• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.3
• /
• pp.275-284
• /
• 1999

Unbalanced source voltage in the 3-phase power system is decomposed into positive, negative and zero sequence c components. Also, assuming there is no neutral path in the system, the zero sequence component is not shown on the l load side. Therefore, in the unbalanced power system without neutral path. it is possible to provide balanced voltage to t the load side by compensating negative sequence component and also to regulate the voltage amplitude by controlling t the positive sequence component. In addition, the symmetrical components due to voltage unbalance can be effectively d detected on the synchronous reference frame by using dlongleftarrowq transformation. In this paper, an algorithm not only c compensating unbalanced source voltage by canceling the negative sequence component on the synchronous reference f frame but also maintaining load voltages constantly is proposed. Also a novel method for phase angle detection s synchronized by positive sequence component under unbalanced source voltage is suggested and this detected phase a angle is used for d-q transformation. The performances and characteristics of the proposed compensating system are a analyzed by simulation and verified through experimental results.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2009.09a
• /
• pp.1-5
• /
• 2009

Recent growth in global economic situation has led dramatic increase in new buildings of large containerships. These increased new building orders have brought keen concerns of developing and improving the quality of design and increasing the productivity of the vessel in order to satisfy the ship Owner's various requirements. For the increment of productivity and quality of containership, the plastic type bearing pad of cargo hatch cover has been investigated intensively for years with the supplier of cargo hatch cover. The result of investigation showed that there are numbers of advantages for the Owner and Builder over the existing bronze bearing pads which are better corrosion resistance long life time, low friction coefficient, easy maintenance, easy installation, better production lead time and low maintenance cost.

• Magazine of the Korea Concrete Institute
• /
• v.5 no.3
• /
• pp.187-194
• /
• 1993

본 논문에서는 유리섬유의 적층수, 유리섬유의 배향각도에 대한 유리섬유 강화 플라스틱(Glass Fiber Reinforced Plastics ; GFRP)의 인장거동 변화를 고찰하고, 이들의 상관관계를 규명하기 위하여 일련의 GFRP 시험체에 대하여 인장실험을 수행하였다. 시험체는 폭12.5mm, 길이 60mm크기로 일정하게 제작하였으며, 시험체에 대하여 인장실험을 수행하였다. 시험체 제작시 유리섬유로 적층수는 14, 22, 30층, 유리섬유의 배향각도는 0$^{\circ}$, 30$^{\circ}$, 45$^{\circ}$로 하였다. 인장실험시 각 시험체의 파괴양상, 극한하중 및 하중변화에 대한 인장변형율을 조사하였고, 이들 결과를 토대로 유리섬유의 적층수와 배향각도에 따른 GFRP의 극한하중, 응력-변형율 선도 및 탄성계수 등을 비교 분석하였다. 한편 본 논문에서는 유리섬유의 적층수, 직경 변화에 따른 GFRP관의 파괴거동을 고찰하기 위하여 4점 재하법에 의한 GFRP관의 휨파괴실험을 수행하였다. 실험에 사용된 시험체는 길이 1200mm로 하였으며, 유리섬유의 적층수를 30, 35, 40층, 관의 직경을 50, 100, 150mm로 하였다. 파괴실험시 각 시험체의 하중변화에 대한 휨 변형율, 중앙점 처짐량 및 항복하중을 측정하였고, 이들 결과를 토대로 유리섬유으 적층수와 관의 직경에 따라 GFRP관의 항복하중 및 파괴에너지를 비교 분석 하였으며, 항복시 파괴에너지를 추정할 수 있는 제안식을 유도하였다.

• Journal of Society of Preventive Korean Medicine
• /
• v.12 no.2
• /
• pp.85-100
• /
• 2008

The purpose of this study was to determine factors influencing family closeness in family with an elderly members. The study was conducted with 1,904 subjects during 3 months from 1st March to 30,May. 2006. The results were as follows. 1. Family closeness of subjects was significantly associated with age, sex, marital status, monthly allowance, education level, occupation, the number of family members living together, health state, stress, and emotional conflict with children. 2. Emotional conflict with children was significantly associated with age, sex, religion, the number of family members living together, occupation, health state, stress, family closeness. 3. Stress was significantly associated with age, sex, religion, the number of family members living together, occupation, stress, family closeness. Finaly, Family closeness in family with an elderly member was positively related to family type(living with a spouse), monthly allowance, occupation but negatively related to emotional conflict with children and stress levels. The government, social service units and experts need to pay more attention to factors influencing family closeness and devise effective policy and programs for healthier family relations.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2003.11a
• /
• pp.139-142
• /
• 2003

무선 네트워크에서 멀티미디어 전송을 위해 Delay를 줄이는 방법을 연구하고 이에 대한 실험적 검증을 하였다. 멀티미디어 데이터는 그 특성상 주어진 시간에 도착하지 못하는 데이터는 손실로 간주되므로 Loss에 못지 않게 Delay가 중요한 QoS 파라미터가 된다. 본 연구에서는 IEEE 802.11b를 그 환경으로 하여 멀티미디어 데이터를 트랜스코더를 이용하여 미디어 전환 후 전송 학 때 Delay를 최소화 할 수 있는 방안을 연구하였다. 무선 환경에서의 SNR을 기준으로 다양한 조건에서 패킷 사이즈와 전송 간격을 조절하여 무선 네트워크에서 Delay와 Loss가 적게 발생하는 환경을 찾아내었으며 이전 상태와 현재 상태를 비교하여 미래의 상태를 미리 예측학 수 있는 알고리즘을 개발하여 적용하였다. 이러한 연구 결과는 MPEG-4의 Video racket을 가장 효율적인 크기로 인코딩 할 수 있는 판단 근거를 만들게 해 주며, 예측 된 패킷 사이즈를 통하여 다음 전송이 이루어지기 전에 트랜스코더에게 미리 인코딩 하여 준비학 수 있도록 해서 네트워크에 적응적인 전송 방식으로 구현될 수 있는 장점이 있다.

• Review of KIISC
• /
• v.33 no.4
• /
• pp.65-74
• /
• 2023

국제전기통신연합(ITU)은 국제연합(UN) 산하 정보통신기술(ICT)에 대한 전문 국제 표준화기구이다. 193개 회원국, 약 900개 기업 및 학계 멤버 등으로 구성되어 있으며, 산하에 전기통신표준화부문(ITU-T), 전기통신개발부문(ITU-D), 그리고 전파통신 부문(ITU-R) 등 3개의 부문으로 구성되어 있다[1]. ITU-T는 역할과 임무에 따라 11개의 연구반(SG, Study Group)으로 구성되어 있으며, 각 업무에 맞는 선도 그룹(Lead Study Group)을 지정하여 국제 표준을 개발하고 있다. 정보보안 분야 국제 표준은 ITU-T SG17(보안)에서 담당한다[2]. ITU-T 국제 표준화 조직은 4년 주기의 연구회기(Study Period)로 연구반 구조조정, 의장단 선출 및 표준화 추진 방향을 WTSA(World Telecommunication Standardization Assembly) 총회에서 결정한다. 다음 총회는 2024년 10월에 인도에서 열릴 예정이다. 본 논문에서는 지난 2022년 8/9월과 2023년 2/3월 스위스 제네바에서 열린 ITU-T SG17 회의에서 한국이 주도적으로 수행한 정보보호 표준화 활동 결과를 알아보고, 차기 연구회기(2025-2028)를 위한 SG17 구조조정에 대해 2023년 2/3월 SG17 회의 결과와 서신 그룹(CG, 5월-7월) 회의의 주요 결과를 중심으로 제시한다.

• Fire Science and Engineering
• /
• v.31 no.3
• /
• pp.1-10
• /
• 2017

This study examined the risk of accidents when handling hazardous materials in hazardous materials storage facilities without safety facilities. In the case of illegal dangerous cargo containers, the burning rate is very fast in the case of fire, which leads to explosions, that are damaging and difficult to control. In addition, accidents that occur in flammable liquid hazardous materials are caused mostly by accidents that occur in the space due to leakage. Therefore, the variables that affect these accidents were derived and the influence of these variables was investigated. Numerical and computational fluid dynamics programs were used to obtain the following final results. First, when a flammable liquid leaks into a specific space, it is influenced by temperature and relative humidity until a certain concentration (lower limit of combustion) is reached. In the case of temperature, it was found that the reaching time was shorter than the flash point In addition, the effect of variables on pool fire accidents of leakage tanks is somewhat different, but the variables that have the largest influence are the wind speed. Therefore, it is expected that the results of this study will be used as basic data for similar numerical analysis and it will provide useful numerical information about the accidental leakage of hazardous materials under various research conditions.

• 한국가스학회:학술대회논문집
• /
• 2005.10a
• /
• pp.37-43
• /
• 2005

The questionnaires about the safety of the urban gas have been carried out for the end users. about 8 of 10 persons said that the urban gas Is safe to use, whereas $35\%$ of them said there exists a hazard of an accident in thier residences. There cannot be found the clear evidences that the understandings on the safety of the urban gas have no relations to their ages, sex, and monthly incomes, while the safety is less confidential to the highly educated, the accident-experienced, or the mans who are poor at the safety inspections. Most of the questioned man know the inspection knacks for the gas utilities, but only $60\%$ of them carry out it. They said that they do not feel the necessity of the inspection because they are inspected routinely by the suppliers or the inspection companies. This says that the end user does not concern the safety inspections, and in order to improve the dependency of the user for the self-inspections, the inspection staff should educate the user for the necessity and the knack of inspections to encourage the self-inspection of the gas utilities.

• Fire Science and Engineering
• /
• v.15 no.1
• /
• pp.84-92
• /
• 2001

In today's world, rise in the establishment of social infrastructure resulting from population saturation in large cities has led to more extensive and frequent use of chemical materials on facilities. A result, unexpected and serious accidents, hazards, contingencies and disasters are more prevalent than ever. Such phenomenon calls for more devoted and concerted efforts towards finding ways to reduce the safety hazards that are seen to take place more often than before with the increase in the number of facilities that are prone to bring disaster and hazard coupled with the conventional safety problems that continue to exist even today. In developed countries, such challenge is addressed by various appropriate countermeasures drawn up by local professional committees on industrial facilities, whose members conduct offsite and onsite evaluation un the potential industrial disasters and its seriousness and provide their advice thereof. Against this backdrop, this study aims at identifying a comprehensive safety allowance level (safety acceptable level) when imposing limitation on the development of conventional or new facilities, for the fur pose of establishing a safety allowance level of disastrous and dangerous facilities in Korea. This is done by assessing and applying the level of danger each individual is exposed to in a randomly selected region (disastrous and dangerous areas in Seoul) based on probability of quantitative hazards, as well as simulation and calculation methods which include: i) social disaster evaluation method applying Quantified Risk Assessment of Health & Safety Executive of UK and Matrix of Risk of Evaluated Sources of Hazard; ii) Fault Tree or Event Tree Analysis and etc.

• Fire Science and Engineering
• /
• v.20 no.3 s.63
• /
• pp.1-8
• /
• 2006

The purpose of this work is to analyze quantitatively if the safety instrumented system(SIS) like the pressure safety valves(PSV) in the processes of ethyl benzene plant have been designed relevantly to the safety integrity level because overpressure in the benzene or ethyl benzene columns causes the explosive reactions, fires and reactor explosions. The safety integrity level(SIL) 3 has been adopted as a target level of SIS based on the general data of the Probability of Failure on Demand of PSV, $1.00E-4{\sim}1.00E-3$. The standard model of the reliability has been set up and then the fault tree analysis of it has been carried out to get the PFD of SIS, and the results show 8.97E-04, 5.37E-04, 5.37E-04 for benzene prefractionator column, benzene column and EB column, respectively. Thus, we conclude that the SIS is designed to fulfill the condition of SIL3, and when the partial stroke test for the control valve are carried out every sixth month, the SIS of each column is expected to increase its reliability up to $22{\sim}27%$.