• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.4
• /
• pp.12-17
• /
• 2018

A natural cavitation-type high-speed underwater vehicle with solid rocket motor is tested, and its speed and running distance are measured. The outputs from pressure sensors on the surface of the vehicle reveal a pressure-time history reflecting the development of supercavitation. Underwater cameras installed on the wall of the test pool record the entire process from the onset of supercavitation to its full development. CNU-SuperCT, based on two-dimensional inviscid theoretical analysis, is used to simulate test results. Considering CNU-SuperCT does not include the control fins of the vehicle, simulation results agree with test results very well. Additionally, pictures from underwater cameras support the test results.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.1
• /
• pp.15-23
• /
• 2019

In this study, an extinguishment model of a three-dimensional solid propellant rocket was developed by combustion and fast depressurization to control the thrust of a solid rocket. Computational fluid dynamics simulation was carried out to ascertain the change in flow patterns in the combustion chamber and the extinguishment process by using a pintle. An ammonium perchloride was used as the target propellant and the dynamic behavior of its major parameters such as temperature, pressure, and burning rate was predicted using the combustion model. The dynamic behavior of the combustion chamber was confirmed by fast depressurization from an initial pressure of 7 MPa to a final pressure of 2.5 MPa at a depressurization rate of approximately -912 MPa/s.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.04a
• /
• pp.35-35
• /
• 1998

고체 로켓 추진기관의 노즐을 개발하기 위해서는 주어진 체계 제한 조건내에서 기본적인 가스의 동력학, 내탄도에 의한 형상 설계, 재료 개발 및 적용 기술, 열전달 계산에 의한 열설계 및 해석 등이 종합적으로 적용되며 수많은 반복과정을 거쳐야 한다. 특히 최근에는 알루미늄 함유량을 증가시켜 연소가스의 온도가 300$0^{\circ}C$ 이상이 되는 고성능 추진제가 일반적으로 적용되고 있으므로 고온에 의한 열적문제가 심각하게 대두되고 있으며 이에 견디는 신뢰도가 높은 노즐 설계개발이 요구되고 있다. 노즐목을 노즐내에서 열부하가 가장 심한 곳으로 노즐목 확대에 의한 추력 손실을 최소화하기 위해 내삭마성이 강한 재료를 선정하여야 하며, 그래파이트는 이러한 조건을 만족시키는 소재의 하나로 많이 적용되고 있다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.24 no.4
• /
• pp.73-78
• /
• 2020

The main reasons that ignite the propellant in the process of producing solid rocket motor are worker mistakes, wrong working process, mechanical defects, impact, friction, electrostatic and short circuits. In the past decades, many accidents have occurred in the process of producing solid rocket motor, accidents investigation have confirmed that the sensitivity of electrostatic is very high under specific condition. In this paper, we analyzed overseas accident cases and measured the sensitivity of electrostatic in the situation of confinement and pressure load by considering the manufacturing process. As a result of the test, the sensitivity of propellant was increased in the situation of confinement and pressure load and the propellant reacted more sensitively to electrostatic in the situation of confinement than pressure load.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.497-500
• /
• 2011

The experimental study of thermal stress in the solid rocket engine nozzle with two different materials, SCM-440 and STS-630, was evaluated. SCM-440 has lager temperature increasing rate and higher temperature at the nozzle expansion region than STS-630. Thermal barrier efficiency and endurance of Zirconia coating were evaluated after making two more nozzles coated by Zirconica. Both coated materials showed about 70 percent higher thermal barrier efficiency than uncoated nozzles. Therefore, Zirconia coating using plasma spray method was useful in thermal safety at supersonic nozzle.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.26 no.3
• /
• pp.22-31
• /
• 2022

Existing Finocyl grain designs assume configurations and repeat the process of configuration modification and confirmation of the requirements through burn-back analysis. Such a design increases the design fatigue of workers and has a problem of different design completeness depending on capabilities. Therefore, this study devised an optimal design method that applied genetic algorithms to the Burn-back automation analysis program to solve the problem of existing design. For stable search, variable-offset and non-drawable configuration control techniques were developed. The program performance was verified through the searching neutral and double thrust grains.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.23 no.4
• /
• pp.30-35
• /
• 2015

In this paper, a theoretical study of low frequency non acoustic instability, the $L^*$ instability, of a solid rocket motor is investigated. The $L^*$ stability criterion is determined by analysing the $L^*$ stability curves of two very distinct propellants for five different geometrical combustors. The $L^*$ instability of two extreme fuels showed totally different behavior in terms of operating pressure of the combustor. A parametric study on the stability for different chamber volume and different throat area keeping constant $L^*$ is conducted and analyzed. It was found that one of the main parameters, the non-dimensional critical characteristic time, requires an enough margin from the critical $L^*$ stability curve.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.04a
• /
• pp.225-228
• /
• 2007

The objective of this study is to characterize design parameters of rocket igniters for composite, double base and nitramine propellant. Arc image furnace and fiber optics surface reflectometer were used to measure ignition delay time and reflected optical energy of several compositions of composite, double base and nitramine base rocket propellant at different pressure levels each other. The order of ignitability was double base > composite > Nitramine propellants at initial pressure of over 75 psia. The highest ignition energy was needed to ignite nitramine propellant, however, as the pressure increased up to the range of $75{\sim}400$ psia as the ignition delay time decreased abruptly. The absorbtion of radiation energy could be increased by the addition of small amount of opacifiers as carbon black, ZrC, WC and burning catalyst.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.6
• /
• pp.867-880
• /
• 2013

The development for a high speed underwater vehicle has been demanded for a long time, and it is possible to realize using supercavitation. This paper introduces the main technologies that are necessary to develop a supercavitating rocket system, such as "Supercavitation" and "Hydroreactive technology", and describes the operating concepts and principles for its components specifically. Russia has obtained the key technologies of supercavitation and hydroreactive fuel technology for the first time. Russia has developed a supercavitating rocket torpedo, Shkval, and it was in service since 90's. Iran collaborated with Russia to develop a supercavitating rocket torpedo 'Hoot' and finished a test recently. This paper describes the analysis results related with the cavitator based on the technical reports for Shkval of Russia and Hoot of Iran.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2005.11a
• /
• pp.162-166
• /
• 2005

A thermal resistance estimation of carbon/carbon composites used as the nozzle throat insert of solid rocket motor was performed using TPEM motor. Three types of TPEM motor and two types of propellant were employed. The ablation rate is higher for the higher chamber pressure and also higher for the higher concentration of oxidizing species in combustion gas, but it is lower for the higher material density.