배터리를 사용하는 하이브리드 시스템의 확장으로 인하여 2차 전지를 활용할 수 있는 양방향 컨버터의 사용이 증가하고 이에 대한 연구의 필요성 또한 증가하고 있다. 기존 비절연형 단방향 컨버터는 인덕터의 전류와 부하단 캐패시터의 전압을 변수로 지정하고 고정 전원과 고정부하를 대입하여 모델링에 적용했지만, 실제 사용되는 양방향 컨버터의 동작과는 차이가 있다. 또한 이상적인 전원과는 달리 배터리의 단자전압은 SOC 및 충방전 상태에 따라 전압 변동이 일어나고 컨버터의 스위칭 동작에 의해 전압 리플이 발생하기 때문에 제어기를 설계하기 위해서는 이를 반영하여 해석하는 것이 필요하다. 본 논문에서는 비절연형 양방향 컨버터의 양쪽에 부착된 캐패시터가 모두 변수로 적용된 전달함수와 이를 이용하여 설계된 제어기를 제안한다. 컨버터 모델링에 State-Space Averaging 방법을 사용하여 양방향 컨버터의 소신호 분석을 하였고, 충전 모드와 방전 모드 일때 전달함수를 각각 구하였다. 앞서 구한 전달함수를 이용하여 pole/zero 분석을 통해 PI 제어기 설계를 하였고, 주파수 분석을 통해 안정성을 확인하였다.
Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
/
2009.11a
/
pp.221-221
/
2009
This paper is focused on understanding the interrupting capability, more specifically of the fix contact, based on the shape of the contact system in the current MCCB. The magnetic driving force was calculated by using the flux densities induced by the arc current, which are obtained by three-dimensional finite element method. There is a need to assure that the optimum design required to analyze the electromagnetic forces of the contact system generated by current and the flux density be present. This is paper present our computational analysis on contact system in MCCB.
Proceedings of the Korean Vacuum Society Conference
/
2016.02a
/
pp.339.2-339.2
/
2016
본 연구에서는 Ti/Al/Ti 금속 배선의 Electro-Migration(EM) 현상을 분석했다. Van der Pauw, Greek Cross bridge, Straight line linear line bridge를 결합한 패턴을 제작하여, 온도 변화에 따른 EM의 발생 시간(Failure Time)을 측정했다. 측정 조건은 W/L=3.5/300 um 소자에 전류 밀도(current density)를 $J=10^4A/cm^2$로 고정하고, 온도를 300 K, 350 K, 400 K로 가변 시켰다. 측정된 Cumulative Failure의 50 % 되는 지점(Median Time To Failure; MTTF)은 각각 22.3시간, 18.46시간, 15.4시간으로 온도가 300 K에서 400 K로 증가함에 따라 MTTF가 6.9시간 감소했다. 이 결과를 통해 Black방정식에서 온도 변수가 $t_{50}$에 영향을 주는 것을 확인했다. 온도가 증가함에 따라 더 많은 전자들이 원자에 충돌하면서 운동량을 전달하고, 더 많은 원자들이 이주되면서 EM 발생 시간이 감소했다.
Park, Jin-Young;Bang, Sun-Bae;Kim, Dong-Ook;Lee, Ki-Yeon;Kim, Jae-Hyun;Park, Kwang-Muk
Proceedings of the KIEE Conference
/
2015.07a
/
pp.705-706
/
2015
본 논문은 선풍기 모터의 회전을 정상, Jam상태(정격속도의 20%이내), 구속상태로 구분하여 주권선에서의 온도특성 및 전류를 분석하여 전기화재 위험성을 제시하는 것을 목적으로 하고 있다. 온도의 경우 정상상태 $61^{\circ}C$, Jam상태 $113^{\circ}C$, 구속상태 $133^{\circ}C$로 측정되었다. 선풍기의 경우 대부분의 전기배선이 모터의 고정자 철심에 부착되어 있으며 전선의 허용온도가 $60^{\circ}C$인 점을 감안했을 때 절연열화가 가속될 수 있다. 전류의 경우 정상상태와 구속상태의 차이가 35mA로 가장 높게 났다.
Proceedings of the Korean Institute of Intelligent Systems Conference
/
1997.11a
/
pp.67-72
/
1997
본 논문은 저비용이면서 정확한 제어를 수행하는 새로운 퍼지 제어기의 재구성 가능한 FPGA 시스템상의 구현을 다룬다. 제안한 퍼지 제어기 (Fuzzy Logic Controller : FLC)의 시스템 구조와 이의 VHDL 설계 및 시뮬레이션은 다른 논문에 나타나 있다. 제안한 퍼지 제어기의 구현 과정은 다음과 같다. 각 모듈은 VHDL 언어에 의해서 기술된 뒤, Synopsys사의 FPGA 컴파일러에 의해 합성된다. 합성된 각 모듈은 Xilinx사의 XactStep 6.0에 의해 최적화 및 배치, 배선이 이루어진다. 얻어진 Xilinx rawbit 파일은 VCC사의 r2h에 의해 C 언어의 header 파일 형태의 하드웨어 object로 변환된다. C언어 형태의 하드웨어 object를 포함하는 응용 제어 프로그램이 C 컴파일러에 의해 컴파일된 후, 이 실행 파일이 재구성 가능한 FPGA 시스템 상에 다운로드된다. 제안한 퍼지 제어기를 EVCI 보드 상에 동적으로 구현하여 트럭 후진 주차 제어에 사용할 때 걸리는 시간을 Synopsys사의 VHDL 시뮬레이터와 워크스테이션상에서 C언어에 의해 구현하여 트럭 후진 주차 제어에 사용할 때 걸리는 시간을 각각 비교하였다.
Journal of the Institute of Electronics Engineers of Korea SD
/
v.39
no.6
/
pp.34-43
/
2002
This paper deals with a standard cell placement which is based on a quadratic programming. This paper proposes a new additional force to reduce the cell overlap and to get a uniform distribution of cells. The additional force is not concerned with interconnections between cells, but it is determined by the density of a placement area. In this paper, we modelled that the new additional force is a force which is caused by the dummy fixed cell. And it is used for the global placement. Proposed placement method is compared with TimberWolf v7.0 and Itools vl.4. Proposed placer achieved 7.5% average reduction in wirelength in non timing driven mode, 5.0% average reduction in wlrelength in timing driven mode compared to TimberWolf v7.0. And we got a comparable result to Itools vl.4.
Park, Myeong-Jun;Kim, Seong-Jun;Kim, Su-In;Lee, Chang-U
Proceedings of the Korean Vacuum Society Conference
/
2014.02a
/
pp.354.2-354.2
/
2014
최근 반도체 산업의 발전에 따라 반도체 소자 내 배선재료로 사용되던 Aluminium (Al)의 대체물로 Copper (Cu)가 사용되고 있다. Cu는 Al보다 우수한 전도성과 비용이 저렴하다는 장점이 있으나 반도체 기판과의 확산으로 이를 해결해야만 하는 문제점이 있다. 이는 Si와 Cu사이에 확산방지막을 사용하여 해결할 수 있는데 Hafnium Nitride (HfN) 박막은 다른 물질과 비교해 고온에서의 안정성과 낮은 비저항을 가지고 있어 주목을 받고 있다. 본 연구에서는 rf magnetron sputter 방법으로 박막 증착 시에 인가하는 rf power가 박막의 표면 특성에 어떠한 영향을 미치는지 nano-indenter를 사용해 surface hardness와 elastic modulus의 변화를 중심으로 알아보았다. 시료는 rf magnetron sputter로 증착 시 인가하는 plasma power를 60W와 80W로 달리하여 증착하였다. 증착가스는 Ar과 $N_2$를 조절하여 사용하였고 총 유량을 40 sccm 으로 고정하였으며, 이 때 압력은 3mTorr로 유지하였다. 실험결과 plasma power를 80W로 인가하여 증착한 시료의 surface hardness (18.48 GPa)가 60W로 증착한 시료의 surface hardness (12.03 GPa)보다 큰 값을 나타내었다. 이와 마찬가지로 80W로 증착한 시료의 elastic modulus(187.16 GPa)도 60W로 증착한 시료의 탄성계수 (141.15 GPa)보다 큰 값을 나타내었다. 이는 증착 시 인가하는 plasma power의 크기가 증가하면 박막표면에 compressive stress가 생성되어 박막의 surface hardness와 elastic modulus가 상대적으로 높게 측정되는 것으로 생각된다.
The Journal of Korean Society for Radiation Therapy
/
v.24
no.2
/
pp.175-181
/
2012
Purpose: This study aimed to analyze the influence of aquaplastic mask which is used for the radiotherapy for patients with head and neck cancer on patient positioning by analyzing the results of 2D/2D matching with the use of Exactrac 6D couch system. Materials and Methods: 2D/2D matching-based Image guidance was performed with the use of Exactrac 6D couch system on a total of 14 patients with head and neck cancer who received radiotherapy at this hospital in a period from June 2010 to June 2011. The adjusted 6D values obtained after the image guidance were classified into values related with patients and values not related with patients as to the correlation between the results. Results: In the analysis of the relation of each adjusted value to patients, the coefficient of determination ($R^2$) of longitudinal and pitch direction was 0.76, of longitudinal and yaw direction was 0.48, and of pitch and yaw direction was 0.42 although the coefficient of determination for above factors was 0.03 or less when the dependency of patients was excluded. Conclusion: It was demonstrated that intrinsic factors of aquaplastic mask had influence on the immobilization of patients by aquaplastic mask although various factors related with patients had influence on the immobilization of patients. It is believed that if these factors are adjusted, the treatment of patients with head and neck cancer can be more accurate.
Journal of the Korea Academia-Industrial cooperation Society
/
v.17
no.9
/
pp.351-358
/
2016
An Electrical Point Machine (NS:New-type Switch), which is equipped and operated at railways in Korea, has been used since the 1960s after being imported from Japan. On the other hand, although the mechanical configuration has improved the position motor control circuit, the electrical connection has not been improved, so NS may have a problem, such as the interlocking system of automatic train operation. In addition, NS is the most vulnerable part in the railway system and a huge train accident may occur due to minor defects. The existing NS wiring set of the circuit controller should be checked only if fixed. Therefore, an excessive inspection time only by a Railroad Signal expert is required. In this paper, the improvement of electrical connection in a NS wiring set, such as the position motor control circuit, was developed and the prototype was installed at Seoul Metro in the distance to go section. The results can be used to help make appropriate adjustments. The improvement of the NS wiring set enhance the maintenance efficiency, passenger service and the stability of the signal system as well as reducing the maintenance cost.
The Journal of the Institute of Internet, Broadcasting and Communication
/
v.16
no.6
/
pp.147-152
/
2016
Wireless sensor networks that are easy to deploy and install are ideal for building a system that monitors the condition of the equipment in a factory environment where wiring is difficult. The ZigBee has characteristics of low price and low power compared with other wireless communication protocols and is suitable for a monitoring system requiring a plurality of nodes. ZigBee communication requires encryption security between devices because all protocol layers are based on OTM trusted by each other. In the communication between nodes, node authentication must be guaranteed and exposure of confidential information managed by each node should be minimized. The facilities of the factory are regular and stationary in distribution location. In order to protect the information gathered from the sensor in the factory environment and the actuator control information connected to the sensor node, we propose a cryptosystem based on the two - dimensional grid - based key distribution method similar to the distribution environment of the facility.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.