• Proceedings of KOSOMES biannual meeting
• /
• 2005.05a
• /
• pp.141-146
• /
• 2005

Ship have cutout inner bottom and girder and floor etc. Ship's structure is used much, and structure strength must be situated, but establish new concept when high stress interacts sometimes fatally the area. There is no big problem usually by aim of weight reduction, a person and change of freight, piping etc. Because cutout's existence grow up in this place, and, elastic buckling strength by load causes large effect in ultimate strength. Therefore, stiffened perforated plate considering buckling strength and ultimate strength is one of important design criteria which must examine when decide structural concept at initial design. Therefore, and, reasonable buckling strength about perforated stiffened plate need to ultimate strength limited design . Calculated ultimate strength varied several web height and cutout's dimension, and thickness in this investigated data. Used program(ANSYS) applied F.E.A code based on finite element method.

• Korean Journal of Soil Science and Fertilizer
• /
• v.20 no.2
• /
• pp.193-197
• /
• 1987

Associative heterotrophic nitrogen fixing bacteria were identified by immunodiffusion method in the histosphere of Planta-ginaceae, Caryophllaceae, Gramineae, and two types of rice cultivars. Twenty four strains associative heterotrophic bacteria with high ARA (more than 10nmole/tube/hr) were isolated from the histosphere of grasses and rice.* Those strains were related with 8 species of Azospirillum, 11 species of Pseudomonas, 2 species of Klebsiella and 2 species of Agrobacterium. Among them Azospirillum sp. and Pseudomonas sp. were predominant in histosphere of grasses and rice cultivars. From the histosphere of Oryza sativa, and Sagina maxima, the strains of Azospirillum, Pseudomonas, Klebsiella, and Agrobacter were identified while Pseudomonas was identified from Ischaemum anthephoroides, Plantago lanceolata, Miscanthus sacchuriflorum, and only Azospirillum was identified from Zoisia sinica, respectively. Associative nitrogen fixing heterotrophic bacteria were more abundant in the histosphere of Oryza sativa and Sagina maxima than that of other grasses grown in saline and reclaimed saline paddy soil.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.1
• /
• pp.153-160
• /
• 2022

This study presents the bogie arrangement of the load-out system for on-ground shipbuilding. The load-out system is one of the most important systems to perform the bogie arrangement of the on-ground shipbuilding technique without dry dock facilities, and this system is composed of four pieces of equipment: bogies, driving bogie with motors, trestles, and power packs. Also, the bogie arrangement analysis (BAA) is employed to simply calculate the reaction forces at the trestle for structural safety. In this context, the purpose of this study is to propose an optimal design method to perform the bogie arrangement satisfying structural safety requirements with minimal cost. It is expected that the proposed methodology will contribute to the effective practice as well as to the improvement of competitive capability for shipbuilding companies at the on-ground shipbuilding stage. Furthermore, we describe some problems and their solutions of the deformation that may occur in the bottom of the hull during the load-out process. As a result, it is shown that we applied it to the 114K crude oil tanker (Minimum bogie 54EA) and the 174K CBM LNG carrier (Minimum bogie 88EA), it can minimize the number of bogie and critical risks (Safety rate 1.61) during the load-out of on-ground shipbuilding. Through this study, the reader will be able to learn successful load-out operation and economic shipbuilding in the future.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.4
• /
• pp.407-416
• /
• 2023

Demand for leisure facilities such as mooring facilities for berthing leisure vessels and floating pensions based on floating bodies is increasing owing to the rapid growth of the population and related industries for marine leisure activities. Owing to its relatively light weight as a fluid, inclination is easily generated by waves and surcharges flowing to the coast, resulting in frequent safety accidents because of the low stability. As a solution to this problem, a motion reduction device for floating bodies is proposed in this study. The device (motion reduction device based on the air pressure dif erence) was attached to a floating body and the effect was analyzed by comparing the results with those of a floating body without motion reduction. The effect analysis was further analyzed using a computer analysis test, and the method for increasing the stability of the floating body was studied, and its the effect was verified. Based on the analysis of the test results, the stability of the floating body increased with a motion damping device is higher than that of the floating body without a motion reducing device as the wave momentum reduces, owing to the air pressure difference. Therefore it was concluded that the use of such a device for reducing motion a floating body is useful not only for non-powered ships but also for powered and semi-submersible ships, and further research should be conducted by applying it to various fields.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.14 no.2
• /
• pp.2622-2633
• /
• 1972

This study was attempted in order to search for phyosical properties on various mix designs of concrete as ne of studies relating top revention against corrosion by action of sea water in the West Sea. In this study, as concerete mix design, fly ash, pozzolith and vinsolresin were used as admixtures for normal portland cement respectively, and pozzolan cement and normal cement were also used for each plain concrete. Concrete specimens were made and cured in accordance with the Korean Standard Specifications for concrete. In thetest, compressive strengths of the specimens were measured at the following ages; 7-day, 28-days and 3-months. Absorption test was made by immersing the specimens in water kept at boiling temperature for 5 hours. The results obtained from the tests are summarized as follows; 1. The use of fly ash as an admixture in mix design of concrete, has an effect on compressive strength at each age. But it is actually not effective on absorption by concrete, as the result of the fly ash concrete is almost the same at that of ordinary plain concrete. 2. The use of pozzolith as an admixture in mix design of concrete, has an effect on both of compressive strength at each age and absorption rate. The pozzolith is more effective than vinsol resin, relating to improvement for physical proreties of concrete. 3. The use of vinsol resin as an admixture in mix design of concrete, has also an effect on both of compressive strength at each age and absorption rate. As the above fact, effectiveness of the vinsol resin is some what lower than pozzolith, as far as physical properties of the concrete are concerned. 4. Plain concrete used pozzolan cement only is the most effective on both of strength at each age and absorption rate in this study. The pozzolan cement is characteristic of higher strenth as the age is later. 5. Relationship between compreessive strengths and absorption rates of the concrete is shown by a different regression line dependingon ages. The gradient of the regression line is steeper as the age is later. 6. Throught physical test, it may be expected that the use of pozzolith and vinsol resinas asan admixture respectively will be better resistant than fly ash or ordinary plain concrete and that plain pozzolan concrete will also be the best resistant to action of sea water due to improvement of theirphysical properties.

• Korean Journal of Soil Science and Fertilizer
• /
• v.24 no.1
• /
• pp.69-76
• /
• 1991

A pot experiment was conducted to find out the effects of lime and phosphate application on the changes of number of soil microorganisms, indigenous Rhizobium japonicum, nodule formation, and ureide-and amide-N in leaf and stem exudate of soybean plant under uncultivated hillside red earth in very low pH value, organic matter, available phosphate, and cation exchange capacity. The results obtained were summarized as follows : 1. The plant height, stem length, root dry weight and nodule weight were significantly increased with the application of lime and phosphate application than that of control plot. 2. The concentration of amide-N in soybean plant at the 45 days after sowing was obtained as high in order of control>lime> lime+phosphate while the concentration was obtained in order of Iime+phosphate>lime> control at flowering stage 3. However, concentration of ureide-N in the soybean leaf at the 45 days after sowing was obtained as high in order of control>lime>lime+hosphate while reversed concentration was obtained in stem. 4. The number of soil microorgan isms were increased with increase of pH value, available phosphate and soil exchangeable cation. 5. Significantly negative high correlation were obtained with the concentration of Al, Fe in soil and the concentration of amide-and ureide-N in soybean plant at flowering stage while positive correlation was obtained with plant growth and the concentration of ureide-N.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.14 no.4
• /
• pp.343-356
• /
• 2016

The Korea Radioactive Waste Agency (KORAD) has developed a dual-purpose metal cask for the dry storage of spent nuclear fuel that has been generated by domestic light-water reactors. The metal cask was designed in compliance with international and domestic technology standards, and safety was the most important consideration in developing the design. It was designed to maintain its integrity for 50 years in terms of major safety factors. The metal cask ensures the minimization of waste generated by maintenance activities during the storage period as well as the safe management of the waste. An activation evaluation of the main body, which includes internal and external components of metal casks whose design lifetime has expired, provides quantitative data on their radioactive inventory. The radioactive inventory of the main body and the components of the metal cask were calculated by applying the MCNP5 ORIGEN-2 evaluation system and by considering each component's chemical composition, neutron flux distribution, and reaction rate, as well as the duration of neutron irradiation during the storage period. The evaluation results revealed that 10 years after the end of the cask's design life, $^{60}Co$ had greater radioactivity than other nuclides among the metal materials. In the case of the neutron shield, nuclides that emit high-energy gamma rays such as $^{28}Al$ and $^{24}Na$ had greater radioactivity immediately after the design lifetime. However, their radioactivity level became negligible after six months due to their short half-life. The surface exposure dose rates of the canister and the main body of the metal cask from which the spent nuclear fuel had been removed with expiration of the design lifetime were determined to be at very low levels, and the radiation exposure doses to which radiation workers were subjected during the decommissioning process appeared to be at insignificant levels. The evaluations of this study strongly suggest that the nuclide inventory of a spent nuclear fuel metal cask can be utilized as basic data when decommissioning of a metal cask is planned, for example, for the development of a decommissioning plan, the determination of a decommissioning method, the estimation of radiation exposure to workers engaged in decommissioning operations, the management/reuse of radioactive wastes, etc.

• Journal of the Korean Magnetics Society
• /
• v.5 no.4
• /
• pp.269-274
• /
• 1995

The basic composition of Mn-Zn ferrite was $Mn_{0.631}Zn_{0.316}Fe_{2.053}O_{4}$(specimen A), $Mn_{0.584}Zn_{0.312}Fe_{2.104}O_{4}$(specimen B) and $Mn_{0.538}Zn_{0.308}Fe_{2.154}O_{4}$(specimen C) with additional 0.1 mol % $CaCo_{3}$ and 0.04 mol % $V_{2}O_{5}$. For high per¬meability and acceleration of grain growth, $CaCo_{3}$ and $V_{2}O_{5}$. was added. The mixture of the law materials was calcinated at $950^{\circ}C$ for 3 hours and then milled. The compacts of toroidal type were sintered at different temperature($1250^{\circ}C$, $1300^{\circ}C$, $1350^{\circ}C$) for 2 hours in $N_2$ atmosphere. The effects of the various raw material composition and sintered temperature on the physical properties of Mn-Zn ferrite have been investigated. They turned out to be spinel structure by X-ray diffraction and the size of grain from SEM was from $18\;\mu\textrm{m}\;to\;23\;\mu\textrm{m}$. As the sintering temperature was increased from $1250^{\circ}C$ to $1350^{\circ}C$, the initial permeability and magnetic induction has increased and the both of Q factor and coercive force has decreased. The coercive force and curie temperature were almost the same at each specimen Their values were about 0.45 Oe and $200^{\circ}C$. The frequency of specimen will used in the range from 200 kHz to 2 MHz. The basic composition of $Mn_{0.584}Zn_{0.312}Fe_{2.104}O_{4}$(specimen B) sintered at $1300^{\circ}C$ shows the best results at magnetic induction (Br & Bm).

• Korean Journal of Soil Science and Fertilizer
• /
• v.22 no.4
• /
• pp.329-336
• /
• 1989

A series of green house experiment was conducted to find but the effect of fertilizer application and inoculation of rhizobium on the changes of amide-N, ureide-N and $NH_4-N$ concentration in stem and root exudates of soybean plant growth. The results obtained were summarized as follows ; 1. Five strains of indigenous Rhizobium japonicum-nitrogen fixing activity($C_2H_2$-reducing activity) was more than 6.4 to 20.1 nmole/hr/tube-were identified from 37 soil samples in 22 areas of farmers field throughout country. 2. These identified 5 strains of rhizobium were obtained high nitrate reductase but low ammonium and nitrite oxidase activities. Among 5 strains of rhizobium the Rhizobium japonicum RjK-134 was applied for this green house experiment. 3. Dry matter yield was increased by the combination of inoculation of Rhizobium japonicum RjK-134 with no fertilizer and without nitrogen fertilizer application. However, dry matter yield was decreased with application of N and NPK with inoculation of rhizobium. 4. The concentrations of amide-N and ureide-N were increased in xylem sap than that of root exudate and higher concentration was obtained ar 30 days after planting than flowering stage (45 days after planting). 5. The combination of NPK application with inoculation of Rhrizobium japonicum RjK-134 enhanced the increase of amide-N and ureide-N concentration in xylem sap and root exudate. 6. High ammonium-N concentration in xylem sap and root exudate were obtained in combination with without-fertilizer under no inoculation of rhizobium and N and NPK application with inoculation of rhizobium.