• Journal of the Korean Institute of Intelligent Systems
• /
• v.23 no.3
• /
• pp.214-219
• /
• 2013

This paper proposes the robust high-gain observer based SOC estimatro for uncertain RC model of Li-Ion batteries. In general, RC battery model has inevitable uncertainties and it cause some negative effect to estimate the accurate SOC of Li-Ion batteries. The proposed estimator overcomes such weakness with two techniques; high-gain observer design technique and sliding mode control technique. A high-gain observer provides the robustness against model uncertainties to the proposed estimator. A sliding mode control technique helps the proposed estimator by reducing the side effect of adopting a high-gain observer such as peaking phenomenon and perturbation. The performance of the proposed estimator is verified by some simulation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.3
• /
• pp.485-491
• /
• 2003

In this paper, We designed the multi-stage amplifier having high gain/low noise characteristics for terrestial repeater of direct digital satellite broadcasting system. In the design the amplifier, we optimized the parameters to have the stable operation between gain, noise figure and stability. The first stage of amplifier can be specified low noise impedance matching, 2nd stage to 5th stage show constant gain and stable operation and final stage of amplifier shows high gain impedance matching. As a result of experiment at the frequency of digital satellite terrestial, show 68dB gain under 2,4dB noise figure and 63dB dynamic range in the 11.7GHz-12.7GHz frequency range, it is a good agreement of communication channel amplifier requirements for satellite terrestial repeater.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.10
• /
• pp.1083-1088
• /
• 2002

A 5.8 GHz high gain MMIC amplifier was designed and fabricated. A HEMT was used as a active device and the spiral inductors and the metal insulator metal capacitors were used as the passive devices. To stabilize the high gain amplifier a RC feedback circuit was used. The amplifier has 4 stage and 31 dB measured gain. To prevent a oscillation by the coupling effects among the passive devices, the distance between the passive devices are made as far as possible. The via grounds were used to reduce the coupling effect between the input stage and the output stage.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.4
• /
• pp.822-828
• /
• 2001

In this paper, a high gain microstrip antenna with rectangular cavity backed is designed. A single microstrip patch is basically a low gain radiator As a ga in enhancement method, superstrate loading techniques are applied to the $2\times2$ microstrip array antenna with cavity backed. In antenna design, although the broadside gain increases as the cavity is enlarged, a cavity size of $3\times3$ wavelength is sufficient. The distance between the radiating elements is chosen as 1.5 free-space wavelength. The antenna radiation characteristics are calculated by IE3D software and compared with the experimental results. Experimental results show that the maximum gain is 18.6dBi at the frequency of 9.16GHz, which is good agreement with the calculations.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.3
• /
• pp.64-71
• /
• 2008

본 고에서는 의도성 기기에 대한 전자파 간섭을 규제하는 방법 중에서 "공중선전력+안텐 이득"을 통해 규제를 행하는 경우, 합리적인 안테나 이득 측정 방법에 대해 나타내고자 한다. 이는 ERP/EIRP를 규제 대상으로 하는 것, 이 외에도 공중선전력과 안테나 이득에 대해서도 규제하겠다는 의미인 것이다. 한편, 중 출력 혹은 대 출력의 무선 장비의 ERP/EIRP를 산출하는 경우에 매우 유용하고 합리적인 방안이 될수 있다. 본 고에서는 간섭 통제를 위한 안테나 이득 측정 기술을 나타내고자 한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.402-403
• /
• 2018

70GHz-band high gain array antenna is developed for automotive short range radar sensor. In Short-rangeradar, the gain must be high in order to increase the resolution, and the angle width must be set to secure the field of view(Fov). The proposed antenna operates at 76~81GHz and satisfies angle width $60^{\circ}$, antenna gain 15dB and the input reflection coefficient of less than -10dB within the operating frequency. Wave guide WR-10 was used to measure the antenna and results similar to the simulation results were obtained.

• Journal of Navigation and Port Research
• /
• v.34 no.1
• /
• pp.21-26
• /
• 2010

This paper describes patch antenna design method of antenna high gain and broad bandwidth using cylindrical magneto material around feeding line. Strong current induction method applied combination to generate magnetic fields around feeding line for antenna high gain characteristic and principle of PIFA designed application for design of antenna broadband. In case of single CMM, gain increased 3.96 dB compare with the reference antenna gain however bandwidth characteristic not increased compare with the reference antenna. In case of dual CMM, gain improved about 10 dB compare with the reference antenna and -10 below bandwidth is 700 MHz(50 MHz~750 MHz) with this paper designed high gain characteristic.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.47 no.2
• /
• pp.8-15
• /
• 2010

This paper proposes a robust high-gain observer design scheme for nonlinear systems and its stability is analyzed based on Lyapunov theory. It is assumed that their states are unmeasurable. The proposed high-gain observer has the integrator of the estimation error in dynamics. It improves the performance of high-gain observers and makes the proposed observer robust to noisy measurements, uncertainties and peaking phenomenon as well. Its stability is analyzed by the Lyapunov approach. In order to verify the effectiveness of the proposed scheme, it is applied to output feedback controllers and some comparative simulation result with the existed observer based output feedback controllers and state feedback controllers is given.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.8
• /
• pp.959-965
• /
• 2019

In this paper, we design a low noise amplifier to support ka-band satellite communication systems using 65-nm RFCMOS process. The proposed low noise amplifier is designed with high-gain mode and low-gain mode, and is designed to control the gain according to the magnitude of the input signal. In order to reduce the power consumption, the supply voltage of the entire circuit is limited to 1 V or less. We proposed the gain control circuit that consists of the inverter structure. The 3D EM simulator is used to reduce the size of the circuit. The size of the designed amplifier including pad is $0.33mm^2$. The fabricated amplifier has a -7 dB gain control range in 3 dB bandwidth and the reflection coefficient is less than -6 dB in high gain mode and less than -15 dB in low gain mode.

• ICROS
• /
• v.17 no.1
• /
• pp.31-38
• /
• 2011

주파수 영역에서 제어기를 설계하기 위해서는 시스템의 대역폭, 초대 주파수 응답, 저주파에서의 이득, 고주파에서의 이득 감쇄 정도를 고려한다. 또한 나이퀴스트 선도, 보우드 선도 등을 활용하여 폐루프 제어 시스템의 이득여유, 위상 여유를 확보할 수 있도록 한다. 일반적으로 저주파 영역에서는 개루프의 이득이 기준치보다 크도록 하고, 고주파수 영역에서는 기준치보다 작도록 설계를 하며, 폐루프 응답에서 대역폭이 유지되고, 공진피크점의 응답 크기는 1에 비하여 과도하게 크지 않도록 설계를 한다.