• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.6
• /
• pp.147-154
• /
• 2004

In this paper, Inverted Coordinates Image Space (ICIS) is proposed as a solution for the problem of the unbounded accumulator space in the automatic detection of the finite/infinite vanishing points in image space. Since the ICIS is based on the direct transformation from the image space, it does not lose any geometrical information from the original image and it does not require camera calibration as opposed to the Gaussian sphere based methods. Moreover, the proposed method can accurately detect both the finite and infinite vanishing points under a small fixed memory amount as opposed to the conventional image space based methods. Experiments are conducted on various real images in architectural environments to show the advantages of the proposed approach over conventional methods.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.12 no.4
• /
• pp.81-89
• /
• 1998

In the field of industrial drives, the vector control of the induction motor has been widely used to achieve the good control performance. In this paper, to require the information of rotor flux in direct vector control scheme, the flux observer by current model of rotor circuit is used. This flux observer is not only available at low-speed region bt good for the error reduction by feedback properties. Also, employing the flux observer on rotor reference frame, the robustness of decoupling control to the observation of rotor flux can be achieved. Through digital simulation and DSP-based IGBT inverter system, the validity for practical implementation is verified.

• Journal of the Society of Naval Architects of Korea
• /
• v.58 no.6
• /
• pp.348-357
• /
• 2021

In this paper, the generalized hydrodynamic force and response of a flexible body are calculated at different reference coordinate systems. We generalize the equation of motion for a flexible body by using the conservation of momentum (Mei et al., 2005). To obtain the equations in the generalized mode, two different reference coordinates are adopted. The first is the body-fixed coordinate system by a rigid body motion. The other is the inertial coordinate system which has been adopted for the analysis. Using the perturbation scheme in the weakly-nonlinear assumption, the equations of motion are expanded up to second-order quantities and several second-order forces are obtained. Numerical tests are conducted for the flexible barge model in head waves and the vertical bending is only considered in the hydroelastic responses. The results show that the linear response does not have the difference between the two formulations. On the other hand, second-order quantities have different values for which the rigid body motion is relatively large. However, the total summation of second-order quantities has not shown a large difference at each reference coordinate system.

• 전기의세계
• /
• v.20 no.5
• /
• pp.40-42
• /
• 1971

XY recorder는 10여년전부터 널리사용되어 오는 기록계로 2개의 자동평형전위차계로 X, Y축방향에 arm과 pen의 결합으로 양자의 좌표축의 교점에서 pen이 평형정지하는 상태에 기록지자체가 servo motor로 이동되어 기록이 가능하게 된다. 특히 타기록계에 비하여 고감도(Ex. 0.5V/cm), 고정도(Ex. 0.3%)임은 물론 y=f(x)인 x,y의 함수관계가 기록되어 타기록계에서는 얻기 어려운 특징이 있어, analog computer의 해의 기록계로서, 도한 각종 검출변환기를 전설치하여 vacuum tube 혹은 diode transistor의 특성곡선, 전기철판등의 자성재료의 자화곡선, 회전기의 회전수-전압, 전류, 출력, 효율곡선, 금속재료의 온도 혹은 인신장곡선, pipe valve의 유량-압력곡선등 전기.전지.기계.재료.물리.화학등의 다각도용도로서 연구실험은 물론 생산현장에 있어서의 시험. 정리. 감시등의 치용이 활발히 급진하는 경향에 비추어 이 기록계 사용에 고려되어야할 noise제거의 한 방법을 소개하고저 한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.3
• /
• pp.661-672
• /
• 2017

This paper introduces the NLSE(Nonlinear Least Squared Estimator) using curved LOBs(Line Of Bearings) considering the earth curvature based on sphere to avoid the map conversion distortion and minimize the estimation error. This paper suggests a method improving a performance of the NLSE using curved LOBs by using an ellipsoid model. The analysis of the simulation results shows that the NLSE using curved LOBs has better performance than the conventional triangulation method and can improve its performance using a suggested method.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.1
• /
• pp.10-18
• /
• 2009

A moving surface vessel generates a ship wake which contains a cloud of micro-bubbles with radii ranging between $8{\sim}200{\mu}m$. Such micro-bubbles can be detected by active sonar system for more than ten minutes depending on the size and speed of the surface vessel. In this paper, a reverberation model for the ship wake is presented. The developed model consists of the acoustic scattering model due to the distribution of the micro-bubbles and the kinematic model for the moving active sonar. The acoustic scattering model is based on the volume integration, where the volume scattering strengths are obtained from the spatial distribution of micro-bubbles. Since the directivity and look-direction of active sonar are important factors for moving active sonar, the kinematic model utilizes the Euler transformation to obtain the relative motion between the global and local coordinates. In order to verify the developed model, a series of sea experiment was executed in September 2007 to obtain the spatial-temporal distribution of a bubble cloud, and analyzed to be compared with the simulation results.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.531-532
• /
• 2016

본 논문에서는 스텝모터의 고성능 전류제어를 위한 모터의 고정자 저항 및 인덕턴스를 Off-Line추정하는 기법에 대해 기술한다. 모터의 고정자 저항 및 인덕턴스를 추정하기 위해 역기전력이 나타나지 않는 주파수영역에서 AC전압을 인가하고 이때의 전류를 측정한다. 또한, 가상 dq좌표계를 도입하여 정지좌표계상의 저역통과필터를 통해 위상지연 없이 전류신호에 포함된 노이즈를 제거하였으며, DC형태의 전류에 대한 분석을 통하여 정확한 모터의 제정수를 계량하는 기법을 적용하였다.

• Economic and Environmental Geology
• /
• v.37 no.4
• /
• pp.401-411
• /
• 2004

The Earth's total magnetic field was calculated from on board TAM(Three-Axis Magnetometer) observations of KOMPSAT-1 satellite between June 19th and 21st, 2000. The TAM's telemetry data were transformed from ECI(Earth-Centered Inertial Frame) to ECEF(Earth-Centered Earth-Fixed Frame) and then to spherical coordination. Self-induced field from the satellite bus were removed by the symmetric nature of the magnetic field. The 2-D wavenumber correlation filtering and quadrant-swapping method were applied to eliminate the dynamic components and track-line noise. To test the validity of the TAM's geomagnetic field, ${\phi}$rsted satellite's magnetic model and IGRF2000 model were used for statistical comparison. The correlation coefficients between KOMPSAT-1/${\phi}$rsted and KOMPSAT-1/IGRF2000 models are 0.97 and 0.96, respectively. The global spherical harmonic coeffi-cient was then calculated from the KOMPSAT-1 data degree and order of up to 19 and compared with those from IGRF2000, $\phi$rsted, and CHAMP models. The KOMPSAT-1 model was found to be stable to degree & order of up to 5 and it can give new information for the low frequency components of the global geomagtic field.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.1
• /
• pp.663-668
• /
• 2023

Recently it is very important to collect information such as enemy positions and facilities. To this end, unmanned aerial vehicles such as multicopters have been actively developed, and various mission equipment mounted on unmanned aerial vehicles have also been developed. The coordinate-oriented algorithm refers to an algorithm that calculates a gaze angle so that the mission equipment can fix the gaze at a desired coordinate or position. Flight data and GPS data were collected and simulated using Matlab for coordinate-oriented algorithms. In the simulation using only the coordinate data, the average Pan axis angle was about 0.42°, the Tilt axis was 0.003°~0.43°, and the relatively wide error was about 0.15° on average. As a result of converting this into the distance in the NE direction, the error distance in the N direction was about 2.23m on average, and the error distance in the E direction was about -1.22m on average. The simulation applying the actual flight data showed a result of about 19m@CEP. Therefore, we conducted a study on the self-error of coordinate-oriented algorithms in monitoring and information collection, which is the main task of EOTS, and confirmed that the quantitative target of 500m is satisfied with 30m@CEP, and showed that the desired coordinates can be directed.

• Proceedings of the KSRS Conference
• /
• 2007.03a
• /
• pp.105-108
• /
• 2007

차량에 부착된 회전식 레이저 스캐너는 360도로 회전하면서 데이터를 취득하기 때문에 고정식 레이저 스캐너에 비해 더 광범위하고 정확한 3차원 데이터를 획득하고 생성할 수 있다. 그러나 레이저 데이터 자료는 표적까지의 거리와 취득 당시의 스캐너의 각도로만 구성되어있기 때문에 이를 사용하기 위해서 이 데이터들을 일련의 좌표변환과정을 거쳐서 3차원 직교좌표계로 변환시킨다. 이 논문의 목적은 회전식 레이저에서 획득된 데이터를 DEM화하고，DEM영상의 밝기값， 즉 높이값을 이용하여 도로변을 주위의 사물과 분리하여 추출하는 것에 있다. 도로면은 일반적으로 주위의 사물에 비해 그 높이가 낮고 고르게 분포되어 있다고 가정한다. 그렇기 때문에 이 도로면의 높이를 대표할 수 있는 적절한 임계값을 찾을 수 있다면 도로면의 분리 또한 가능하다. 도로면의 추출을 위해 제안된 방법은 취득된 레이저 데이터를 일정 간격의 높이로 나누고 그에 대한 히스토그램을 구한 후, 가장 많은 빈도수를 나타낸 지역의 값을 염계치로 설정하는 방법과，레이저 스캐너가 지표면을 향할 때의 각도，즉 270도 일 때 취득된 거리의 값들을 수집한 후, 그 평균값을 임계치로 설정하는 방법이다. 이렇게 구해진 임계치를 이용 그 값보다 작은 지역을 도로로 인식하였으며，실험 결과 레이저 스캐너의 각도를 이용한 방법이 더욱 효과적으로 도로를 추출할 수 있음을 확인할 수 있었다.