• ICROS
• /
• v.17 no.1
• /
• pp.31-38
• /
• 2011

주파수 영역에서 제어기를 설계하기 위해서는 시스템의 대역폭, 초대 주파수 응답, 저주파에서의 이득, 고주파에서의 이득 감쇄 정도를 고려한다. 또한 나이퀴스트 선도, 보우드 선도 등을 활용하여 폐루프 제어 시스템의 이득여유, 위상 여유를 확보할 수 있도록 한다. 일반적으로 저주파 영역에서는 개루프의 이득이 기준치보다 크도록 하고, 고주파수 영역에서는 기준치보다 작도록 설계를 하며, 폐루프 응답에서 대역폭이 유지되고, 공진피크점의 응답 크기는 1에 비하여 과도하게 크지 않도록 설계를 한다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.5
• /
• pp.481-487
• /
• 2005

Proposed induction-heated system is innovative system which applied special high-frequency power circuit technique for thermal converse technique and IH(Induction-Heating) magnetic induction heating generated from induction-heated metallic package that is for distillation unit. In this occurs not burning, so that the working environment can be improved. This electromagnetic induction heating technique is used high frequency inverter, By using high frequency inverter high frequency alternative current in the range of [kHz] can be made with conventional alternative current. In this contribution IGBT module is used for high frequency inverter. This paper proposes new fluid heating method. Which is operated as follows. Working coil, which is wrapped outside of pipeline, makes the eddy current. Inside of heating vessel in isolated pipeline the specially designed stainless metallic package is inserted, which can be heated by eddy current losses. And then In this paper are discussed action analysis and characteristics analysis of 5[kW] class full-bridge resonant inverter system and resonant metallic package. In addition, by using this system, how high-efficiency heater is developed and application of system are also discussed.

• The Journal of the Acoustical Society of Korea
• /
• v.29 no.5
• /
• pp.314-324
• /
• 2010

In waveguide structures, waves may be partially reflected by local non-uniformities. The effects of local non-uniformities has been previously investigated by means of a combined spectral element and finite element (SE/FE) method at relatively low frequencies. However, since the SE is formulated based on a beam theory, the SE/FE method is not appropriated for analysis at higher frequencies where complex deformation of the waveguide occurs. So it is necessary to extend this approach for high frequencies. For the wave propagation at higher frequencies, a combined spectral super element and finite element (SSE/FE) method is introduced in this paper. As an example of the application of this method, wave reflection and transmission due to a local defect in a rail are simulated at frequencies between 20kHz and 30kHz. Also numerical errors are evaluated by means of the conservation of the incident power.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.2
• /
• pp.102-109
• /
• 2000

This paper describes two different theories used to model the scattering of ultrasound by a volumetric flaw and a crack-like flaw. The elastodynamic Kirchhoff approximation (EKA) and the geometrical theory of diffraction (GTD) are applied respectively to a cylindrical cavity and a semi-infinite crack. These methods are known as high frequency approximations. The 2-D elastodynamic scattering problems of a plane wave incident on these model defects are considered and the scattered fields are expressed in terms of the reflection and diffraction coefficients. The ratio of the scattered far field amplitude to the incident wave amplitude is computed as a function of the angular location and compared with the boundary element solutions.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.2
• /
• pp.309-314
• /
• 2002

New grid connected PV(Photovoltaic) system of high-frequency link with soft-switching is proposed to solve problems related to the loss of transformer and switch. The operation of Proposed system using the soft switching that consists of high frequency transformer is confirmed by computer simulation and experiment. It can improve its efficiency and solve the Problems mentioned above.

• The Journal of Natural Sciences
• /
• v.13 no.1
• /
• pp.15-23
• /
• 2003

본 연구에서는 코일의 온도를 액체질소 온도 정도의 저온으로 냉각시켜 핵자기공명 신호 및 영상의 신호대잡음비를 향상시키는데 그 목적을 두었다. 핵자기공명 신호의 신호대잡음비에 대한 이론적인 분석을 토대로 다양한 형태의 고주파코일을 제작했고, 저온의 표면고주파코일로 획득된 신호를 상온의 일반 구리코일로 획득된 신호와 비교하였다. 본 연구에서 제작된 저온코일의 경우, 상온코일에 비해서 신호대잡음비의 향상을 얻을 수 있었다. 이러한 신호대잡음비의 향상을 통하여 핵자기공명영상 시간을 단축할 수 있으며, 이를 통한 진단의 신뢰도 향상에 기여할 수 있을 것으로 사료된다.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.96-97
• /
• 2017

본 논문은 Gallium Nitride-Field Effect Transistor(GaN-FET)를 적용한 고방열 및 고전력밀도 모듈형 벅 컨버터를 제안한다. Si-MOSFET를 적용한 벅 컨버터는 높은 스위칭 손실로 인해 고주파수 구동 및 자기소자 사이즈 저감에 한계가 존재하여 고전력밀도화가 어렵다. 반면, 제안된 방식은 스위칭 특성이 우수한 GaN-FET를 적용하여 고주파수 구동이 가능하며, 추가로 평면형 인덕터를 적용함으로써 자기소자의 부피 저감을 통해 컨버터의 고전력밀도화 및 모듈화가 가능하다. 특히, 방열 플레이트 및 케이스로 구성된 새로운 고방열 구조를 통해 방열효과를 극대화 시킬 수 있다. 제안된 모듈형 벅 컨버터의 타당성 검증을 위해 입력전압 48V, 출력전압 24V의 300W급 시작품 제작을 통한 실험결과를 제시한다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.347-347
• /
• 2011

고주파수평행평판플라즈마소스에서 전기장분포를 맥스웰방정식을 적용하여 해석하였다. 크게 두가지 요인이 전기장분포를 결정하였는데, 변위전류가 우세한 경우는 중심에 전기장이 큰 모양의 분포가 되었고, 전도전류가 주된 경우는 바깥쪽에 전기장이 센 모양을 가졌다. 본 계산에 의하면 전기장분포를 결정하는 또 다른 하나의 요인은 충돌주파수였는데, 충돌주파수에 의해서 전기장분포가 변화되는 것을 확인하였고, 전기장분포를 변화시킬 수 있는 충돌주파수조 건도 본 논문에서 제시할 예정이다.

• KIPS Transactions on Computer and Communication Systems
• /
• v.4 no.9
• /
• pp.321-326
• /
• 2015

In this paper, we proposed an algorithm which could transmit reliable data between smart devices by using inaudible high frequency of audible frequency range and cyclic redundancy check method. The proposed method uses 18 kHz~22 kHz as high frequency which inner speaker of smart device can make a sound in audible frequency range (20 Hz~22 kHz). To increase transmission quantity of data, we send mixed various frequencies at high frequency range 1 (18.0 kHz~21.2 kHz). At the same time, to increase accuracy of transmission data, we send some mixed frequencies at high frequency range 2 (21.2 kHz~22.0 kHz) as checksum. We did experiments about data transmission between smart devices by using the proposed method to confirm data transmission speed and accuracy of the proposed method. From the experiments, we showed that the proposed method could transmit 32 bits data in 235 ms, the transmission success rate was 99.47%, and error detection by using cyclic redundancy check was 0.53%. Therefore, the proposed method will be a useful for wireless transmission technology between smart devices.

• Journal of Broadcast Engineering
• /
• v.6 no.1
• /
• pp.108-118
• /
• 2001

In this paper, the conventional deblocing algorithms are compared in each region of the image. Based on the comparison result, we propose a new deblocklng algorithm that can improve subjectives as well as the objective quality. Because the human visual system is mode sensitive to the blocking artifacts in the low frequency re91on, we compare the performance of several deblocking algorithms in 7he low and high frequency region separately. For this purpose we also propose an algorithm for classifying the region into low and high frequency ones. and propose a deblocking algorithm which is applied differently to each region. The result shows that the adaptive LPF method yields the best performance in the low frequency region in terms of both subjective and objective quality. Hence. by applying the adaptive LPF method to the low frequency region, the performance of conventional algorithms can be improved. In the high frequency region. it is observed that the DCT-based POCS algorithm provides the best performance. Hence, by combining the algorithm with the adaptive LPF method, the best objective performance is obtained.