• Korean Chemical Engineering Research
• /
• v.60 no.3
• /
• pp.414-422
• /
• 2022

The objective of this work was to investigate the feasibility of acid-catalyzed hydrothermal fractionation for maximum solubilization of the hemicellulosic portion of two typical agricultural residues. The fractionation conditions converted into combined reaction severity (CS) in the range of 1.2-2.9 was used to establish a simple reaction criteria at glance. The hemicellulosic sugar yield of 56.6% was shown when rice straw was fractionated at the conditions at the conditions; 160 ℃ of temperature 0.75% (w/v) of H₂SO₄, 20 min of reaction time, 1:15 solid/liquid ratio. The hemicellulosic sugar yield of 83.0%, however, was achieved when barley straw was fractionated at the conditions at the conditions; 150 ℃ of temperature 0.75% (w/v) of H₂SO₄, and 15 min of reaction time, 1:10 solid/liquid ratio. For barley straw, acid-catalyzed hydrothermal fractionation could be effectively performed. After the fractionation process, the remaining fractionated solids were 48.5% and 57.5% from raw rice and barley straws, respectively. The XMG contents in the solid residues decreased from 17.3% and 17.6% to 6.0% and 2.6%, which corresponded to 16.7% and 8.5% on the basis of the raw straws, respectively. In another way, only 5.6% of cellulose and 8.5% of XMG were lost due to excessive decomposition during the acid-catalyzed hydrothermal fractionation of barley straw, compared to cellulose and XMG losses of 6.4% and 26.6% in rice straw. Hemicellulosic sugars from the rice straw were considered more over-decomposed due to the somewhat higher reaction severity at the acid-catalyzed hydrothermal fractionation.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• v.y2005m4
• /
• pp.66-71
• /
• 2005

In this study the regression rate of hybrid rocket fuel has been investigated by two methods. First method is to use swirl injectors for enhancement of regression rate. And second method is the modification of the helical grain deriving improvement of combustion area and generating swirl flow. Tests have been done with PMMA and gaseous oxygen. In this paper the incline angle of the helical grain was varied to find the optimal condition to obtain the max regression rate for a given operational condition.

• Applied Biological Chemistry
• /
• v.37 no.5
• /
• pp.315-319
• /
• 1994

Use of a solid superacid (Nafion) in hydrolysis of rice straw was investigated focusing on the fermentability of the hydrolyzates by Pichia stipitis CBS 5776. Comparisons were made with the hydrolyzates produced by a conventional method of sulfuric acid treatment. The Nafion-catalyzed hydrolyzates of rice straw exhibited low level of inhibition for both cell growth and fermentation in comparison to the hydrolyzates produced by sulfuric acid. Pichia stipitis cells were able to produce ethanol by fermentation of Nafion-catalyzed hydrolyzates when the inoculum level exceeded 3.2 g dry cells/l.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.331-334
• /
• 1999

본 논문에서는 경남산 고령토를 이용하여 고 실리카 제올라이트인 ZSM-5를 조제하는 방법에 대하여 검토한다. KOH를 알칼리 종으로 하여 ZSM-5를 합성하였다. 또한 수열합성을 위한 장치를 제작하여 회전속도 및 반응온도를 제어하였다. Si$_2$/Al$_2$O$_3$의 몰비와 $K_2$O/SiO$_2$의 몰비에 따른 결정생성물의 영역을 밝혔다. 또한, 생성된 ZSM-5를 SEM 및 X선 회절장치로 확인하였다. 또한, 반응시간에 따른 고체회수율 및 ZSM-5의 펴크강도를 관찰하였다. 또한, ZSM-5의 생성을 위한 반응시간을 알았고, ZSM-5가 소멸되기 시작하는 시간을 알았다. 또한 ZSM-5는 SiO$_2$/A1$_2$O$_3$의 몰비의 증가 및 반응시간의 증가에 의해 $\alpha$-Quartz로 전환되어짐을 알았다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.248.1-248.1
• /
• 2010

수송용 바이오연료로써 바이오디젤의 보급 활성화에 따른 원료인 식물성 기름의 가격 상승 및 수급 불안정성 문제를 해결하고자 그동안 활용되지 않았던 폐유지를 바이오디젤 생산 원료로 사용하여 바이오디젤 생산 단가를 낮추고 원료의 수급 안정성도 확보하려는 시도가 이루어지고 있다. 폐유지의 경우 대부분 유리지방산 함량이 높아 염기 촉매를 적용하는 방법으로는 비누의 생성으로 전환이 힘들며 산 촉매를 적용하여 유리지방산을 에스테르화하는 공정을 필요로 한다. 에스테르화 반응에서는 반응 부산물로 물이 생성되며, 생성된 물은 바이오디젤 생산 반응을 저해하고 역반응을 유도하며 촉매의 활성을 감소시킨다. 본 연구에서는 고유리지방산 함량 오일의 에스테르화 반응에서 수분의 영향을 검토하였다. 산 촉매로 액상 촉매인 황산과 고체 산 촉매인 Amberlyst-15를 사용하였다. 초기 수분 함량이 0, 1, 2, 5, 10, 20%로 증가하였을 때, 지방산 메틸 에스테르 함량이 크게 감소하였으며, 1%의 수분 함량에서도 반응이 크게 저해받는 것으로 나타났다. 따라서 고유리지방산 함량 오일의 에스테르화 반응에서 수분에 의한 저해가 중요한 변수라는 것을 알 수 있다. Amberlyst-15는 황산보다 수분의 영향에 의해 지방산 메틸 에스테르 함량이 빠르게 감소하였다. 이는 다공성의 Amberlyst-15에서 생성된 물이 반응물질들이 active site에 접근하는 것을 방해하였기 때문인 것으로 생각된다. 황산을 사용하였을 경우에는 오일 대 메탄올 몰비를 1:3에서 1:6으로 증가시킴으로써 정반응 속도가 증가하여 수분에 대한 영향이 감소하는 현상이 나타났다. 에스테르화 반응 종료 12시간 후에 바이오디젤과 메탄올 내에 수분 함량을 분석한 결과 12%의 수분이 바이오디젤 층에 존재하며 88%의 수분은 메탄올 층에 존재하였다. 반응 중에 생성된 수분을 제거하기 위해, 에스테르화 반응 30분 후에 물을 포함하는 메탄올과 촉매 층을 새 메탄올과 촉매로 교환하는 2단계 반응을 수행함으로써 지방산 메틸 에스테르 함량을 향상시킬 수 있었다. 반응 초기에는 황산이 Amberlyst-15보다 높은 활성을 보였지만, 시간이 지날수록 두 촉매 사이의 에스테르화 성능 차이는 감소하였다. 따라서 2단계 에스테르화 반응이 수분의 저해작용을 줄이는 한 가지 대안으로 제안될 수 있다. 또한 에스테르화 반응에서 물의 저해 작용을 줄이기 위해 앞으로 투과증발막의 적용 또는 물에 저해작용을 받지 않는 구조의 촉매 사용을 검토할 필요가 있다.

• Korean Journal of Food Science and Technology
• /
• v.47 no.5
• /
• pp.567-573
• /
• 2015

In this study, volatile compounds in nine commercial Japanese distilled liquors (Shochu) were isolated by headspace solid-phase microexrraction (SPME) and analyzed by gas chromatography (GC) and GC-mass spectrometry (MS). A total of 76 volatile components, including 48 esters, 13 alcohols, and 15 miscellaneous components, were identified. Esters and alcohols constituted the largest groups of quantified volatiles. Differences in volatile components among the distilled liquors and possible sample grouping were examined by applying principal component analyses to the GC-MS data sets. The first and second principal components explained 77.92% of the total variation across the samples. The samples using barley koji showed higher overall concentrations of total volatile components. Additionally, the principal component analysis did not reveal any sample grouping based on the raw material used.

• Korean Chemical Engineering Research
• /
• v.48 no.6
• /
• pp.684-689
• /
• 2010

We synthesized a variety of SAPO catalysts with various structure directing agents by the hydrothermal method and applied them to the D-xylose dehydration. Single or mixtures of organic amines, viz. tetraethylammonium hydroxide(TEAOH), dipropylamine(DPA), diethylamine(DEA), morpholine and diethanolamine(DEtA) were used as structure directing agents. The $N_2$-isotherm, $NH_3$-temperature programmed desorption(TPD) and temperature programmed oxidation(TPO) were conducted to characterize SAPO catalysts. Among tested SAPO catalysts, the SAPO-34 synthesized with morpholine showed the highest furfural yield. The external surface area as well as the surface concentration of acid sites appeared to affect the catalytic activity for the dehydration of xylose into furfural.

• Korean Journal of Food Science and Technology
• /
• v.23 no.3
• /
• pp.360-365
• /
• 1991

Effect of random interesterification on the physicochemical properties in blends of corn germ oil and fully hydrogenated soybean oil was studied. Interesterification by using 0.4% sodium methoxide at $80^{\circ}C$ was completed in 35 minutes as determined by HPLC analysis for triglyceride composition. Changes of melting point, solid fat content, crystal form, fatty acid and triglyceride composition was investigated. After the interesterification, melting point and solid fat content were decreased, and coarse and large crystals were modified to fine and uniform. Fatty acid composition was not altered but triglyceride composition was largely altered. Interesterified blends of corn germ oil and fully hydrogenated soybean oil made with 80%, 20% and 75%. 25%, respectively, had desirable characteristics of the margarine for home use.

• Journal of the Korean Chemical Society
• /
• v.53 no.5
• /
• pp.505-511
• /
• 2009

Water soluble ZnS nanocrystals were synthesized by capping the surface of the nanocrystals with valine and alanine molecules, which are structurally simple and bio friendly amino acids. The obtained ZnS nanocrystal powders were characterized by XRD, HR-TEM, and EDXS spectroscopies. The measured particle sizes by HR-TEM images were in the range of 3.3 to 3.6 nm. In addition, the surface capping amino acids molecules were characterized by FT-IR and FT-Raman spectroscopies.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.158-166
• /
• 2004

The optimal conditions are obtained for the decomposition of solid radioactive wastes, including ion exchange resin, zeolite, active charcoal, and sludge from nuclear power plant. In the process of decomposing the radioactive wastes were used the microwave acid digestion method with mixed acid. The solution after acid digestion by the following method was colorless and transparent. Each solution was analyzed with ICP-AES and AAS and the recovery yield for 5 different elements added the simulated radioactive wastes were over 94%. As an effective pre-treatment, the proposed microwave acid digestion conditions concerning the chemical trait of each radioactive waste are expected to be generally applied to above-mentioned radioactive wastes from nuclear power plant hereafter.