• Journal of Industrial Technology
• /
• v.35
• /
• pp.67-71
• /
• 2015

Various structures of particles were prepared by electrospray technique. In this research, solid particles were formed by electrospraying a solution of ethanol containing polyvinyl and tetraethyl orthosilicate. During the electrospray process, the ethanol solvent was evaporated, resulting in the solidification of precursors, forming solid particles. Evaporation of ethanol solvent also enhanced the mass transport which facilitated the development of porous and hollow structures.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.1
• /
• pp.36-43
• /
• 1988

A two phase model for the simulation of flame propagation has been developed and applied to a mixture of coal air. The effects associated with changes in the initial coal partial equivalence ratio and the initial diameter of particles on the structure of laminar flame propagation have been studied qualitatively and quantitatively. Especially the flame structure, the burning velocity, and the thermal behavior were evaluated. It was found that the radiative heat transfer absolutely dominates over the conduction mode. The increase in particle size was seen to contribute to an obvious increase in burning velocity for fuel lean and stoichiometric mixture. But for fuel rich mixture, the burning velocity was found to exhibit a weaker dependence on particle size.

• Clean Technology
• /
• v.19 no.3
• /
• pp.212-218
• /
• 2013

The microparticles of 2-hydroxypropyl-${\beta}$-cyclodextrin (HP-${\beta}$-CD) were prepared using aerosol solvent extraction system (ASES) by employing supercritical carbon dioxide as an antisolvent, The effects of various process parameters such as temperature, pressure, solution concentration and solution flow rate on the formation of HP-${\beta}$-CD microparticles were investigated. The HP-${\beta}$-CD microparticles prepared by the ASES process were observed to consist of agglomerates of nano-sized (50-200 nm) particles. When an aqueous solution of ethanol was used as a solvent for HP-${\beta}$-CD, the HP-${\beta}$-CD particles were found to be spherical in shape and to become larger as the water content increased. It was confirmed that the micronization of HP-${\beta}$-CD using the ASES process could enhance the inclusion efficiency of ibuprofen/HP-${\beta}$-CD complexes significantly.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.5
• /
• pp.1104-1112
• /
• 1988

In this study the structure of a two phase detonation has been numerically investigated through the assumption of a steady and one-dimensional flow in the suspension of carbon particles and pure oxygen. The bow shock formation in front of carbon particles has been taken into consideration when the relative velocity of gas flow with respect to the particle exceeds the local speed of sound. But its effect was found to be very limited to the induction zone only. Furthermore the interior particle temperature distribution has been considered in this work. It was found that the inner temperature gradient was very steep in the region of high relative velocity. On the while the temperature distribution inside the particle was almost uniform in the region of low relative velocity. Overall, the effect of the interior particle temperature distribution has been significant in the two phase detonation.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.11a
• /
• pp.396-397
• /
• 2003

대기 중에는 가스상 물질뿐만 아니라 액적 또는 고체의 미립자도 존재하고 있다. 이러한 입자상 물질은 다른 크기와 화학적 조성을 가지는 입자들로 혼합되어 있고, 그 성상은 시간에 따라 크게 변동한다. 따라서 대기 중 미세입자에 대한 발생원 추정 및 발생원 정보를 얻기 위해서는 개개의 입자에 대한 물리ㆍ화학적 정보를 얻는 것이 중요하다. 입자상 물질을 이해하기 위해서는 물리적인 특성(size, shape 등)과 화학적인 특성이 중요한 요소이다. 입자상 물질의 형상은 그 발생원에 따라 또는 존재에 따라 매우 다양하고 불규칙적이다. (중략)

• 한국연소학회:학술대회논문집
• /
• 2012.04a
• /
• pp.93-96
• /
• 2012

In the industrial furnaces or reactors, entrainment of the material particles is one of the important issues from the point of view of efficient material-use. The particles of solid phase which has submicron unit are easily entrained with gas phase as a reacting agent or product, and it causes a loss of the material. In this study, wind-tunnel experiment is carried out to interpret the distribution of the particles entrained along the tunnel length. Through CFD-based computational analysis of the experiment, availability of result from the CFD analysis associated with particle size distribution and gaseous velocity to practical system is evaluated.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1996.05a
• /
• pp.85-93
• /
• 1996

비선형 해석의 중요성이 증가하고 있는 혼합형 고체 추진제의 비선형거동중 재료비선형에 대한 거시적/미시적 현상을 설명하고, 그 주요한 원인으로서 Mullin 효과와 결합제/충전미립자 사이의 접착분리(Dewetting)를 주로 고찰하였다. 이를 응용한 지금까지의 비선형 구성방정식의 개발동향을 검토하여 비교하였으며 최근에 제시되고 있는 손상변수를 분석하였다. 여러 변형률 크기에 대한 응력이완 모듈러스 실험을 통하여 변형률 크기가 손상변수로서 적합하지 않음을 보였으며, 변형률 크기에 따라 모듈러스의 저하가 크기 때문에 비선형 점탄성 해석이 중요한 문제임을 제시하였다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.1
• /
• pp.118-123
• /
• 1987

In relation to the dust detonatians which have imposed severe damages on the industry, the ignitability of various dusts has been investigated on a horizontal shock tube in this study. By using a newly designed air injector, very well-distributed clouds could be obtained. The proper reflected shock conditions have been generated by placing a reflector 1.5cm behind the air injector, which reflected the incident shock wave. The incident shock waves in the range of Mach number 2.8-3.3 created the postreflected shock temperature of 1200-1600K. Experimentally the ignition delay was defined as the time interval between the arrival of a reflected shock wave at dusts and the detection of visible light. Measured ignition delays of dusts investigated were located lower than 1msec under the above conditions. These values are one-order higher than those in the incident shock wave condition. In this type of ignitiion process the following three processes are considered to play important roles; heating of a particle, generation of volatile gas by endothermic devolatilization process, and its diffusion from the particle surface and the formation of stoichiometric mixture with oxidizer.

• Journal of Advanced Marine Engineering and Technology
• /
• v.24 no.3
• /
• pp.29-35
• /
• 2000

The present numerical study investigates heat transfer enhancement mechanism for suspensions of polystyrene particles in water. Numerical simulations were done for turbulent hydrodynamic fully developed flows in a circular duct with constant wall heat flux. The experimental result of microparticle suspensions show 25∼45% heat transfer enhancement over those of water. The present numerical results show the main parameter for the heat transfer enhancement of microparticle suspension in a circular duct is the change of velocity profile by the non-Newtonian fluid behavior.

• 발명특허
• /
• v.26 no.10 s.306
• /
• pp.76-83
• /
• 2001

본 발명은 승화성 고체 미립자 제트를 이용한 분사로 표면의 오염물을 제거하는 공정이다. 이는 극저온에서 고화된 입자가 표면에 고속 충돌 후 오염물을 제거하고 자신은 승화되어 잔사를 남기지 않는 청정 세척 공정을 말하는데 반도체 장비, 정밀 제품, 인쇄회로 기판 등의 다양한 표면의 각종 오염막 제거에 널리 사용될 수 있다. 본 장치의 특징은 세정 매체인 $CO_2$와 Carrier gas인 $N_2$를 사용하였고 현재 특허에 출원되어 있는 단순한 액체$CO_2$를 이용한 세정범위를 넘어 다양한 세정매체 즉, 복합인자($CO_2$ + ice, Ar + ice)를 이용하여 세정효율의 다변화를 이루었고 자체 개발한 냉동기를 이용하여 고화율이 액체 $CO_2$보다 상대적으로 낮은 기체 $CO_2$의 고화율을 증대 시킴으로써, 세정매체의 소모시간이 현격히 감소되어 원가절감 효과를 증대 시켰다. 세정대상물을 효과적으로 제거하기 위해 주 세정 매체인 $CO_2$의 수농도를 조절할 수 있는 Multi-Nozzle의 개발과 이로 인하여 세정력의 강도를 조절하도록 하였다. 세정 후 발생되는 오염입자를 효과적으로 제거하도록 국부 Exhaust를 Nozzle전단에 달아 재 오염의 방지효과를 극대화 시켰다.