• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.4 no.1
• /
• pp.50-62
• /
• 1999

Sediment core samples recovered from the Korea Deep Ocean Study (KODOS)-97 area were divided into two or three units according to their distinct changes in sediment colors and chemical and physical properties. Analyses of radiolarian faunas in the sediments and $^{10}Be$ ratios in each unit were performed to reveal stratigraphic and paleoceanographic history of the study area. In the upper part of the sediments, Tertiary radiolarians were mixed at various proportions with Quaternary assemblages probably by reworking process of bottom current and benthic animals. Dissolution of radiolarians was severe in deeper depth and in the Unit III, only few of the fragments of corroded Tertiary radiolarians were detectable. The mid layer of the Unit I belonged to Collosphaera invaginata Zone, the time period of 0.21 Ma. The Unit II belonged to Collosphaera tuberosa Zone with the time period younger than 0.42 Ma which was observed above the Stylatractus universus Zone. The Unit III is assigned to Tertiary, which is younger than the Late Eocene. Composition analyses of radiolarian assemblage and $^{10}Be$ ratio data indicated hiatus periods of more than 3 My between late of Middle Miocene and Pliocene resulting from erosion and dissolution caused by Antarctic Bottom Water. Stratigraphic evidence from radiolaria was well correlated with $^{10}Be$ data. Sedimentation rate during Quaternary can be suggested as 0.15-0.5 mm per 1000 years. Dominance of warm-water radiolaria species and the results reflected minimum climatic changes of tropical conditions.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.21 no.1
• /
• pp.1-7
• /
• 2003

Practical use is increasing on the aerial ortho image recently, and much researches for geographic information system build that use high resolution satellite image cause this are progressing. Also many researches that use KOMPSAT-1 satellite image of resolution 6.6m are performing in these days, estimation for between aerial photo and satellite image is needed. In this treatise scanned image of aerial photo, using aerial photo resampling image of resolution equal with KOMPSAT-1 image using aerial photo, and KOMPSAT-1 satellite image use for experimental image making each orthoimage, classified feature for estimate. We evaluated to what level that an separation item could be able to estimate in each orthoimage. As result of estimation analysis, In the classified feature in aerial photo orthoimage with aerial photo resampling image orthoimage is about 61%, KOMPSAT-1 satellite image orthoimage is almost 41% could estimated. Through this investigation estimate, KOMPSAT-1 satellite sue to map updating, geographic information og non-approach area and environment inspect.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.32-32
• /
• 2008

X-ray detector는 의료용, 산업용 등 다양한 분야에서 사용되어지고 있으며 기존의 Analog X-ray 방식의 환경오염, 저장공간 부족, 실시간 분석의 어려움 등의 문제점들을 해결하기 위하여 Digital X-ray로의 전환과 연구가 활발하며 이에 따른 관심도 높아지고 있는 살점이다. Digital X-ray detector는 p-영역과 n-영역 사이에 아무런 불순물을 도핑하지 않은 진성반도체(intrinsic semiconductor) 층을 접합시킨 이종접합 PIN 구조의 photodiode 이다. 이 소자는 역바이어스를 가해주면 p영역과 n영역 사이에서 캐리어 (carrier)가 존재하지 않는 공핍 영역이 발생하게 된다. 이런 공핍 영역에서 광흡수가 일어나면, 전자-정공 쌍이 발생한다. 그리고, 발생한 전자-정공 쌍에 전압이 역방향으로 인가되는 경우, 전자는 양의 전극으로 이동하고, 정공은 음의 전극으로 이동한다. 이와 같이, 발생한 캐리어들을 검출하여 전기적인 신호로 변환 시킨다. 고해상도의 Digital X-ray detector를 만들기 위해서는 누설전류에 의한 noise 감소와 소자의 높은 안정성과 내구성을 위한 높은 breakdown voltage를 가져야 한다. 본 연구에서는 Digital X-ray detector의 leakage current 감소와 breakdown voltage를 높이기 위하여 guradring과 gettering technology를 사용하여 전기적 특성을 분석하였다. 기판으로는 $10k\Omega{\cdot}cm$ resistivity를 갖으며, n-type <111>인 1mm 두께의 4인치 Si wafer를 사용하였다. 그리고 pixel pitch는 $100{\mu}m$이며 active area는 $80{\mu}m{\times}80{\mu}m$인 $32\times32$ array를 형성하여 X-ray를 조사하여 소자의 특성을 평가 하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.641-642
• /
• 2013

This research implemented Geostationary Ocean Color Imager (GOCI) observation satellite imagery visualization system on a large high-resolution tiled display. This system is designed to help users observe or analyze satellite imagery more effectively on the tiled display using multi-touch and Kinect motion gesture recognition interaction. We developed the multi-scale image loading and rendering technique for the massive amount of memory management and smooth rendering for GOCI satellite imagery on the tiled display. In this system, the unit of time corresponding to the selected date of the satellite images are sequentially displayed on the screen. Users can zoom-in, zoom-out, move the imagery and select some buttons to trigger functions using both multi-touch or Kinect gesture interaction.

• Aerospace Engineering and Technology
• /
• v.10 no.2
• /
• pp.154-162
• /
• 2011

The KOrea Multi-Purpose Satellite-3 (KOMPSAT-3) provides 0.7 m Ground Sample Distance (GSD) panchromatic image and 2.8 m GSD multi-spectral image data for various applications. The KOMPSAT-3 system data will be applied in the field of earth observations, covering land, sea, coastal zones, and Geographic Information Systems (GIS). In order to keep the swath width of 15km at nadir view of KOMPSAT-3, CCD consist of approximately 24,020 pixels excluding 20 dark pixels at both sides and has overlap region. Because there are no CCD-line sensors with a pixel size of $7{\mu}m$, the field of view is separated into 2 parts and imaged on 2 detectors, each with 12,080 pixels. Therefore, 2 detectors have different geometric characteristic. This paper provides image simulation for geometric characteristics analysis of overlapping area of KOMPSAT-3 using KOMPSAT-2 image data.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.12
• /
• pp.89-96
• /
• 2023

In this paper, we propose a GPU-based method for real-time processing of dynamic re-meshing required for tearing cloth. Thin shell materials are used in various fields such as physics-based simulation/animation, games, and virtual reality. Tearing the fabric requires dynamically updating the geometry and connectivity, making the process complex and computationally intensive. This process needs to be fast, especially when dealing with interactive content. Most methods perform re-meshing through low-resolution simulations to maintain real-time, or rely on an already segmented pattern, which is not considered dynamic re-meshing, and the quality of the torn pattern is low. In this paper, we propose a new GPU-optimized dynamic re-meshing algorithm that enables real-time processing of high-resolution fabric tears. The method proposed in this paper can be used for virtual surgical simulation and physics-based modeling in games and virtual environments that require real-time, as it allows dynamic re-meshing rather than pre-split meshes.

• Korean Journal of Remote Sensing
• /
• v.39 no.6_3
• /
• pp.1679-1692
• /
• 2023

South Korea is a country that emits a large amount of pollutants as a result of population growth and industrial development and is also severely affected by transboundary air pollution due to its geographical location. As pollutants from both domestic and foreign sources contribute to air pollution in Korea, the location of air pollutant emission sources is crucial for understanding the movement and distribution of pollutants in the atmosphere and establishing national-level air pollution management and response strategies. Based on this background, this study aims to effectively acquire spatial information on domestic and international air pollutant emission sources, which is essential for analyzing air pollution status, by utilizing high-resolution optical satellite images and deep learning-based image segmentation models. In particular, industrial parks and quarries, which have been evaluated as contributing significantly to transboundary air pollution, were selected as the main research subjects, and images of these areas from multi-purpose satellites 3 and 3A were collected, preprocessed, and converted into input and label data for model training. As a result of training the U-Net model using this data, the overall accuracy of 0.8484 and mean Intersection over Union (mIoU) of 0.6490 were achieved, and the predicted maps showed significant results in extracting object boundaries more accurately than the label data created by course annotations.

• Journal of Korea Water Resources Association
• /
• v.54 no.2
• /
• pp.121-133
• /
• 2021

Suspended Solids (SS) generated in rivers are mainly introduced from non-point pollutants or appear naturally in the water body, and are an important water quality factor that may cause long-term water pollution by being deposited. However, the conventional method of measuring the concentration of suspended solids is labor-intensive, and it is difficult to obtain a vast amount of data via point measurement. Therefore, in this study, a model for measuring the concentration of suspended solids based on remote sensing in the Nakdong River was developed using Sentinel-2 data that provides high-resolution multi-spectral satellite images. The proposed model considers the spectral bands and band ratios of various wavelength bands using a machine learning model, Support Vector Regression (SVR), to overcome the limitation of the existing remote sensing-based regression equations. The optimal combination of variables was derived using the Recursive Feature Elimination (RFE) and weight coefficients for each variable of SVR. The results show that the 705nm band belonging to the red-edge wavelength band was estimated as the most important spectral band, and the proposed SVR model produced the most accurate measurement compared with the previous regression equations. By using the RFE, the SVR model developed in this study reduces the variable dependence compared to the existing regression equations based on the single spectral band or band ratio and provides more accurate prediction of spatial distribution of suspended solids concentration.

• Korean Journal of Mineralogy and Petrology
• /
• v.34 no.2
• /
• pp.121-131
• /
• 2021

Magnesium (Mg) present in carbonate minerals as impurities has been used as a geochemical proxy to infer the environmental conditions where the minerals precipitated. The reliability of Mg geochemical proxies requires fundamental understanding of Mg incorporation into minerals based on accurate speciation of Mg ²⁺ in the crystal structure, which is determined mainly by application of X-ray absorption spectroscopy (XAS). However, high uncertainties are involved in interpreting the XAS spectra of minerals containing trace amount of Mg ²⁺. Because density function theory (DFT) can predict an XAS spectrum for a crystal structure, DFT calculations can reduce the uncertainties in the interpretation of the XAS spectrum. In this study, we calculated ab initio Mg K-edge absorption spectra of Mg silicates and (hydr)oxides based on DFT and analyzed the correlation between the calculated spectra and Mg structural parameters. Our ab initio Mg K-edge absorption spectra well reproduced the key features of the experimental spectra. The absorption-edge positions of the calculated spectra showed the weak positive correlation with the average Mg-O bond distance or Mg effective coordination number. The current study shows that DFT-based core-level spectroscopy method is a powerful tool in providing standard Mg K-edge spectra of diverse Mg minerals and determining the Mg chemical species within carbonate minerals.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.11a
• /
• pp.40-40
• /
• 2000

우리나라의 제지산업은 천연펄프 자급능력이 20% 내외로서 낮은 실정이며 주원료의 7 70% 이상을 수입펄프와 고지에 의존하는 원료수급의 불균형이 심화된 상태이다 .. 1999년도 제지통계에 의하면 골판지 원지로 사용되는 라이너지와 골심지의 연간 생산량이 각각 169만 톤과 88만톤을 점유하여 국내 전체 지류생산량 887만톤의 약 29%를 점하고 있다. 이처럼 국내 제지산업에서 큰 비중을 차지하는 골판지 원지는 주로 국내에서 발생되는 고지를 원료 로 하여 생산되고 있어 환경친화적인 지류라 할 수 있다. 그러나, 국산 골판지 고지( Korean O Old Corrugated Container)의 경우 골판지 고지 이외에 각종 인쇄고지와 기타 산업용지가 혼합된 최하급지로서, 고지 재생 시 여러 가지 많은 제한요소를 지니고 있다. 국산 골판지 고지는 거듭된 재생처리로 인하여 미세분의 함량이 전체 지료의 절반에 달할 만큼 많으며, 아울러 섬유가 각질화됨에 따라 재생처리가 거듭될수록 그러한 미세분의 형성이 더욱 조장 되고 있다. 일반적으로 크기 75µm 이하의 무기질 및 단섬유를 일걷는 미세분은 골판지 원지 의 초지시 습지필의 탈수를 저해하여 생산성을 저하시키는 요인이 되어 왔다. 이러한 문제 를 해결하기 위해 선진국에서는 골판지 고지를 스크린 또는 클리너 둥으로 정선 처리하여 장단섬유를 분급한 다음, 장섬유분을 선택적으로 고해하여 종이의 강도를 향상시키는 기술 이 개발되어 적용돼 왔으나, 이러한 기술은 우리 나라와 같이 장섬유 보다 미세분 함량이 많은 저급의 골판지 고지를 주원료로 삼는 골판지 원지의 강도 개선에 큰 효과를 거둘 수 없는 기술이라고 판단된다. 이는 기존의 섬유 분급 처리는 고급 고지의 경우에는 효과적이 나 저급의 혼합고지를 100% 재활용하여 구성되는 국산 골판지의 생산 시에 적용하기에는 5 50-60%에 이르는 미세분이 포함되어 분리의 대상이 섬유장이 다른 펼프 섬유라기 보다는 미세섬유를 펄프섬유로부터 분리하는 것이 필요하기 때문이다. 이러한 문제점을 극복하기 위해서는 기포의 수력학적 포집작용을 이용하여 고농도의 미세분을 선택적으로 분급시키는 부상부 유 분급처리방법을 적용하였다. 이 방법은 미세분의 농축을 위한 부가적인 처리가 필요치 않으며, 분급에 천공을 이용하지 않기 때문에 분급처리 시 천공의 plugging 문제가 발생되 지 않는다는 장점도 가지고 있다. 미세분 분급을 위한 최적의 부상부유 조건은 장섬유의 응 집을 촉진하면서 미세분은 그러한 응집체에 포함되지 않은 상태로 자유로이 부상하여 걷혀 지는 경우이다. 응집거동을 조절하기 위한 시도로서 부상부유 처리시 유량을 달리한 실험결 과에 의하면 유량이 낮을수록 장섬유 손실이 줄고 미세분이 선택적으로 포집되나 전체 부상 부유 리젝트의 양이 줄어드는 문제점이 있었다. 이에 본 실험에서는 장섬유의 응집에 영향 하는 또 다른 인자로서 지료의 농도를 증가시키면서, 미세분의 부상부유를 촉진시키도록 유 량을 증가시키는 조건으로 부상부유 처리에 의한 미세분 분급효율을 증가시키고자 하였다.