• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2232-2234
• /
• 2005

배전 계통에서는 전동기의 시동 전류, 변압기의 여자돌입전류, 콘덴서의 고주파 과도 돌입전류 등의 과전류가 흐르므로, 회로 보호용 한류 퓨즈가 엘리먼트의 피로나 열화 등에 의해, 예기치 못한 용단이 발생한다. 이 경우 고장을 미연에 방지하기 위해, 한류 퓨즈의 신뢰성을 보다 향상시키기 위해서는 제품 특성의 균일성을 확보함으로서 그 사용 실태에 대응해서 적절히 교환하는 것이 필요하다.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2002.11a
• /
• pp.201-204
• /
• 2002

심장박동간격은 최근 교감신경과 부교감신경의 안정을 알아보는 척도로 쓰이고 있다. 본 연구 목적은 심장박동변이 측정을 통하여 항균작용 및 원적외선 방사를 하는 특수기능성 직물이 인체의 자율신경계, 감성 및 심리적 변수에 미치는 효과를 알아보는 데에 있다. 총 10명의 피험자를 대상으로 하여 심장박동 간격을 조사하고 시각상사척도를 이용하여 우울, 불안, 피로 그리고 스트레스정도를 착용 전후에 각각 조사하였다. 그 결과 저주파수 적분값과 고주파수 적분값의 비가 착용 전에 비해 착용 후 통계적으로 유의한 차이가 나타났으며 (p<0.05) 우울, 불안, 피로, 스트레스의 값이 유의하게 감소하였다(p<0.05). 본 연구를 통하여 항균, 원적외선 방사를 하는 특수기능성 섬유가 감성이나 자율신경계에 영향을 준다는 것을 관찰할 수 있었다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.1
• /
• pp.78-85
• /
• 1986

This study has been made to investigate Behavior of the fatigue crack propagation for the purpose of taking into consideration the fatigue behavior Which initiate and propagate in tip of defect of the defected specimens, Which Contain the micro-hole or micro-slit. Especially, the specimens have been conducted with high-freguency heat treatment of 850.deg. C, 1050.deg. C to consider strength elevation of defected specimens. The results of this study are as follow; (1) The case of the same in the length of crack, the fatigue crack propagation rate of the micro-slit is always faster than that of micre-hole. But, the first step of the fatigue crack propagation it is not always so. (2) Fatigue crack propagation rate of specimens with micro-slit or micro-hole which have been treated with high-frequency heat treatment satisfy the following formula between the fatigue crack propagation rate and nominal stress; dl/dN .var..sigma.$^{m}$ *l$^{n}$ .

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.24 no.11
• /
• pp.840-845
• /
• 2014

Vibration profiles consist of two kinds of pattern, random and harmonic, at general engineering problems and the detailed vibration test mode of a target system is decided by the spectral condition that is exposed under operation. In moving mobility, random responses come generally from road source; whereas the harmonic responses are triggered from rotating machinery parts, such as combustion engine or drive shaft. Different spectral input may accumulate different damage in frequency domain since the accumulated fatigue damage dependent on the pattern of input spectrum in high cyclic loading condition. To evaluate the sensitivity of spectral damage according to different loading conditions, a linear elastic system is introduced to conduct a uniaxial vibration testing. Measured data, acceleration and strain, is analyzed using energy isocline function and then, the calculated fatigue damage is compared by different loading cases, random and harmonic.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.1
• /
• pp.134-142
• /
• 1998

The effects of small hole defect size and effective case depth(ECD) on the four point bending fatigue limit of induction surface hardened S45C steel were investigated the fatigue limit evaluation of hardened materials is very difficult because of relations of the hardness gradient and residual stress. In this study, it was possible to characterize fatigue limit and fatigue life of induction surface hardened S45C steel in terms of the hole defect size and effective case depth(ECD) and quantitative evaluation of the fatigue limit with hole defects use Murakami's evaluation method and the range of evaluated values is a good accuracy compared with results.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.3
• /
• pp.28-38
• /
• 2003

Finite element analysis of cylinder heat/block compound under assembly, thermal and firing condition were performed. FE model including two cylinders with gasket, head bolts, liners and valve seats was used. FE modeling method and boundary conditions were introduced. Stress distribution and deformation of cylinder head and block under each loading condition were presented. Gasket pressure distribution and bore distortion level were predicted. Measured data of bore distortion was compared with the analysis results. The analysis result showed similar trends with the experimental data. High cycle fatigue analysis on the basis of this result has been performed in order to find the critical areas of the engine assembly.

• Physical Therapy Korea
• /
• v.10 no.4
• /
• pp.23-31
• /
• 2003

본 연구는 상지운동 동안에 복부에 적용된 압력이 요부와 복부의 근피로도에 미치는 영향을 알아보았다. 연구대상자는 성인 남자 5명이었다. 연구대상자가 10 repetitions maximun (RM) 무게의 아령을 이용하여 1분 동안 상지운동을 수행 시 0 mmHg, 저압(30 mmHg), 중압(70 mmHg), 고압(100 mmHg)의 외부 압력이 복부에 적용되었고, 복직근, 외복사근, 내복사근, 척추기립근에서 근전도 자료가 수집되었다. 주파수 분석을 통하여 적용된 압력에 따라 각각의 근육에서 초기 10초 구간과 말기 10초 구간의 중앙주파수로 피로지수를 측정하였다. 통계학적 분석방법은 반복측정된 이요인 분산분석 ($4{\times}4$)과 사후검정을 이용하였다. 그 결과 압력의 차이에 의한 주효과가 나타났으며, 사후검정결과 0 mmHg 압력에 비해 30 mmHg, 100 mmHg에서 각각 피로지수가 유의하게 낮았다(p=.04, p=.015). 본 연구의 결과를 통하여 복부에 적용된 압력 (30 mmHg, 100 mmHg)이 근육의 피로도를 감소시킬 수 있음이 나타났다. 요부벨트를 이용하여 작업을 수행할 때, 고유수용성 감각 입력을 증가시키고 재손상을 방지하는 목적이외에도 근피로도를 감소시킬 수 있다는 가능성을 알 수 있었다.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.14 no.5
• /
• pp.394-402
• /
• 2021

The entry of an aging society and the extension of human life expectancy, the increasing interest in women's social advancement and men's appearance, and the natural interest in K-culture through media media, while receiving worldwide attention, Focus on K-Bueaty. Recently, looking at the occupation of the medical tourism field, in the case of aesthetic medicine tourism such as molding and dermatology, it has gained popularity not only in Asia such as China and Japan, but also in North America and Europe. The first external confirmation of human aging is the wrinkles on the skin of the face. Clean, wrinkle-free, elastic and healthy skin is a desire of most people. Skin condition and condition such as focused ultrasonic stimulation (HIFU: High Intensity Focused Utrasound) and low frequency, high frequency (RF: Radio Frequency), galvanic therapy using microcurrent, cryotherapy using rapid cooling, etc. Depending on the method of management, the effect of the treatment differs depending on the output and the stimulation site, etc., even in the treatment of medical equipment and beauty equipment using the same mechanism. In this research, in order to develop invasive high-frequency dermatological devices using a large number of beauty medical devices and microneedles of beauty devices, the international standards IEC 60601-2 (standards for individual medical devices) and MFDS (Ministry of) We designed and developed a high-frequency output device in compliance with the high-frequency stimulation standard announced in the Food and Drug Safety (Ministry of Food and Drug Safety). The circuit design consists of an amplifier (AMP: Amplifier) using Class-A Topology and a power supply device using Half-Bridge Topology. As a result of measuring the developed high-frequency output device, an average efficiency of 63.86% was obtained, and the maximum output was measured at 116.7W and 50.67dBm.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2009.01a
• /
• pp.215-218
• /
• 2009

본 논문에서는 웨이블릿 변환 된 고주파 서브밴드들의 에지 정보를 이용하여 관심 객체 영역을 고속으로 자동 검출해주는 새로운 알고리즘을 제안하였다. 제안된 방법에서는 에지정보를 이용하여 블록단위의 4-방향 객체 윤곽 탐색 알고리즘(4-DOBS)을 수행하여 관심객체를 검출한다. 전체 이미지는 $64{\times}64$ 또는 $32{\times}32$ 크기의 코드 블록으로 먼저 나누어지고, 각 코드 블록 내에 에지들이 있는지 없는지에 따라 관심 코드블록 또는 배경이 된다. 4-방향은 바깥쪽에서 이미지의 중앙으로 탐색하여 접근하며, 피사계 심도가 낮은 이미지는 중앙으로 갈수록 에지가 발견된다는 특징을 이용한다. 기존 방법들의 문제점 이였던 복잡한 필터링 과정과 영역병합 문제로 인한 높은 계산도를 상당히 개선시킬 수 있었다. 또한 블록 단위의 처리로 인하여 실시간 처리를 요하는 응용에서도 적용 가능 하였다.

• Journal of Ocean Engineering and Technology
• /
• v.5 no.1
• /
• pp.71-80
• /
• 1991

This paper reveals the effect of the effective case depth(ECD) on the fatigue behavior of a high-frequency induction hardened SM45C in rotated bending fatigue test. In addition, the effects of fracture modes(surface origin type, inner origin type) on it are discussed. The fatigue limit of the induction hardened steel is remarkably increased compared with that of base metal. In addition, the fatigue limit is linearly increased as the effective casedepth grows deep in the region of this experiment (ECD/R;0.23-0.49). The S-N curve and fracture mode in the induction case hardened steel are classified into two kinds, as a result : N$_{f}$<10$^{5}$ ;surface origin type fracture(at high stress), N$_{f}$>10$^{5}$ ; in ner origin type fracture(at low stress). In case of inner origin type fracture; as the effective case depth(ECD) gets deep, the fatigue limit is increased by the reason that the fracture origin moves toward center; in reverse, is decreased by reason that the compressive residual stress gets low. As a result, the increasing effect of the former is much bigger than the decreasing effect of the latter, and the fatigue limit is increased as the ECD gets deep.eep.