• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.1
• /
• pp.153-161
• /
• 2002

This paper develops a finite element model for crashworthiness analysis ova small-sized bus. The full vehicle finite element model is composed of 31,982 shell elements,599 beam elements,42 bar elements, and 34,204 nodes. The model uses four material models (such as elastic, elastic-plastic(steel), rigid. and elastic-plastic (rubber) material model) of PAM-CRASH. The model uses four contact types to define sliding interfaces in ten areas. A frontal crash test using an actual vehicle with 30mph velocity to a rigid barrier is carried out. Vehicle pulses at lower part of left and right b-pillar are measured, and deformed shapes of frame and driver seat's lower left area are photographed. A frontal crash simulation using the developed full vehicle finite element model is performed with PAM-CRASH installed in super computer SP2. The simulation is performed with the same conditions as the test. The measured vehicle pulses and photographed deformed shapes from the test are compared to ones from the simulation to validate the reliability of the developed model.

• 어항어장
• /
• s.2
• /
• pp.86-127
• /
• 1988

버트리스 푸팅 케슨(Buttress footing caisson) 및 상형 푸팅 케슨의 역학특성을 해명하고 구조설계법을 검토할 목적으로 재하실험을 실시했다. 재하실험에는 배근의 제약등을 고려해서 실구조물의 1/4정도의 대형모형공시체를 사용해서 푸팅부를 중심으로 해석하기위해 푸팅에 선분포하중을 재하했다. 유한요소법에 따른 선형구조해석을 실시하여 변위, 단면력과 한계상황설계법에서의 산정식에서 얻어진 단면내력과를 비교하여 동설계법의 케슨구조물에 대한 적용성에 관하여 고찰했다. 이 보고로써 얻어진 주요한 결론은 아래와 같다. (1) 재하실험에 의하면 버트리스 푸팅공시체의 파괴형식은 버트리스부의 철근에 연한 부착할열파괴였다. 또 상형푸팅공시체에서는 푸팅부의 내면전단파괴였다. 양구조물을 설계할 때는 종래의 면외력만의 검토뿐아니라 면내력도 적절히 평가할 필요가 있다. (2) 양공시체 함께 푸팅 케슨본체와의 접합부 및 푸팅과 상자옆쪽의 벽과의 접합부에 변형이 일어나 종래의 판구조설계에서 가정하고 있는 판주변의 고정조건이 만족되지 않았다. 따라서 케슨구조물의 구조해석에서 구조전체계를 취급할 필요가 있고 부재단위에서는 단면력을 과대 또는 과소로 산정할 우려가 있다. (3) 철근강복시정도까지는 구조전체계를 모델화한 유한요소법에 의한 선형구조해석결과와 실험결과가 잘 일치했다. (4) 한계상태설계법에서의 굽음내력, 전단내력 및 구열폭의 산정식은 실험결과와 비교해서 어느쪽이나 안전측의 치를 부여했다.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.9 no.1
• /
• pp.73-78
• /
• 2001

The biological carbon dioxide fixation using microalgae and photo-bioreactor has been known as an effective carbon dioxide reduction technology. As algae has many other environmental factor for its growth, the desirable cultivation factors were investigated using a green alga, Euglena gracilis Z. In this study, Euglena gracilis Z showed good $CO_2$ fixation ability in high $CO_2$ concentration of 10-20% and it contained the high protein and vitamin E enough to be used as fodder. For the mass cultivation, the continuous and semi-continuous cultivation methods were employed. The optimum hydraulic retention time (HRT) for the continuous cultivation was 4 days at carbon dioxide concentration of 10%. In this condition, the final cell number was $3.57{\times}10^6/m{\ell}$. The growth of Euglena gracilis Z increased according to the light intensity.

• Restorative Dentistry and Endodontics
• /
• v.29 no.2
• /
• pp.170-176
• /
• 2004

Objectives : In the unique metal iris method. the developing interfacial gap at the cavity floor resulting from the cavity wall property during polymerizing composite resin might affect the nominal shear bond strength values. The aim of this study is to evaluate that the iris method reduces the cohesive failure in the substrates and the cavity wall property effects on the shear bond strength tests using iris method. Materials and Methods : The occlusal dentin of 64 extracted human molars were randomly divided into 4 groups to simulate two different levels of cavity wall property (metal and dentin iris) and two different materials ($ONE-STEP^{\circledR}$ and $ALL-BOND^{\circledR}$ 2) for each wall property. After positioning the iris on the dentin surface. composite resin was packed and light-cured. After 24 hours the shear bond strength was measured at a crosshead speed of 0.5 mm/min. Fracture analysis was performed using a microscope and SEM. The data was analyzed statistically by a two-way ANOV A and t-test. Results : The shear bond strength with metal iris was significant higher than those with dentin iris (p＝0.034). Using $ONE-STEP^{\circledR}$, the shear bond strength with metal iris was significant higher than those with dentin iris (p＝0.005), but not in $ALL-BOND^{\circledR}$ 2 (p＝0.774). The incidence of cohesive failure was very lower than other shear bond strength tests that did not use iris method. Conclusions：The iris method may significantly reduce the cohesive failures in the substrates. According to the bonding agent systems. the shear bond strength was affected by the cavity wall property.

• Microbiology and Biotechnology Letters
• /
• v.47 no.4
• /
• pp.603-613
• /
• 2019

This study was carried out to examine the antagonistic effect against phytopathogenic fungi of isolated strains from soil samples collected from Busan, Changwon, and Jeju Island: Botrytis cinerea, Colletotrichum acutatum, Corynespora cassiicola, Fusarium sp., Rhizoctonia solani, Phytophthora capsici, and Sclerotinia sclerotiorum. According to results of our studies, isolated strains showed an antagonistic effect against phytopathogenic fungi. Such an antagonistic effect against phytopathogenic fungi is seen due to the production of siderophores, antibiotic substances, and extracellular amylase, cellulase, protease, and xylanase enzyme activities. Extracellular enzymes produced by isolated strains were significant, given that they inhibited the growth of phytopathogenic fungi by causing bacteriolysis of the cell wall of plant pathogenic fungi. This is essential to break down the cell wall of plant pathogenic fungi and thus help plant growth by converting macromolecules, which cannot be used by the plant for growth, into small molecules. In addition, they are putative candidates as biological agents to promote plant growth and inhibit growth of phytopathogenic fungi through nitrogen fixation, indole-3-acetic acid production, siderophore production, and extracellular enzyme activity. Therefore, this study suggests the possibility of using Bacillus subtilis ANGa5, Bacillus aerius ANGa25, and Bacillus methylotrophicus ANGa27 as new biological agents, and it is considered that further studies are necessary to prove their effect as novel biological agents by standardization of formulation and optimization of selected effective microorganisms, determination of their preservation period, and crop cultivation tests.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.8
• /
• pp.132-139
• /
• 2015

Visual SLAM(Simultaneous Localization And Mapping) has been used widely to estimate a mobile robot's location. Visual SLAM estimates relative motions with static visual features over image sequence. Because visual SLAM methods assume generally static features in the environment, we cannot obtain precise results in dynamic situation including many moving objects: cars and human beings. This paper presents a stereo vision based SLAM method in dynamic environment. First, we extract disparity map with stereo vision and compute optical flow. We then compute disparity change that is the estimated flow field between stereo views. After examining the disparity change value, we detect ROIs(Region Of Interest) in disparity space to determine dynamic scene objects. In indoor environment, many structural planes like walls may be determined as false dynamic elements. To solve this problem, we segment the scene into planar structure. More specifically, disparity values by the stereo vision are projected to X-Z plane and we employ Hough transform to determine planes. In final step, we remove ROIs nearby the walls and discriminate static scene elements in indoor environment. The experimental results show that the proposed method can obtain stable performance in dynamic environment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.3
• /
• pp.808-814
• /
• 2010

In this paper we executed a SBL(Short Baseline) underwater acoustic positioning system that is a kind of underwater position estimation system to estimates the 3-dimensional position of ROV(Remotely Operated Vehicle) using hydrophones and DAQ(Data Acquisition) system in the basin which dimensions are $3{\times}3{\times}1.7(m)$. For this experiment, we let 4 hydrophones in different positions of the basin for receiver and 1 hydrophone is fixed on the underwater vehicle for transmitting sensor(pinger). These five hydrophones are communicated with each other to find the 3-D positions of the moving ROV in the basin. The measured signals are collected by DAQ system and the positions of the ROV are plotted by LabView program in real-time. To estimate the position of the ROV we used a trigonometric method. In X and Y plane the estimated data has a small errors but in Z plane the estimated data has large errors so we cannot use this data for position control. One solution of this problem is using depth sensor that implemented of the underwater vehicle. Hereafter, we will test in the ocean using designed SBL system.

• Journal of the Society of Disaster Information
• /
• v.17 no.2
• /
• pp.351-364
• /
• 2021

Purpose: Fire load analysis was conducted to secure basic data for evaluating fire risk of educational facilities. In order to calculate the fire load through a preliminary survey, basic data related to the fire load of school facilities were collected. Method: The basic data were the definition and types of fire loads, combustion heat data for the calculation of fire loads. The fire load was evaluated by multiplying the combustion heat by the weight of the combustibles in the compartment when calculating the fire load. Result: As for the fixed combustible materials of A-elementary school, the floor was mainly made of wood, in consideration of emotion and safety in the classroom, music room, and school office, and the rest of the compartments were made of stone. The ceiling and walls were made of gypsum board and concrete, so they were not combustible. The typical inflammable items in each room were desks, chairs, and lockers in the classroom, and the laboratory equipment box and experimental tool box were the main components in the science room, and books, bookshelves, and reading equipment occupied a large proportion in the library room. Conclusion: 'The fire loads of A-elementary' schools according to the combustibles loaded were in the order of library, computer room, English learning room, teacher's office, general classroom, science hall, and music room.

• The Journal of Society for e-Business Studies
• /
• v.8 no.3
• /
• pp.69-86
• /
• 2003

A Protection Profile(PP) is a common security and assurance requirements for a specific class of Information Technology security products such as firewall and smart card. A PP should be included "TOE(Target of Evaluation) Security Environment", which is consisted of subsections: assumptions, treat, organizational security policies. This paper presents a new threats statement generation method for developing TOE security environment section of PP. Our survey guides the statement of threats in CC(Common Criteria) scheme through collected and analysed hundred of threat statements from certified and published real PPs and CC Tool Box/PKB that is included a class of pre-defined threat and attack statements. From the result of the survey, we present a new asset classification method and propose a threats statement generation model. The former is a new asset classification method, and the later is a production rule for a well formed statement of threats.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11a
• /
• pp.482-482
• /
• 2010

하수처리장에서 발생하는 유기성 슬러지는 대부분 해양투기에 의해 처분되고 나머지는 매립, 소각, 퇴비화 등으로 처분된다. 그러나 런던협약 '96 의정서' 발효에 의해 2012년부터 해양투기가 금지되고, 매립장 및 소각장의 신규건설은 님비(NIMBY) 현상에 의해 제한받기 때문에 효과적인 슬러지 처분 및 가용화 방법이 요구되고 있다. 현재 초음파[1]나 열처리[2], 오존[3,4], 미생물 처리[5,6] 등 물리, 화학, 생물학적 처리방안이 연구되고 있으나 이러한 방법들은 에너지 과소비, 2차 오염물질 발생에 따른 처리비용 증가 등의 단점을 가지고 있다. 따라서 본 연구에서는 기존의 연구 방법을 보안하고자 전기분해를 활용하여 슬러지 가용화를 시도함으로써 슬러지 발생을 저감시킬 수 있는 방법을 연구하였다. 본 실험에서는 전기분해를 위해 제작된 불용성 전극은 Titanium에 Iridium을 코팅하여 제작하였고, 최대 20V까지 전압을 고정시키고 시간에 따라 변화되는 전류와 전기전도도, pH 값을 관찰하였다. 실험에 사용된 활성슬러지는 3개월간 합성폐수로 순응화 시킨 후에 시료로 사용하였다. 전기분해에 의해 처리된 활성슬러지의 여액을 분석한 결과 SCOD, TN, TP 농도가 각각 510%, 9%, 106% 증가하였다. 이는 전기분해에 의해 미생물의 세포벽이 파괴되어 세포 내 물질들이 세포 외부로 용출되어 미생물들의 이용이 가능한 상태로 되었음을 알 수 있었다. 이는 국내 하 폐수의 낮은 C/N비 때문에 무산소조에 메탄올 같은 외부 탄소원을 공급하는 대신에 별도의 탄소원 공급 없이 가용화 된 슬러지를 반송시킴으로써 슬러지 저감에 따른 폐기 비용과 운전비용의 절감을 기대할 수 있어, 근본적인 슬러지 발생을 저감시킬 수 있는 해결책이라 할 수 있다.