• Journal of the Korean Applied Science and Technology
• /
• v.31 no.2
• /
• pp.305-312
• /
• 2014

The following study is the result of herbal teas puffed at different temperatures between $140{\sim}220^{\circ}C$. There was change of single breadth that some carbonization occurs according to rise of processing temperature and crude ash content rises relatively, and crude protein and crude fat content had hardly changed and moisture content decreased. The solid elution rate of the herbal teas appeared by 0.18~0.27% (w/w), it increased as puffing temperature rises. The reason for the increase in solid elution rates is due to the breakage of cross bridges between the raw materials in the herbal tea which are carbohydrates, proteins, lipids and etc. after treatments of physical changes rather than chemical ones. Benzopyrene content happened difference in B(${\alpha}$)P content according to processing temperature, raw material by 0.18~0.24 ppbs.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.4
• /
• pp.790-796
• /
• 2013

The following is the study result of herbal tea roasted at different temperatures between $80{\sim}140^{\circ}C$. Depending on treatment temperature the water content decreased, some carbonization occurred and crude ash content relatively increased. Also crude protein and crude fat changed little. Benzopyrene content (0.17~0.35ppb) showed a tendency to increase with higher treating temperature. From this result, the $B({\alpha})P$ content differed depending on the treatment temperature and raw materials. In case of roasting, the actual inside temperature is around $200^{\circ}C$ but since the surface temperature of the roaster reaches around $2,000^{\circ}C$ some portion of $B({\alpha})P$ content was presumed to be produced from the area that came in contact with this surface. Solid elution rate of herbal tea showed 0.18~0.35%(w/w) and the rate of solid elution decreased with higher roasting temperature. There was no big change in $80{\sim}110^{\circ}C$ treatment section but the solid elution decreased rapidly in $110{\sim}140^{\circ}C$ section. The reason for decreasing solid elution rate at higher treatment temperature is because the compact inner tissue makes elution difficult.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.4
• /
• pp.703-710
• /
• 2014

The following is the study result of herbal tea roasted at different temperatures between $80{\sim}140^{\circ}C$. Depending on treatment temperature the water content decreased, some carbonization occurred and crude ash content relatively increased. Also crude protein and crude fat decreased little. Solid elution rate of herbal tea showed 0.15~0.32%(w/w) and the rate of solid elution decreased with higher roasting temperature. There was no big change in $80{\sim}110^{\circ}C$ treatment section but the solid elution decreased rapidly in $110{\sim}140^{\circ}C$ section. The reason for decreasing solid elution rate at higher treatment temperature is because the compact inner tissue makes elution difficult. Benzopyrene content (0.29~0.51ppb) showed a tendency to increase with higher treating temperature. From this result, the $B({\alpha})P$ content differed depending on the treatment temperature and raw materials. In case of roasting, the actual inside temperature is around $200^{\circ}C$ but since the surface temperature of the roaster reaches around $2000^{\circ}C$ some portion of $B({\alpha})P$ content was presumed to be produced from the area that came in contact with this surface. When the processing which is a main component of food carbohydrate, protein, fat reason despite serve heat treatment as a whole is to be detected even though the $B({\alpha})P$ in this way is considered to be.

• Korean Journal of Food Science and Technology
• /
• v.18 no.2
• /
• pp.168-172
• /
• 1986

The swelling and hydration properties of Korean red ginseng tails and yield of total solids in extract were studied during extraction with ethanol solution having a concentration of 0-90% at $60-100^{\circ}C$. Extraction was carried out 5 times which was taken 8 hours per each time of extraction. The swelling, hydration and total solids yield were increased as the ethanol concentration decreased and as the extraction temperature raised. The cumulative value of solids yield suggested that three times of extractions with water or 70% ethanol were effective to recover more than 84%. Linear regression analysis on the properties investigated and extraction conditions showed a linear logarithmic relationship .

• Food Science and Preservation
• /
• v.19 no.1
• /
• pp.81-86
• /
• 2012

The objective of this study was to investigate the cooking properties of seven different rice cultivars (Dasan, Keunseom, Goami, Baekjinju, Seolgaeng, Hangangchal, and Heukseol). For the Hunter's color values, the L value was highest in the Seolgaeng cultivar, the a value was highest in the Heukseol cultivar, and the b value was highest in the Hangangchal cultivar. For the water absorption rate, that of the Heukseol cultivar was 80 min up to the saturation point, those of the Dasan and Goami cultivars were 50 min, those of the Baekjinju and Keunseom cultivars were 30 min, and that of the Seolgaeng cultivar was 10 min. The water absorption was highest in the Keunseom cultivar (351.38%). The expansibility and soluble-solid contents were 226.97-551.08 and 5.56-21.05%, respectively. The hardness of the cooked rice was highest in the Heukseol cultivar (24.30 kg); conversely, the Hangangchal cultivar had the lowest value (7.49 kg). Goami was a hard cooked rice, except for the Heukseol cultivar. In the sensory evaluation of the cooked rice, the taste, texture, and overall preference were highest in the Baekjinju cultivar, the color was highest in the Seolgaeng cultivar, the flavor was highest in the Heukseol cultivar, and the appearance was highest in the Hangangchal cultivar. The Dasan and Keunseom cultivars yielded the lowest values in the sensory evaluation, except for texture.

• Korean Journal of Food Science and Technology
• /
• v.35 no.3
• /
• pp.405-409
• /
• 2003

This study was conducted to evaluate quality characteristics of noodles containing barley flour and ${\beta}$-glucan enriched fraction. Compared to 100% wheat flour, composite flours containing barley flour and ${\beta}$-glucan enriched fraction decreased initial pasting temperature and increased maximum peak viscosity. The noodles containing ${\beta}$-glucan enriched fraction exhibited somewhat darker color and lower values in cooked weight, volume, moisture content, and cooking loss. From the textural properties measured by texture analyzer, the noodles with 30% barley flour and ${\beta}$-glucan enriched fraction were similar to 100% wheat noodle in springiness value and significantly higher in gumminess, hardness, and chewiness. The results of sensory evaluation indicated that barley flour or ${\beta}$-glucan enriched fraction at levels up to 30% could be substituted for wheat flour without seriously depressing noodle quality. Cooking of raw noodle with ${\beta}$-glucan enrichment slightly increased total, insoluble, and soluble ${\beta}$-glucan content.

• Nuclear Engineering and Technology
• /
• v.7 no.3
• /
• pp.213-222
• /
• 1975

Immobilization of the second-cycle radioactive liquid wastes from a Purex process was developed with the blown asphalt (manufactured by Kukdong Shell Oil Company Ltd) to eliminate the possibility that the radioactive materials will be redispersed into the environment. Attempts to incorporate these wastes directly into the asphalt martrices without any pretreatment were not successful, as it was observed that the sulphuric acid in the waste oxidised the asphalt. Hence, the waste was treated with caustic soda and made alkaline prior to bituminization, so that it was found that this pretreatment made the waste compatible to the asphalt matrices. The pure blown asphalt samples irradiated with doses of 4.0$\times$10$^{7}$ rad showed no evidence of volume increase. The suitable temperature for incorporation of the alkaline wastes into blown asphalt was 180-20$0^{\circ}C$. The Products containing 50 wt% salts represented the following good properties viz., volume reduction (about 1.4), homogeneity, teachability etc. During the period of 131 day $s^{l37}$Cs from products containing 40wt% salts was leached at rates ranging from 2.70$\times$10-4 to 8.27$\times$10-4g/cm2_day but the rate for $^{90}$ Sr was lower by one to two orders of magnitude by distilled water. The leaching rates for $^{137}$ Cs and $^{90}$ Sr by sea water were slightly lower than by distilled water. Both of the leaching rates decreased with increasing pH.H.

• Culinary science and hospitality research
• /
• v.7 no.2
• /
• pp.181-194
• /
• 2001

Dried noodles was manufactured by wheat flour and saline solution mixture. At this time, saline solution mixture was used for simple saline solution and mixture(blending ratio of PNSO and emulsifier=2:1, w/w) of both pine needle seasoning oil (PNSO) manufactured by autoclaving method and food emulsifier. Water absorption ratio, volume expansion ratio and water soluble solid matters content were decreased, but cooking time was prolonged, respectively. According to, suitable treating amount of PNSO was 2-3%(w/w) level. On organoleptic test, the peculiar green color was appeared in cooked noodles of PNSO treating groups. The surface was slickly, chewy rheology and texture were improved at PNSO treating cooked noodle. During 20-30 minutes after cooking, chewy characteristics was maintained the treating groups more than PNSO 2%(w/w). At the result, this PNSO treatin dried noodle samples were suitable at the institutional food service as well as dining hal1 for the case of large scale's kitchen work.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.5
• /
• pp.899-904
• /
• 2004

The objectives of the experiment were to examine the effects of extrusion process variables on the yield of extruded ginseng extract and to determine the effect of ratio of extruded ginseng extract and microcrystalline cellulose on characteristics of spheronized granules by cold extrusion-spheronization process. Extrusion process variables observed were feed moisture (15, 22, 29%), die temperature (90 110 13$0^{\circ}C$) and screw speed (150 200, 250 rpm). The results showed that moisture content of dried ginseng significantly affected extraction yield (P<0.05). The less moisture content of the feed resulted in the higher yield of the extract. Moisture content of 15%, screw speed of 250 rpm and die temperature of 13$0^{\circ}C$ gave the highest yield of ginseng extract. Mean extraction yield of extruded ginseng using hot water extraction was greatly improved by extrusion process The extract yield of extruded ginseng was 43.5% which was higher than that of red ginseng (38.3%) and white ginseng (29.0%) produced by traditional process. It was possible to make from the mixture of microcrystalline cellulose (200 g) mixed with different concentration of 200 mL solution (0, 5, 20, 30 40 50 60% of ginseng extract with 59.2% dry solid) by using cold extrusion spheronization. When the concentration of ginseng extract Increased, the granulation yield was improved but friability and compression index were reduced. Ginseng extract such as saponin was completely released from spheronized granules in distilled water within 10 min. It can be concluded that spheroniged granule with ginseng extract could be packed in gelatin capsule since granules Possessed proper physical properties and quick release of saponin.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.3
• /
• pp.534-540
• /
• 2014

The analysis of the change in the herbal tea composition according to the difference in processing conditions result. Was slightly reduced crude is treated ash puffing process was relatively increased, moisture, crude protein, the solid elution rate than the roasting process. Benzopyrene content was significantly reduced to 0.18 ppb from 0.35 ppb. Generation of food $B({\alpha})P$ is mainly include the thermal decomposition of food cooking, when the processing which is a main component of food carbohydrate, protein, fat reason despite severe heat treatment as a whole is to be detected even though the $B({\alpha})P$ in this way is considered to be. Generally the taste, aroma and color did not show a big difference but tasted quite stuffy and the strong sour taste reduced its preference.