많은 곳에서는 불가피하게 곡선형태의 교량을 적용해야하는 경우가 빈번하게 발생한다. 또한 곡선교량은 지형적 제약 조건으로 인한 적용 이외 에도 경관적 아름다움으로 인해 많이 건설되고 있는 추세이다. 이러한 곡선 교량의 경우 직선 교량보다 형상적인 문제로 비틀림과 뒤틀림으로 인해 다른 거동 양상을 보이며 특히 동적인 거동에서는 매우 다른 거동 형태를 보인다고 할 수 있다. 따라서 본 연구에서는 곡선 보의 유한요소 모델을 구축하여 정적해석을 수행하고 이를 이론해와 비교하여 검증하고자 하며 결과적으로 구축된 유한요소 모델의 결과와 이론해의 결과와 잘 부합한다고 판단된다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.4
• /
• pp.327-332
• /
• 2008

The effectiveness of vehicle parts made through extrusion is in the limelight because of the advantages of high strength stiffness materials can be produced and the number of processes can be drastically reduced. Therefore, the parts should have sufficient stiffness and be lightweight enough to improve fuel efficiency. However, the application of extruded aluminum requires pre-bending technologies that can manufacture the complex designs profiles demanded by vehicle parts. The aim of this research is that the development of the variable curvature extrusion technology that can produce a variety of curvature. In order to produce a variable curvature, the guide transfer speed and transfer time should be controlled properly. The guide transfer speed and transfer time were examined by the theoretical analysis. A model was developed to simulate the deformation behaviors of extrusion and bending process from the symmetric bumper with range of radii from 1863mm to 2163mm. The theoretical analysis and FE analysis were verified through experimental method.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.10
• /
• pp.924-931
• /
• 2015

When a target locates at low altitude over a curved earth surface and far away from a radar, we examine the accuracy of the conventional formulations to compute the radar echo signal. The 4-ray model is used to calculate the scattering by the target to consider the ground plane effect. In this paper, the diffracted wave is not included. Based on the required parameters able to be calculated by known equations for the estimation of the wave propagation phenomena, the radar echo signal is computed and verified by comparing with measured data sets.

• Journal of KIISE:Computer Systems and Theory
• /
• v.31 no.3_4
• /
• pp.239-246
• /
• 2004

Image snapping for an image moves the cursor location to nearby features in the image, such as edges. In this paper, we propose geometric snapping for 3D triangular meshes, which is extended from image snapping. Similar to image snapping, geometric snapping also moves the cursor location naturally to a location which represents main geometric features in the 3D triangular meshes. Movement of cursor is based on the approximate curvatures which appear geometric features on the 3D triangular meshes. The proposed geometric snapping can be applied to extract main geometric features on 3D triangular meshes. Moreover, it can be applied to extract the geometric features of a tooth which are necessary for generating the occlusal surfaces in dental prostheses.

• Journal of KIISE:Computer Systems and Theory
• /
• v.32 no.11_12
• /
• pp.705-716
• /
• 2005

There exist many feature point detection algorithms that developed in pattern recognition research . However, interactive applications for the pen-input displays such as Tablet PCs and LCD tablets have set different goals; reliable segmentation for different drawing styles and real-time on-the-fly fieature point defection. This paper presents a curvature estimation method crucial for segmenting freeHand pen input. It considers only local shape descriptors, thus, peforming a novel curvature estimation on-the-fly while drawing on a pen-input display This has been used for pen marking recognition to build a 3D sketch-based modeling application.

• Journal of Digital Contents Society
• /
• v.5 no.4
• /
• pp.289-294
• /
• 2004

For the purpose of image analysis, we usually take the application method relying on the various mathematical theories. On the respect of image as two variable function one may uses the gradient vector or several type of energy functions induced by the conventional (partial) derivative. We also have used the tangent plane or curvature vector from the concept of differential geometry {**]. However, these mathematical tools my assume that the given function should be sufficiently smoothing enough to depict every local variation continuously. But the real application of these mathematical methods to the natural images or phenomena may occur the ill-posed problem. In this paper, we have defined the weak derivative as a loose form of the derivative so that it my applied to the irregular case with less ill-posed problem.

• Journal of Korean Association for Spatial Structures
• /
• v.10 no.4
• /
• pp.123-132
• /
• 2010

To overcome the drawback of currently available curved beam theories having non-symmetric thin-walled cross sections, a curved beam theory based on centroid-shear center formulation is presented for the spatially coupled free vibration and elastic analyses. For this, the displacement field is expressed by introducing displacement parameters defined at the centroid and shear center axes, respectively. Next the elastic strain and kinetic energies considering the thickness-curvature effect and the rotary inertia of curved beam are rigorously derived by degenerating the energies of the elastic continuum to those of curved beam. In order to illustrate the validity and the accuracy of this study, FE solutions using the Hermitian curved beam elements are presented and compared with the results by centroid formulation, previous research and ABAQUS's shell elements.

• Journal of the Society of Disaster Information
• /
• v.14 no.1
• /
• pp.43-50
• /
• 2018

This study presented 3D Finite Element (FE) analysis of curved beam structures subjected to static and dynamic loading conditions, which is particularly strong ground motions. It was shown that the results obtained from 3D FE analyses was similar to the theoretical solution within 1% convergency error, in order to validate the 3D solid FE models in this study. In particular, it was focusing on development of dynamic characteristics of curved beam structures subjected to three-different seismic ground motions: GyeongJu, Lomaprieta and Northridge earthquakes. Consequently, It was interesting to find that the results obtained from GyeongJu earthquake was detuned due to high frequency effect, but the Von-Mises of the curved beam structure under Lomaprieta earthquake was 647.824 MPa at 45 curvature degree.

• Korean Journal of Optics and Photonics
• /
• v.15 no.3
• /
• pp.268-273
• /
• 2004

A finite model eye based on longitudinal spherical aberration is designed by an optimization method. Longitudinal spherical aberration for pupil diameter between 1 mm and 8 mm is graphed theoretically and compared with other model eyes. The chromatic dispersions are adjusted to fit experimentally observed chromatic aberration of the eye. This is a finite model eye with four a spheric refracting surfaces. It has an effective focal length of 15.842 mm. A designed reduced eye has an equivalent power of 63.12 Diopter, curvature radius of 5.281 mm, index of 1.33333, and axial length of 21.123 mm.

• Composites Research
• /
• v.34 no.2
• /
• pp.123-128
• /
• 2021

This paper dealt with multi-scale natural frequency characteristics of wavy CNT (carbon nanotube) reinforced composites by applying the Mori-Tanaka method, rule of mixture, and Halpin-Tsai equation. By compelling benefit of an ad-hoc Eshelby tensor, the load-transfer characteristics of CNT with a waviness implanted in the polymer matrix was determined. The numerical results obtained are in good agreement with those reported by other investigators. Furthermore, the new results reported in this paper show the interactions between CNT weight, waviness ratios and layup sequences of laminated composites. Key observation points are discussed and significant considerations are given in practical designing of CNT reinforced composites.