• Environmental engineer
• /
• v.24 s.254
• /
• pp.54-59
• /
• 2007

본 기술은 각종 산업시설과 환경 기초 시설로부터 대기중으로 배출되는 악취 및 휘발성 유기화합물(Volatile Organic Chemicals; VOC)을 미생물의 분해 작용을 활용하여 제거하는 장치로 오염 물질의 분해과정에서 미생물의 과다생장에 의한 악취 및 휘발성 유기화합물 제거장치의 막힘현상을 미생물 고정화 담체의 교반과 살수과정을 통해 담체표면의 생물막을 효과적으로 제거하는 방법을 이용하여 오염 가스속에 함유되어 있는 악취 및 휘발성 유기화합물을 효율적으로 제거할 수 있는 기술이다. 특히, 미생물 담체의 교반 장치는 미생물 고정화 담체를 교반시켜 생물막을 탈리 시킴으로써 미생물의 생장에 의한 막힘 현상과 이로 인한 압력 손실 증가와 악취 및 휘발성 유기화합물의 제거성능의 저하를 근본적으로 해결할 수 있다.

• KSBB Journal
• /
• v.11 no.1
• /
• pp.30-36
• /
• 1996

Based on fermentation data for cyclosporin A production, simple Monod kinetics was proposed for both immobilized and suspended cultures. Higher value of $\mu$mas and lower value of Km suggest better catalytic activity of the immobilized cells than the parallel suspended cells. Furthermore, lower Km value in the immobilized cell system indicates higher affinity of the immobilized cells for carbon substrate as compared with the suspended cells. For immobilized cell cultures, these parameters were also utilized for the estimation of effectiveness factor, an indicator for intraparticle mass transfer resistance. Based on simulation studies, optimum radius of celite beads was turned out $100 ~ 500{\mu}m$In this simulation work, we examined the influence of biosupport size and immobilized biomass density on diffusional resistance of substrate inside the bead matrix. In order to maintain uniformly distributed cell activities in biosupport, it was essential to determine optimum slze of particle, and then to estimate the most economic loaded biomass content.

• KSBB Journal
• /
• v.10 no.2
• /
• pp.166-169
• /
• 1995

Spores of Trichoderma harzianum TCC 52445 for control of Rhlzocronia stem canker on potato were immobilized in various natural matrix, and germination rate and some rheological properties of the spore-matrix complex were Investigated. Germination rate of gelatin gel-spore complex and potato starch gel-spore complex were 2.8% and 2.9%, respectively, but hardness and cohesiveness of the gelstin gel-spoke complex were better than those of potato starch-spore complex. The hardness and cohesiveness were increased when the spores were immobilized in hybrid gelatin gel made by mixing several different types of natural matrix, but decreased their germination rate. Addition of corn steep liquor (1%) as spore nutrient in gelatin gel-spore complex was helpful for increasing the germination rate.

• KSBB Journal
• /
• v.18 no.5
• /
• pp.412-417
• /
• 2003

We first investigated basic characteristics of reticulated polyurethane (PU) foams as microbial carriers. In general, the specific surface area of PU foams increases with respect to decreasing pore sizes. However, the number of microbes adhered on the unit surface of reticulated PU foams decreases with respect to decreasing pore sizes. Thus, as a result of totally considering all effects such as apparent density, hydrolysis rate, and adhesion, we can know that PU foams with 45 PPI is the most appropriate microbial carrier. In this study, we can also investigate the effect of various physico-chemical surface treatments on the adhesion of microbes on the surface of PU foams. We used a chitosan treatment, a PEI (Polyethylene Imine) treatment, a xanthane treatment and a plasma treatment. As a result of comparing all surface treatments, the plasma surface treatment was the best.

• KSBB Journal
• /
• v.18 no.3
• /
• pp.243-247
• /
• 2003

The microbial immobilization media with curdlan and activated carbon which has great immobilization capacity has been developed. Characteristics of porosity and mechanical strength of this support media are dependent on manufacturing method. The support media showed the best cell immobilization performance when the ratio of curdlan and activated carbon was 30 g/L to 6 g/L in this study. The immobilization of iron-oxidizing bacteria on the supporting particles was photographed with a scanning electron microscope. Since cell concentration on the surface of supporting particle increased with the reaction time, the iron oxidation rate also increased.

• KSBB Journal
• /
• v.21 no.5
• /
• pp.384-388
• /
• 2006

The production stability of high-yielding mutants of Streptomyces lincolnensis immobilized on celite beads was examined in repeated batch cultures. We also explored the feasibility of immobilization of vegetative mycelial cells on pre-wetted celite beads, which is practical method for cell immobilization. Repeated transfer of immobilized cells into fresh medium every 10 days increased productivity of immobilized cells and maximum concentration of lincomycin, 1007 $({\pm}256)$ mg/L, was obtained at the end of the ninth cycle. A 1.4-fold higher productivity was obtained in immobilized-cell culture than that obtained by suspended-cell culture. When pre-wetted beads were inoculated with vegetative mycelia and cultured a slightly higher amount of immobilized cells and lincomycin was obtained more than those obtained by culture of spores immobilized on dry beads. This result indicates that immobilization of mycelial cells on pre-wetted beads was readily available. This technique is simple and no additional facilities are required for cell immobilization.

• Journal of Environmental Health Sciences
• /
• v.28 no.3
• /
• pp.49-54
• /
• 2002

This study was conducted to evaluate the feasibility and characteristics of poly acrylamide (PAA) immobilized sludge as a microbial entrapment bead for wastewater treatment. In the PAA method of immobilized sludge, it was found that the optimum acrylamide concentration for actual wastewater treatment was to be 12%. When the sequencing batch reactor (SBR) was operated during 30 days, removal efficiencies of TOC and phosphate was 95% and 70ft, respectively. From this research, repeated cycle of anaerobic and aerobic conditions is required to enhance the removal of TOC and phosphate. During the operation, immobilized cells could be used without being disrupted.

• Proceedings of the Korean Society for Applied Microbiology Conference
• /
• 1978.10a
• /
• pp.210.1-210
• /
• 1978

Aspergillus nidulans가 생산하는 naringinase를 ionic binding method 로써 DEAE-Sephadex A-25 를 사용하여 고정화시키는 조건과 그 고정화 효소의 성질에 대하여 검토하였다. 먼저 담체에 흡착되는 효소의 최적 pH는 6.0이었고 조제효소 110units 당 이상적인 담체량은 건조된 담체 1g이었다. 고정화 naringinase의 반응 최적 pH와 온도는 7.0과 5$0^{\circ}C$로서 native enzyme 보다 각각 높았다. 다음은 고정화 효소의 안정성에 미치는 pH와 온도의 영향으로서, pH 5에서 중성의 pH까지는 안정하였고 온도는 5$0^{\circ}C$까지는 안정하였으나 6$0^{\circ}C$ 이상에서는 뚜렷한 activity의 감소를 보였다.

• KSBB Journal
• /
• v.15 no.3
• /
• pp.285-292
• /
• 2000

Support media for yeast immobilization was prepared from a porous volcanic rock used as a moisturizer in orchid growing. The rock was broken to the size of 2-3 mm and burned at $600^{\circ}C$ in a furnace in order to remove organic materials blocking the pores or treated with HCI solution or NaOH solution to remove the inorganic dirts by dissolving. Even through both the acid and the akali solution were effective the latter was not recommendable because it broke the pore structure by dissolving the elements of the media. This media was mainly consisted of SiO2 with $Al_2O_3$ as a minor component and CaO and K2O as trace elements. It had the finely developed pores of $15-80\mu\textrm{m}$size. Yeast immobilization capacity of this media was about $5{\times108}$ cells/ml bed which is large enough to be used for the practical applications. Yeast immobilization capacities of Alumina and Cordierite were much smaller than that of silica-based media. Scanning electron micrograph of Cordierite and Alumina showed uneven surfaces and small size of pores in contrast to relatively smooth surface and large pores of silica based media which means that smooth surface and large pores are desirable for the good adsorption of microbes on the media.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.9
• /
• pp.917-922
• /
• 2005

The wastewaters from textile and dyeing industries are difficult to treat due to its high pH, temperature, color intensity and non-biodegradable organic contents. This study investigated the removal of recalcitrant organics in a dyeing wastewater by using a packed bed reactor (PBR) that contained cell-immobilized pellets. The feed, obtained from an effluent of a biological treatment plant, had $SCOD_{Cr}$ of 330 mg/L and $SBOD_5$ of 20 mg/L on average. In immobilizing the cells to a Polyethylene Glycol(PEG) based medium, activated sludges from either a sewage treatment plant or an industrial wastewater treatment plant were used. When the empty bed contact time (EBCT) was above 8 hrs in the PBR, the $COD_{Cr}$ removal efficiency was over 50% and the $COD_{Mn}$ concentration was 72 mg/L or lower on average, which was substantially lower than the discharge standard of 90 mg/L. The results indicated that the optimum EBCT in the PBR was 8 hrs. The PBR with cell-immobilized pellets was effective as an advanced treatment process after an activated sludge process for treating dyeing wastewaters.