• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.89-89
• /
• 2009

In this study, the structural characteristics and the electrical properties of $Ag(Ta,Nb)O_3$ ceramics were investigated. Compound ceramics were fabricated by the mixed oxide method. The sintering temperature was 1200 $^{\circ}C$. The dielectric properties of $Ag(Ta,Nb)O_3$ ceramics were measured from 1 kHZ to 1 MHz. The electrical properties of $Ag(Ta,Nb)O_3$ ceramics were investigated at the various temperature ranges.

• 동아시아식생활학회지
• /
• 제1권2호
• /
• pp.151-173
• /
• 1991

A review of the royal banquet rituals which were excuted twice a day for consecutive three days for master were found to be progressed; 1st day for Queen Mother, 2nd day for King, 3rd day for Crown Prince very orderly. And performing dozens of dances and musics at each intervals of this procedure. The Sequence of rituals were summarized as follows. 1. Entering by order of low in rance. 2. Opening a ceremony. 3. Setting napkins, spoons and chopsticks and sumptuous table for master. 4. Offering flowers to master and then granting that flowers to subjects 5. Singing a open song. 6. Setting wine/side dishes for master and complimenting master's achievement/wellness. 7. Bowing politely three times and giving cheers. 8. Distributing wine/dishes to high ranked subjects. 9. Offering special dishes for master. 10. Distributing wine to low ranked subjects. 11. Singing a closing song. 12. Taking away tables. 13. Closing a banquet and leaving the hall.

• E2M - 전기 전자와 첨단 소재
• /
• 제2권1호
• /
• pp.33-40
• /
• 1989

낮은 에너지(60KeV) 비소 이온주입으로 고종도의 얇은 표면층을 형성시켜 Pt-nSi 쇼트키 다이오드의 유효 장벽높이를 감소시켰다. 역방향 특성을 크게 저하시키지 않고 순방향 임계전압을 400mV에서 200mV로 낮추는데 필요한 이온주입량은 얇은 산화막(215.angs.)이 존재하는 상태에서 비소 이온주입을 한 경우는 9.0*$10^{12}$$cm^{-2}$이고, 산화막이 없는 상태에서 이온주입한 경우는 5.1*$10^{12}$$cm^{-2}$이었다. 이온주입후 열처리 조건은 900.deg.C에서 30분간 N$_{2}$분위기에서 행하였으며 얇은 산화막을 통한 이온주입으로 다이오드의 역방향 특성을 개선하였다.

• 대한기계학회논문집A
• /
• 제31권12호
• /
• pp.1194-1199
• /
• 2007

A unique fabrication method for a copper micromesh is proposed and demonstrated. A PDMS mold was fabricated using a microcasting process and then used as a flexible mold in copper electroplating. The fabricated copper micromesh was well formed and connected without any cracks within the entire mold area. The experimental results verified that the fabricated features of the copper micromesh accurately followed the shape of the microstructures of the PDMS mold. This unique fabrication method provides an easy yet precise means of producing three-dimensional metal microstructures.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.250-252
• /
• 1996

In this paper, the principle of operation. the part characteristic, characteristic of component movement, analysis are carried out for camcoder iris assembly which is one of the important element component in Video large projection TV instrument, and some Know-how for development of element component is also included. The magnetic field circuit for the small and simple structure with low power consumption is introduced and new materials of yoke for small motor system is suggested. Especially, the relation with remained magnetic field and operation duration time is analyzed by experimental results. Some problems of nonlinear torque characteristics include to obtain the simple and low cost structure in domestic production of element component is analyzed. Furthermore, development procedure is suggested for iris assembly and some methods to reduce the burr with some check points for small precise accessories are explained.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2001년도 추계학술발표대회
• /
• pp.382-385
• /
• 2001

The effect of agitation speed on the production of mycelial growth and exo-biopolymer in bioreaetor culture was investigated. The maximum production of mycelia and exo-biopolymer was obtained at 350 rpm, where the maximum concentrations of mycelial growth and exo-biopolymer were 62 g/L and 23 g/L, respectively. The effect of agitation speed on the hyphal length and the number of tips was examined. The hyphal length and the number of tips of Cordyceps sinensis 16 in bioreaetor culture at 350 rpm were increased up to 660 ${\mu}m$ and 14/ml, respectively.

• 전력전자학회논문지
• /
• 제11권1호
• /
• pp.38-45
• /
• 2006

본 논문은 유도기의 정밀위치제어를 얻고자 외란 변화에 대하여 정밀위치 제어를 할 수 있는 외란 관측기를 적용하였다. 제안된 알고리즘은 외란 변화에 대한 유도전동기의 정밀 제어에 강인함을 보이고 있다. 모든 게인의 튜닝은 디지털 제어 이론에 입각하여 이산 영역에서 구하였다. 또 시뮬레이션은 시뮬링크를 사용하여 그 구성을 매우 간편하게 하였다. DS1102 보드를 이용한 유도기 정밀위치 제어 결과는 제안된 시스템의 유용성을 보인다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1997년도 전력전자학술대회 논문집
• /
• pp.97-100
• /
• 1997

A new control method for the robust position control of a brushless DC(BLDC) motor using the asymptotically stable adaptive load torque observer is presented. A precision position control is obtained for the BLDC motor system approximately linearized using the field-orientation method. And the application of the load torque observer is published in [1] using fixed gain. However, the flux linkage is not exactly known for a load torque observer. Therefore, a model reference adaptive observer is considered to overcome the problem of the unknown parameter in this paper. And stability analysis is carried out using Liapunov stability theorem. As a result, asymptotically stable observer gain can be obtained without affecting the overall system response. The load disturbance detected by the asymptotically stable adaptive observer is compensated by feedforwarding the equivalent current having the fast response.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(1)
• /
• pp.393-397
• /
• 2003

This paper presents neural load torque observer tha used to deadbeat load torque observer and regulation of the compensation gun by parameter estimator. As a result, the response of PMSM follows that of the nominal plant. The load torque compensation method is compose of a neural deadbeat observer. To reduce of the noise effect, the post-filter, which is implemented by MA process, is adopted. The parameter compensator with RLSM (recursive least square method) parameter estimator is adopted to increase the performance of the load torque observer and main controller. The parameter estimator li combined with a high performance neural torque observer to resolve the problems. As a result, the proposed control system becomes a robust and precise system against the load torque and the parameter variation. A stability and usefulness, through the verified computer simulation, are shown in this paper

• 한국정보과학회 언어공학연구회:학술대회논문집(한글 및 한국어 정보처리)
• /
• 한국정보과학회언어공학연구회 1995년도 제7회 한글 및 한국어 정보처리 학술대회
• /
• pp.112-116
• /
• 1995

본 논문에서는 한-일 대화체 기계번역 시스템을 위한 대화체 모델을 제시한다. 이 대화체 모델에서는 구문분석과 의미분석을 거치지 않고 형태소 분석만을 이용하여 대화체 모델을 구현하였다. 대화체모델은 담화문으로부터 목표를 추출하는 GOAL DETECTOR, 추출된 목표에 맞는 플랜을 제시하는 PROPOSER, 제시된 플랜의 적합성 여부를 결정하는 PROJECTOR, 플랜의 실행 후 결과를 시스템의 환경에 반영하는 EXECUTOR 및 영역에 대한 지식을 표현하는 영역지식(Domain Knowledge)으로 구성이 된다.