• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• 제7권1호
• /
• pp.83-91
• /
• 1996

The SPICE circuit analysis program has a limited math capability and, in general, cannot be used for RF and microwave simulation because a complex arithmetic is required to compute S-parameters from node voltages. This paper presents two test bench models that can be used to obtain node voltages proportional to incident, reflected, and transmitted signals. From SPICE computed node voltages, S-parameters are computed using the math capability of the PSPICE post processor, PROBE, as an example for a low-pass filter consisting of transmission line sections. The results of this example are compared with another high frequency circuit analysis program, TOUCHSTONE. The difference between the results of these two programs in magnitude was less than 0.003 and in phase was a few tenths of a degree. By using these test benchs to simulate a filter, RF and microwave analysis can be made with the SPICE, which can be a cost-effective and readily available computational tool for educators and practicing engineers.

• Journal of IKEEE
• /
• 제27권4호
• /
• pp.472-476
• /
• 2023

Fundamental frequency/pitch period are major characteristics of speech signals. They are used in many speech applications like speech coding, speech recognition, speaker identification, and so on. In this paper, some of inflection points are used to estimate the pitch which is the inverse of the fundamental frequency. The inflection points are defined as points where local maxima, local minima or the slope changes occur. The speech signal is preprocessed to remove unnecessary inflection points due to the high frequency components using a low pass filter. Only the inflection points from local maxima are used to get the pitch period. While the existing pitch estimation methods process speech signals in blockwise, the proposed method detects the inflection points in sample and produces the pitch period/fundamental frequency estimates along the time. Computer simulation shows the usefulness of the proposed method as a fundamental frequency estimator.

• The KIPS Transactions:PartB
• /
• 제18B권3호
• /
• pp.147-156
• /
• 2011

This paper proposes a 3-stage (preprocessing, feature extraction, and classification) fault detection and classification algorithm for induction motors. In the first stage, a low-pass filter is used to remove noise components in the fault signal. In the second stage, a discrete cosine transform (DCT) and a statistical method are used to extract features of the fault signal. Finally, a back propagation neural network (BPNN) method is applied to classify the fault signal. To evaluate the performance of the proposed algorithm, we used one second long normal/abnormal vibration signals of an induction motor sampled at 8kHz. Experimental results showed that the proposed algorithm achieves about 100% accuracy in fault classification, and it provides 50% improved accuracy when compared to the existing fault detection algorithm using a cross-covariance method. In a real-world data acquisition environment, unnecessary noise components are usually included to the real signal. Thus, we conducted an additional simulation to evaluate how well the proposed algorithm classifies the fault signals in a circumstance where a white Gaussian noise is inserted into the fault signals. The simulation results showed that the proposed algorithm achieves over 98% accuracy in fault classification. Moreover, we developed a testbed system including a TI's DSP (digital signal processor) to implement and verify the functionality of the proposed algorithm.

• Journal of Advanced Navigation Technology
• /
• 제6권3호
• /
• pp.188-194
• /
• 2002

DBS is utilized as very useful media in information-oriented society because it covers wide service area and provide high quality services. But DBS needs skill that can receive DBS signal at move. In this paper, it is considered a development of a device to receive DBS and design of a low noise downconverter that use tracking antenna to receive DBS at mobiles unit and ships which navigate in Korea peninsula coast. The structure of dual phase LNB is composed of LNA, BPF, oscillator, mixer, and IF amplifier. And for the position tracking, two input-output phase performed in phase. Measured results showed good performance that with respect to input signal 11.7 GHz~12.2 GHz, noise figure is 0.87 dBmax and conversion gain 62 dB, temperature characterization ${\pm}400$ kHz in respect to - 30 to $60^{\circ}C$, and phase noise -101 dBc/Hz in respect to offset 100 kHz.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• 제36C권5호
• /
• pp.27-37
• /
• 1999

A CMOS ReadOut Integrated Circuit (ROlC) for InfraRed Focal Plane Array (IRFPA) detector is presented, which is a key component in uncooled thermal imaging systems. The ROIC reads out signals from $64\times64$ Barium Strontium Titanate (BST) infrared detector array, then outputs pixel signals sequentially after amplifying and noise filtering. Various design requirements and constraints have been considered including impedance matching, low noise, low power dissipation and small detector pitch. For impedance matching between detector and pre~amplifier, a new circuit based on MOS diode structure is devised, which can be easily implemented using standard CMOS process. Also, tunable low pass filter with single~pole is used to suppress high frequency noise. In additions, a clamping circuit is adopted to enhance the signal~to-noise ratio of the readout output signals. The $64\times64$ IRFPA ROIC is designed using $0.65-\mu\textrm{m}$ 2P3M (double poly, tripple metal) N~Well CMOS process. The core part of the chip contains 62,000 devices including transistors, capacitors and resistors on an area of about $6.3-mm\times6.7-mm$.

• Journal of the Institute of Electronics and Information Engineers
• /
• 제50권9호
• /
• pp.201-208
• /
• 2013

In this paper, we studied on improvement for radiated EMI of USB power line of cable. it is made by using wireless video access point system for confirming the phenomenon of radiated EMI from cable. then, we make sure that the limit exceed through the initial measurement of radiated EMI limit criteria in comparison to about 3 [dBuV/m]~15 [dBuV/m]. after that we confirmed the resonance in power line of cable through measurement of s-parameters. so, we confirmed the relation radiated EMI and power line of cable resonance and we reduced radiated EMI in power line of cable through a capacitor and low pass-band filter using the technique of power networks management. in conclusion, we suggested how to reduce power line of cable resonance applied for the improved method. and we confirmed that suggested reduction method is suitable through testing radiated EMI. the result of radiated EMI reduction limit criteria 40[dBuV/m]~47[dBuV/m] in comparison to about 3 [dBuV/m]~20 [dBuV/m].