• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.8
• /
• pp.1767-1775
• /
• 2003

The SAW device is extensively used as a electro$.$mechanical band­pass filter in which a two­pairs of interdigital transducers are provided over the surface of the piezoelectric substrate. For the design requirement, the central frequency and the bandwidth of the passband, and the attenuation level of the stopband region are specified. The configuration is made so as to satisfy the specification given. The central frequency is mainly determined by the distance between the pair of the finger electrodes. The design is considered as an optimization problem with which the error norm, the distance between the desired characteristics and the calculated for a given model is to be minimized. The delta function model and the electrical equivalent circuit model are utilized to represent the SAW filter characteristics. Genetic algorithm is used for optimization in which apodization of the transducer fingers is chosen as a design variable.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2018.06a
• /
• pp.198-199
• /
• 2018

본 논문은 초해상도 기술을 위한 CNN 구조를 제안한다. 제안하는 Gradient-SR 은 고해상도 영상이 고주파 신호와 저주파 신호로 분리될 수 있다는 점을 바탕으로 고역 통과 필터인 Sobel Operator 를 CNN 기반으로 구성한다. Gradient-SR 로부터 생성된 고주파 신호는 목표 크기로 보간 된 저해상도 입력 영상과 더해짐으로 고해상도 영상을 생성한다. 실험 영상은 VDSR 이 사용 한 291 개의 영상과 B100 영상을 이용한다. 제안하는 방법은 스케일 팩터 2 에 대한 초해상도 영상 생성 실험에서 약 200%의 속도 향상을 보인다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.11 s.114
• /
• pp.1089-1095
• /
• 2006

In this paper, the circuit analysis of three-dimensional bandpass filter with transmission zero in multi-layer printed circuit board is presented. The equivalent circuit of bandpass filter is evaluated by microwave network analysis. Compare to the established paper that have configured the circuit model of filter except the effect of distribute element, the proposed model can include the effect. As a result, the multi-layer PCB bandpass filter with transmission zero has designed by extracting mutual capacitance from electrical component inside inductor. The structure size is only $10mm{\times}20mm{\times}1.251mm$. Measured data of the bandpass filter indicate 1.9 dB of insertion loss and 28 dB of return loss at the center frequency of 1.84 GHz, as well as 43 dB attenuation at the refraction frequency of 2.78 GHz.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.2
• /
• pp.200-207
• /
• 2009

This paper presents a compact, low insertion loss, sharp rejection and wide band microstrip band pass filter that is composed rectangular loop resonator and Step-Impedance-Open-Stub(SIOS). The SIOS can be reduce length about 30 % more than general 0.25 $\lambda$ open stub. And the stub can the advantage of tuning impedance magnitude. In order to demonstrate agrement of this paper prove, the optimized wide band pass filters are realized and experimented. A transmission line model used to calculate the frequency response of the new filters shows good agreement with measurements. The filter has 3 dB fractional bandwidth of 51.75 %(3.206 GHz), an insertion loss of better than 0.44 dB from 4.587 GHz to 7.793 GHz, and two rejection of greater than 30 dB within 221 MHz($4.326{\sim}4.587\;GHz$) at low frequency band, 181 MHz($7.739{\sim}7.954\;GHz$) at high frequency band. Maximum rejection characteristics of the filter are -61.8 dB at low frequency and -76.3 dB at high frequency.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.6
• /
• pp.900-909
• /
• 1999

The receiving part of the RF system for the digital TRS base stations is developed in this paper. Based on the system specifications, the structure of the RF system is accomplished and its block diagram is drawn. The RF system is implemented according to these block diagrams. Subsequently the RF band-pass filter, the low noise amplifier, the automatic level controlled attenuator, the frequency synthesizer and other components for the system are designed and implemented, and a main board to integrate these modules is also manufactured. To lower the noise floor of the system and suppress the RF spurious noise, a PCB layout is performed carefully. For each module consisting of the RF system and the entire system, the performance tests are accomplished to check the specifications.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2006.06a
• /
• pp.37-40
• /
• 2006

FM(Frequency Modulation) 음 합성방식은 오랫동안 연구되어 왔고 여러 가지 효과를 주기에 유용하고 비교적 낮은 사양으로 높은 수준의 배음을 합성할 수 있지만 그 응용분야가 대부분이 서양악기 위주의 연구였다. 이에 본 논문에서는 국악 관악기인 피리를 주파수 영역에서 저주파 영역과 고주파 영역으로 나누어 분석하고 이 결과를 이용하여 FM 파라미터를 추출하고 비대칭 FM합성방식으로 1차적인 소리를 합성하였다. 분석된 저주파 영역과 고주파 영역의 특성을 각각의 역 필터링을 위한 2개의 필터를 설계하여 이를 다시 합성된 소리를 통과시켜 두 소리를 합산함으로써 더욱 원음과 유사한 소리를 합성할 수 있었다.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1411-1412
• /
• 2015

본 연구에서는 맥박 측정에서 생기는 잡음들 중 많은 오류를 생기게 하는 동잡음 개선을 위하여 회로를 제안하고 설계하였다. 기존의 맥박추정 장비에서 가변저항, 광원 스위칭, 디지털 필터를 사용함으로써 정확도 향상을 위한 연구를 하였다. 손가락에서 광전용적맥파를 측정시 측정부의 광원을 2개를 사용하고, 이를 스위칭을 통해 파형을 측정을 하였다. 실험에서 PPG의 측정은 반사형 방식을 사용하고 이를 광원스위칭을 통해 신호를 받아들였다. 이를 저주파통과필터와 고주파통과필터를 사용하여 0.5~5Hz대역을 필터링 함으로써 PPG이외의 잡음을 제거하고 신호를 검출하였다. 검출된 파형을 지수가중이중필터로 필터링을 함으로써 정확성을 높였다. 이를 통하여 광원스위칭을 통한 PPG의 출력과 발광다이오드 한 개를 사용한 출력을 비교 분석을 보여줄 것이다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.3
• /
• pp.138-144
• /
• 2017

In this paper, we propose a high frequency boosting circuits compensating for age-related hearing loss. The frequency response of this hearing loss is quite similar to that of a low-pass filter of which the critical frequency get lower with age. Therefore the voltage gain of this compensation circuits increase proportionally to the frequency of signals when the frequency is higher than the critical frequency and the voltage is constant irrespective of the frequency of signals when the frequency is lower than the critical frequency. The proposed circuits consist of a differential circuit and a unity gain amplifier. Because the critical frequency of the proposed circuits is controlled simply in the shape of a volume control lever, the aged people can adjust the high frequency boosting level easily according to one's hearing loss level. The critical frequency is continuously controllable in the whole audible frequency band and the gain of this high frequency boosting circuits is above 80dB at 10kHz.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.4
• /
• pp.636-644
• /
• 2009

This paper presents a compact, low insertion loss, sharp rejection and wide band microstrip band pass filter that is composed rectangular loop resonator and step-impedance-open-stub(SIOS) for wireless data communication. The SIOS can be reduce length about 30% more than general $0.25{\lambda}$ stub. And the stub can the advantage of tuning impedance magnitude. In order to demonstrate agrement of this paper prove, the optimized wide band pass filters are realized and experimented. A transmission line model used to calculate the frequency response of the new filters shows good agreement with measurements. The filter has 3dB fractional bandwith of 52.5%(3.267GHz), an insertion loss of better than 0.33dB from 4.587GHz to 7.854GHz, and two rejection of greater than 30dB within 221MHz$(4.366GHz{\sim}4.587GHz)$ at low frequency band, 181MHz$(7.854GHz{\sim}8.035GHz)$ at high frequency band. Maximum rejection characteristics of the filter are -54dB at low frequency and -60dB at high frequency.

• Journal of Broadcast Engineering
• /
• v.16 no.5
• /
• pp.883-893
• /
• 2011

In this paper, we propose a novel focus measure that determines in-focus and out-of-focus region in an image. In addition, we achieved extended depth of field by blending the acquired image and Wiener filtered image using a decision map based on the designed focus measure. Since conventional focus measures are based on the amount of high frequency components in an acquired image, the measures may not be accurate if there exist high frequency components in out-of-focused region. To overcome the problem, we designed the novel focus measure based on effective band pass filtering. In simulations and experiments, the proposed method showed better performance than existing methods.