• Journal of the Korean Electrochemical Society
• /
• v.21 no.4
• /
• pp.80-87
• /
• 2018

Safety issues in Li-ion battery system have been prime concerns, as demands for power supply device applicable to wearable device, electrical vehicles and energy storage system have increased. To solve safety problems, promising strategy is to replace organic liquid electrolyte with non-flammable solid electrolyte, leading to the development of all-solid-state battery. However, relative low conductivity and high resistance from rigid solid-solid interface hinder a wide application of solid electrolyte. Composite electrolytes composed of organic and inorganic parts could be alternative solution, which in turn bring about the increase of conductivity and conformal contact at physically rough interfaces. In our study, composite electrolytes were prepared by combining poly(ethylene oxide)(PEO) and $Li_7La_3Zr_2O_{12}$ (LLZO). The crystallinity, morphology and electrochemical performances were investigated with the control of LLZO contents from 0 wt% to 50 wt%. From the results, it is concluded that optimum content and uniform dispersion of LLZO in polymer matrix are significant to improve overall conductivity of composite electrolyte.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.4
• /
• pp.1253-1258
• /
• 2019

The solid-state electrolyte based on polymer is applicable to various electrochemical devices including supercapacitor, battery, sensor, actuator and has great attention to develop its ionic conductivity from conventional polymer electrolyte by uisng wide range of ionic liquids. The research about ion gel as a solid state electrolyte with the ionic liquid has focused on the wearable and flexible electronic device to use as the high electrical and electrochemical performances, mechanical strength of polymer. In this work, we have investigated and developed solid-state electrolyte based on the ionic liquid and polymer with enhanced ionic conductivity and stability.

• Electronics and Telecommunications Trends
• /
• v.36 no.3
• /
• pp.76-86
• /
• 2021

Technologies for lithium secondary batteries are now increasingly expanding to simultaneously improve the safety and higher energy and power densities of large-scale battery systems, such as electric vehicles and smart-grid energy storage systems. Next-generation lithium batteries, such as lithium-sulfur (Li-S) and lithium-air (Li-O₂) batteries by adopting solid electrolytes and lithium metal anode, can be a solution for the requirements. In this analysis of battery technology trends, solid electrolytes, including polymer (organic), inorganic (oxides and sulfides), and their hybrid (composite) are focused to describe the electrochemical performance achievable by adopting optimal components and discussing the interfacial behaviors that occurred by the contact of different ingredients for safe and high-energy lithium secondary battery systems. As next-generation rechargeable lithium batteries, Li-S and Li-O₂ battery systems are briefly discussed coupling with the possible use of solid electrolytes. In addition, Electronics and Telecommunications Research Institutes achievements in the field of solid electrolytes for lithium rechargeable batteries are finally introduced.

• Proceedings of the Korean Fiber Society Conference
• /
• 2001.10a
• /
• pp.314-315
• /
• 2001

전기 전도성 고분자는 폴리 아세틸렌을 적절한 electron withdrawing group이나 electron donating group을 이용하여 도핑하면 전도도의 증가를 가져온다는 보고 이래로 활발하게 연구되어져 왔다. 그 중에서 폴리피롤은 높은 전도도와 산화안정성, 인체에 무해한 특성 때문에 여러 분야에 응용되고 있으며 분자전자장치나 고체 배터리의 전극, 축전기의 고체 전해질, 전자파 차폐 재료, ion센서, 위장막의 제조 등의 용도전개 잠재력이 무궁하다. (중략)

• Journal of Sensor Science and Technology
• /
• v.7 no.5
• /
• pp.319-326
• /
• 1998

Anodic half-reaction in the $Na^+$ ionic sensors using $Na_2CO_3$ and $MCO_3$ ($M=Cs_2,K_2,Li_2,Ca$) as a sensitive membrane is derived in continuous flow system to explain $CO_2$ sensing characteristics. For various gas-sensitive membranes, a well known overall reaction, $MCO_3\;=\;MO\;+\;CO_2$, cannot be applied for the EMF behaviors of these kinds of sensors. So, the anodic reaction is found to involve $Na_2CO_3$ and $M^{++}$-containing oxide phases by employing the ion exchange reaction at the interface of solid electrolyte and the sensitive membrane to maintain ionic balance in the whole cell. Based on the electrode reaction derived in flow system, differences of cell potentials between continuous and discontinuous flow systems were also discussed. These EMF differences were considerably caused by the partial pressures of oxygen and $CO_2$ as well as irreversible chemical reactions between electrode materials and $CO_2$ atmosphere.

• Journal of Sensor Science and Technology
• /
• v.5 no.4
• /
• pp.25-34
• /
• 1996

A SOx sensor using NASICON electrolyte was developed for monitoring of air pollution. The following galvanic cell with $Na_{2}SiO_{3}(Pt)$ reference electrode was assembled : Pt | $Na_{2}SiO_{3}$ | NASICON | $Na_{2}SO_{4}$ | Pt, $SO_{2}$, air $Na_{2}SO_{4}$ was used as an indicator electrode to protect NASICON electrolytes from chemical reaction with $SO_{2}$. The EMFs were measured after injecting $SO_{2}$ in the initial concentrations range of $5{\sim}95ppm$ at $400{\sim}550^{\circ}C$. The measured and calculated potentials were in good agreement above $500^{\circ}C$. However, the cells were unstable below $500^{\circ}C$, most likely due to incomplete attainment of chemical equilibrium. Response time was within 10 min. Based on the stability and response time of this cell, the NASICON solid electrolyte with $Na_{2}SiO_{3}(Pt)$ as the reference electrode and $Na_{2}SO_{4}$ (Pt)as the indicator electrode showed the possibility of a reliable, inexpensive commercial solid-state SOx sensor.

• Electrical & Electronic Materials
• /
• v.8 no.6
• /
• pp.816-822
• /
• 1995

본 고에서는 지구환경문제에 관련된 가스와 그들의 검지를 위한 가스센서에 관하여 살펴보고자 한다. 환경오염을 방지하려는 노력과 대책이 전세계적으로 추진되고 있는 시점에서 특히 대기오염의 주범인 환경가스에 대한 고성능 센서의 개발은 필수불가결하다. 그러나 현재에 사용되고 있는 환경가스센서는 차량의 배기계통에 사용되는 산소센서나 연소배출가스를 검지하는 소수의 가스센서외에는 아직 실용화되지 못하고 있다. 따라서 고온, 부식등의 과혹한 조건하에서 안정하고, 고성능의 센서의 개발은 물론 센서를 구동시키는데 필연적인 신호처리 등 주변기술 또한 병행해서 발달되어야 할 것이다.

• Journal of Sensor Science and Technology
• /
• v.4 no.3
• /
• pp.22-29
• /
• 1995

Lithium ionic solid electrolyte was synthesized at $60^{\circ}C$ in $N_{2}$ ambience by sol-gel method, using tetraethyl orthosilcate, lithium methoxide, zirconium n-propoxide, and tributyle phosphate as precursors. The prepared material was dried and crushed into powder, and it was pressed into disk type samples. These samples were sintered at $900^{\circ}C{\sim}1100^{\circ}C$ for 50 hours. The physical characteristics of the samples were investigated by TG/DTA, SEM, AES and XRD methods. $CO_{2}$ sensor based on lithium ionic solid electrolyte was fabricated and its operational characteristics were measured. The sensing characteristics of the sensor sintered at $1000^{\circ}C$ shows the variation of e.m.f. about $35{\sim}63\;mV/decade$ for the variation of $CO_{2}$ concentration at $200^{\circ}C{\sim}300^{\circ}C$ of operating temperature, and good linearity for $300{\sim}6000\;ppm$.

• Journal of Sensor Science and Technology
• /
• v.11 no.4
• /
• pp.218-223
• /
• 2002

NASICON sensors that the NASICON electrolytes with various CaO amounts were sintered at low temperature($900^{\circ}C$), were fabricated to improve $CO_2$ sensitivity and stability in sensing behaviors. The manufactured device was shown good sensing characteristics and stability of output electromotive force at $250^{\circ}C$, comparatively low operating temperature.

• Journal of Sensor Science and Technology
• /
• v.3 no.2
• /
• pp.40-49
• /
• 1994

Potentiometric cell oxygen sensors using $CaF_{2}$ were fabricated for monitering the oxygen partial pressure in the low temperature range ($300^{\circ}C{\sim}$500^{\circ}C). The disk type oxygen sensors consist of a reference electrode: Air($O_{2}:21%$)|Pt, a solid electrolyte $CaF_{2}$, and a sensing metel Pt electrode. And the change in open circuit emf of the disk type cell was about 45mV for the oxygen concentration range, $0.1%{\sim}10%$, at the cell temperature of $400^{\circ}C$. Also, the reference electrode incorporated type sensor showed the change of 40mV for 0.1% to 10% oxygen partial pressure range.