• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.1
• /
• pp.32-38
• /
• 2001

Although the ultrasonic method has been developed and used widely in the fields, it has been used only for measuring the defect size and thickness loss. In this study, the relationship between surface wave attenuation through micro-crack growth and variation of velocity under repeated cyclic loading has been investigated. The specimens are adopted from 2.25Cr-1Mo steel, which is used for power plant and pipeline system, and have dimensions of $200{\times}40{\times}4mm$. The results of ultrasonic test with a 5MHz transducer show that surface wave velocity gradually decreases from the point of 60% of fatigue life and the crack length of 2mm with the increasing fatigue cycles. From the results of this study, it is found that the technique using the ultrasonic velocity change is one of very useful methods to evaluate the fatigue life nondestructively.

• Journal of Industrial Technology
• /
• v.19
• /
• pp.25-29
• /
• 1999

Rotary bending fatigue tests were carried out to investigate the fatigue behavior of high performance ductile cast iron experienced super rapid induction heat treatment. The effect of super rapid induction treatment on fatigue limit was experimentally examined with the special focus on the variation surface microstructure and the fatigue crack initiation and propagation through fractography. Main results obtained are as follows. By super rapid induction treatment in FCD500, the martensite structure obtained through conventional quenching heat treatment was confirmed on the specimen surface. The fatigue crack initiation in the hardened surface layer was restricted by the martensite structure and compressive residual stress. Thus, it could be interpreted that the initiation stress would be increased by the improvement of surface structure. The fatigue crack propagation in the hardened layer was retarded by the presence of the globular shape martensite around the graphite nodule and compressive residual stress. The crack propagation path has shown zigzag pattern in the hardened surface layer.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2015.10a
• /
• pp.1765-1768
• /
• 2015

3D 디스플레이 기술이 발달함에 따라 3 차원 공간에서의 뇌-컴퓨터 인터랙션 기술에 대한 관심이 높아지고 있다. 3D 디스플레이 기술은 사용자에게 실재감과 몰입감을 부여하여 특정 태스크를 수행할 때 사용자 태스크 퍼포먼스를 향상시킬 수 있다. 이와 같은 3D 입체감이 주는 긍정적 효과에 대한 연구는 교육, 주의력 향상, 엔터테인먼트를 목적으로 하는 뇌-컴퓨터 인터랙션 분야에서도 활발히 이루어지고 있다. 뇌-컴퓨터 인터랙션을 구성하는 뇌파성분에는 시각, 청각, 촉각 유발지속전위, 사건유발전위, 사건관련 동기/비동기화 성분, 느린 피질전위 등이 있다. 이 중 시유발 지속전위를 이용한 뇌-컴퓨터 인터랙션 기술은 오브젝트 콘트롤을 위한 사전훈련이 거의 요구되지 않으며 높은 정보전달율을 가지는 것을 특정으로 하기 때문에 최근 널리 사용되고 있다. 그러나 저주파수 대역의 명멸자극이 유발하는 피로감으로 인해 사용시간이 제한적인 한계점이 있다. 따라서, 본고에서는 유발뇌파의 일종인 시유발지속전위를 이용한 뇌-컴퓨터 인터랙션 기술을 소개하고 3D 홀로그램 인터랙션 수행 시 피로감을 최소화할 수 있는 방안에 대해 논의 하고자 한다.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.439-440
• /
• 2015

유도가열은 석유, 가스 등의 연료를 사용하는 종래의 설비에 비해 에너지 효율이 높고 관리가 수월하며, 공해를 유발하지 않는 등의 많은 장점으로 인해 산업 분야에 다양하게 응용되어 사용하고 있다. 유도가열의 원리는 전자유도작용을 이용하여 와전류에 의한 손실과, 히스테리시스 손실에 의한 주울열이 발생하는데, 이렇게 발생된 열로 가열하는 방법이며 가열 속응성, 고효율, 친환경, 안정성의 장점을 갖는다. 그러나 공진형 유도가열 인버터 시스템은 환경의 변화나 피가열체의 부식 등의 이유로 공진주파수가 변하는 단점이 있다. 따라서 기존의 단점을 극복하기 위해 자동으로 공진점을 추종할 수 있는 알고리즘을 제안하였고, 기존의 복잡한 제어회로나 알고리즘을 극복하여 시스템의 간소화를 실현하였다.

• Journal of Advanced Navigation Technology
• /
• v.23 no.1
• /
• pp.69-76
• /
• 2019

In this paper, a design method for an enhanced-sensitivity microwave sensor based on microstrip defected ground structure was studied for the permittivity measurement of planar dielectric substrates. The proposed sensor was designed by modifying the ridge structure of an H-shaped aperture into the shape of a capacitor symbol. The sensitivity of the proposed sensor was compared with that of a conventional sensor based on a double-ring complementary split ring resonator(DR-CSRR). Two sensors were designed and fabricated on a 0.76-mm-thick RF-35 substrate so that the transmission coefficient would resonate at 1.5 GHz in the absence of the substrate under test. Five types of taconic substrates with a relative permittivity ranging from 2.17 to 10.2 were selected asthe substrate under test. Experiment results show that the sensitivity of the proposed sensor, which is measured by the shift in the resonant frequency of the transmission coefficient, is 1.31 to 1.62 times higher than that of the conventional DR-CSRR-based sensor.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.10
• /
• pp.63-71
• /
• 2009

In this study, we propose a revised dynamic ROI (Region-of-Interest) coding method in which the focused ROI is automatically extracted without help from users during the recovery process of low DOF (Depth-of-Field) JPEG2000 image. The proposed method creates edge mask information using high frequency sub-band data on a specific level in DWT (Discrete Wavelet Transform), and then identifies the edge code block for a high-speed ROI extraction. The algorithm scans the edge mask data in four directions by the unit of code block and identifies the edge code block simply and fastly using a edge threshold. As the results of experimentation applying for Implicit method, the proposed method showed the superiority in the side of speed and quality comparing to the existing methods.

• Journal of the Korean Society for Heat Treatment
• /
• v.11 no.4
• /
• pp.247-257
• /
• 1998

In order to evaluate the relation between prior structure and fatigue strength on a induction surface hardened medium carbon steel(SAE1050M) for automotive drive shafts, torsional fatigue test were conducted with various cases of different hardened depths and applied loads. Prior structures of the steel such as pearlite, fine pearlite and spheroidal pearlite were prepared by conventional nomalizing, tempering after quenching and spheroidized annealing, respectively. Maximum torsional fatigue strength can be obtained when the case depth is 18~25% diameter of the bar in each prior structure. The effect of case depth on the torsional fatigue strength was different depending on applied load to specimen, but the most good fatigue life was shown in the case of pearlitic structure when the case depth was 4.0~5.5mm(18~25% of bar diameter). Among three different prior structures, energy consumption, to obtain high strength or to get the same case depth, was the most saved in the case of pearlitic structure.

• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.1
• /
• pp.60-65
• /
• 2004

Induction heating system is time varying system around curie point. So, it has many troubles which are system shut down and change the load impedance. In this paper has been designed the parallel resonant inverter which controlling the constant power and tracking the load resonant frequency with PLL is possible, in order to minimize switching losses and solve it's many troubles. The current full-bridge type parallel resonant inverter of an induction heating system was composed of IGBT in switching device. For regulating the output power of an induction heating system, the Fuzzy logic controller is used. The Fuzzy controller makes the control signal for a stable power regulating control and when reference is changed, it is superior to adaptability. It has been evaluated a stable behavior for a noise with switching and a load disturbance.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.41.1-41.1
• /
• 2009

최근 금형은 자동차뿐만 아니라 여러 산업에서 필수적이며 제품의 품질은 물론 제조원가에 막대한 영향을 미친다. 이러한 금형은 침탄, 질화, 고주파담금질등에 의해 표면처리 되어져 왔으나, 이와 같이 기존의 처리 방법은 모두 처리물 전체를 가열하거나 균일한 가열을 하지 못하기 때문에 변형의 문제와 처리후의 후가공의 경비 문제, 그리고 극히 일부분만 경화가 필요한 부품에는 적용하기 어려운 문제점이 있다. 이러한 문제를 해결할 수 있는 표면처리로서 레이저 표면처리 방법이 대두되고 있으며, 레이저 표면처리는 레이저 빔을 피처리물의 표면에 조사하고 적당한 속도로 이동을 하게 되면 레이저조사부위가 급속하게 가열되고 레이저빔이 통과한 후에는 표면의 열이 내부로 열전도 되어 급속히 자기냉각(Self-quenching)됨으로서 표면에 새로운 기계적 성질을 갖게 하는 표면처리법이다. 이와 같이 레이저를 이용한 표면처리로 기존의 CW Nd:YAG 레이저 열원보다 효율이 좋은 HPDL(High Power Diode Laser)를 이용한 고효율, 고기능 금형 표면처리 후 재료적 물성을 평가하고자 한다. 평가방법은 레이저빔의 조사속도 및 온도변화에 따른 표면처리부, 열영향부 그리고 모재 부분에 대한 경도특성 및 미세조직 변화를 관찰하였다. 또한 조사속도 및 온도변화에 대해 경화깊이를 관찰하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.5
• /
• pp.600-607
• /
• 2011

Recently, high carbon steel has become essential not only for shipbuilding parts, but also mass production. Its surface has been treated by carburizing, nitriding and induction hardening, but these existing treatments cause considerable deformation and increase the expense of postprocessing after treatment; furthermore, these treatments cannot be easily applied to parts that requiring the hardening of only a certain section. This is because the treatment cannot heat the material homogeneously, nor can it heat all of it. Laser surface treatment was developed to overcome these disadvantages, and when the laser beam is irradiated on the surface and laser speed is appropriate, the laser focal position is rapidly heated and the thermal energy of surface penetrates the material after irradiation, finally imbuing it with a new mechanical characteristic by the process of self-quenching. This research estimates the material characteristic after efficient and functional surface treatment using HPDL, which is more efficient than the existing CW Nd:YAG laser heat source. To estimate, microstructural changes and hardness characteristics of two parts (the surface treatment part, and parental material) are observed with the change of laser beam speed and surface temperature.