• Proceedings of the Korean Vacuum Society Conference
• /
• 2009.02a
• /
• pp.191.2-191.2
• /
• 2009

• Clean Technology
• /
• v.16 no.2
• /
• pp.95-102
• /
• 2010

Sulfonic acid (-SO3H) functionalized mesoporous silica containing HMS, SBA 15(S15), MCM 41(M41) were synthesized by post-synthesis and co-condensation method. Their catalytic performance is tested by dehydration reaction of D-xylose to furfural. As a result, good conversion and selectivity was obtained using water as an environmentally friendly solvent. Additionally, increased amounts of sulfuric acid in catalysts resulted in improved conversion of D-xylose. All of the acid-functionalized mesoporous silica showed higher selectivity than other solid acids such as ${\gamma}-Al_{2}O_{3}$ and zeolite.

• Clean Technology
• /
• v.21 no.2
• /
• pp.130-139
• /
• 2015

The NO oxidation process has been applied to improve a removal efficiency of NO included in exhaust gas. In this study, to produce a dry oxidant for the NO oxidation process, the catalytic H₂O₂ decomposition method was proposed. A variety of the heterogeneous solid-acidic Mn-based catalysts were prepared for the catalytic H₂O₂ decomposition and the effect of their physico-chemical properties on the catalytic H₂O₂ decomposition were investigated. The results of this study showed that the acidic sites of the Mn-based catalysts has an influence on the catalytic H₂O₂ decomposition. The Mn-based catalyst having the abundant acidic sites within the wide temperature range in NH₃-TPD shows the best performance for the catalytic H₂O₂ decomposition. Therefore, the NO oxidation efficiency, using the dry oxidant produced by the H₂O₂ decomposition over the Mn-based catalyst having the abundant acidic properties under the wide temperature range, was higher than the others. As a remarkable result, the best performances in the catalytic H₂O₂ decomposition and NO oxidation was shown when the Mn-based Fe₂O₃ support catalyst containing K component was used for the catalytic H₂O₂ decomposition.

• Korean Chemical Engineering Research
• /
• v.48 no.6
• /
• pp.684-689
• /
• 2010

We synthesized a variety of SAPO catalysts with various structure directing agents by the hydrothermal method and applied them to the D-xylose dehydration. Single or mixtures of organic amines, viz. tetraethylammonium hydroxide(TEAOH), dipropylamine(DPA), diethylamine(DEA), morpholine and diethanolamine(DEtA) were used as structure directing agents. The $N_2$-isotherm, $NH_3$-temperature programmed desorption(TPD) and temperature programmed oxidation(TPO) were conducted to characterize SAPO catalysts. Among tested SAPO catalysts, the SAPO-34 synthesized with morpholine showed the highest furfural yield. The external surface area as well as the surface concentration of acid sites appeared to affect the catalytic activity for the dehydration of xylose into furfural.

• Applied Chemistry for Engineering
• /
• v.22 no.6
• /
• pp.587-593
• /
• 2011

As a result of increasing environmental concerns related to air quality and maintenance of automobiles, the alkylation of isobutane with olefins has become an even more important process for production of high quality gasoline. However, the widespread use of the alkylation process is limited by the polluting and corrosive liquid acid catalysts (HF and $H_2SO_4$) currently used in industry. For the reason, a large number of solid catalysts, especially zeolites, have been studied as an environmental friendly catalyst in this process. Recently, mesoporous solid acids and ionic liquids have been investigated as a green catalyst. In this review, the research of environmental friendly catalysts for an isobutane alkylation is summarized.

• Korean Chemical Engineering Research
• /
• v.46 no.1
• /
• pp.194-199
• /
• 2008

In this study, the effective method to esterify the free fatty acids in jatropha oil was examined. Compared to other plant oils, the acid value of jatropha oil was remarkably high, 11.5 mgKOH/g. So direct transesterification by a base catalyst was not suitable for the oil. After the free fatty acids were esterified with methanol, jatropha oil was transesterified. The activities of four solid acid catalysts were tested and Amberlyst-15 showed the best activity for the esterification. After constructing the experiment matrix based on RSM and analyzing the statistical data, the optimal esterification conditions were determined to be 6.79% of methanol and 17.14% of Amberlyst-15. After the pretreatment, jatropha biodiesel was produced by the transesterification using KOH in a pressurized batch reactor. Jatropha biodiesel produced could meet the major specifications of Korean biodiesel standards; 97.35% of FAME, 8.17 h of oxidation stability, 0.125% of total glycerol and $0^{\circ}C$ of CFPP.

• KSBB Journal
• /
• v.4 no.2
• /
• pp.99-103
• /
• 1989

The kinetics of secondary hydrolysis of hemicellulose prehydrolyzate by a solid superacid, Nafion, was investigated. The maximum attainable xylose yields determined from continuous column reactor operation were about 90%. Nafion was found to be a stable hydrolytic catalyst provided that the feed solution was free of cationic substances.

• Korean Chemical Engineering Research
• /
• v.60 no.3
• /
• pp.414-422
• /
• 2022

The objective of this work was to investigate the feasibility of acid-catalyzed hydrothermal fractionation for maximum solubilization of the hemicellulosic portion of two typical agricultural residues. The fractionation conditions converted into combined reaction severity (CS) in the range of 1.2-2.9 was used to establish a simple reaction criteria at glance. The hemicellulosic sugar yield of 56.6% was shown when rice straw was fractionated at the conditions at the conditions; 160 ℃ of temperature 0.75% (w/v) of H₂SO₄, 20 min of reaction time, 1:15 solid/liquid ratio. The hemicellulosic sugar yield of 83.0%, however, was achieved when barley straw was fractionated at the conditions at the conditions; 150 ℃ of temperature 0.75% (w/v) of H₂SO₄, and 15 min of reaction time, 1:10 solid/liquid ratio. For barley straw, acid-catalyzed hydrothermal fractionation could be effectively performed. After the fractionation process, the remaining fractionated solids were 48.5% and 57.5% from raw rice and barley straws, respectively. The XMG contents in the solid residues decreased from 17.3% and 17.6% to 6.0% and 2.6%, which corresponded to 16.7% and 8.5% on the basis of the raw straws, respectively. In another way, only 5.6% of cellulose and 8.5% of XMG were lost due to excessive decomposition during the acid-catalyzed hydrothermal fractionation of barley straw, compared to cellulose and XMG losses of 6.4% and 26.6% in rice straw. Hemicellulosic sugars from the rice straw were considered more over-decomposed due to the somewhat higher reaction severity at the acid-catalyzed hydrothermal fractionation.

• Applied Chemistry for Engineering
• /
• v.31 no.4
• /
• pp.383-389
• /
• 2020

Mesoporous silica solid catalysts modified with sulfonic acid were prepared for cationic ring-opening polymerization of octamethylcyclotetrasiloxane (D₄). Two sets of MCM-41 (1.7 and 2.8 nm) and SBA-15 (8.1 and 15.9 nm) with different pore sizes were used as catalyst supports. The surface of silica materials was modified with (3-mercaptopropyl)trimethoxysilane by silylation reaction and oxidized to sulfonic acid. The structures of the prepared catalysts were examined by X-ray diffraction and nitrogen adsorption-desorption. The pore size, specific surface area, and pore volume of the modified solid catalysts decreased slightly. In addition, the modification of the sulfonic acid on the silica surface was confirmed by using infrared spectroscopy and nuclear magnetic resonance spectroscopy. To observe the effect of the particle size on the catalytic activity, it was observed with a scanning electron microscope. The catalysts were used to synthesize PDMS through a ring-opening polymerization of D₄, and the conversion and polymerization rate of the polymerization reaction depended on the pore size, specific surface area, particle size, and particle agglomeration of the catalysts. In order for the polymerization rate, the catalyst prepared with SBA-15 of 8.1 nm pore size had the fastest reaction rate and showed the best catalytic activity.

• Korean Chemical Engineering Research
• /
• v.49 no.2
• /
• pp.155-160
• /
• 2011

Dimethyl ether draws an attention as a green fuel in recent years. In this study, we investigated dehydration of methanol to produce DME using solid-acid catalysts, a series of zeolite. We found that ceria took a role of promoting the reaction conversion as well as selectivity of DME formation as a cocatalyst to the zeolite catalyst. We varied Si/Al ratio and ceria percentage on the surface of the catalyst to get high performance catalyst. ZSM5-30 with 5 wt% ceria on the surface was found to have excellent DME selectivity and to be little influenced by water content in methanol feed. We proposed a reaction model and obtained kinetic parameters for the DME formation using the catalyst based on experimental results using a microreactor.