• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.314-317
• /
• 2002

The sloshing phenomenon sometimes happens to be occurred in the liquid storage tank due to the unexpected and/or inevitable vibrating conditions and may result in severe effects on the structural stability. This study deals with the development of experimental techniques for the evaluation of sloshing behavior in the liquid storage tank and for the identification of natural frequencies and mode shapes by varying with various vibrating conditions. In addition, suitable method is suggested to minimize the sloshing effect on the liquid storage tank and its validity is experimentally investigate d.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 춘계학술대회 논문집
• /
• pp.131-136
• /
• 1993

일반적으로 공작기계 주축계에 대해서 요구되는 기본적인 항목들로는 고강성, 고감쇠, 고회전정밀도, 저발열, 장수명 등이 있다. 최근에는 이러한 기능들과 함께 가공능률과 가공정밀도의 향상을 도모하기 위해서 고속절삭을 실현햐ㄹ 수 있는 공작기계 주축계의 고속화, 즉 고속 주축계에 대한 연구가 활발히 진행되고 있다. 본 연구에서는 고속주축계의 동특성을 체계적으로해석하기 위해서 주축회전수의 영향을 고려한 유한요소모델(finite element model)을 도입하였다. 특히 주축은 세장비가 비교적 자기 때문에 Timoshenko보 이론으로, 베어링은 유한한 폭을 가지고 있기 때문에 반경방향 외에도 모멘트방향의 강성 및 감쇠특성을 가지고 있는 것으로 모델화 하였다. 그리고 고속주축계의 설계조건들을 도출하기 위해서 동특성 해석결과들로 부터 고속주축계의 모드매개변수들인 고유진동수와 감쇠비에 대한 주축 회전수, 베어링의 지지특성, 베어 링의 간격, 주축재료의 내부감쇠율 등의 영향을 고찰하였다.

• 한국안전학회지
• /
• 제13권4호
• /
• pp.286-291
• /
• 1998

이 논문은 기기검증 중 내진검증(안전)을 위한 접근방법의 일환으로 실험을 통한 유한요소 해석 모델을 개발하였다. 이 모델은 한국원자력연구소 내의 하나로원자로 전기설비 중의 일부분인 UPS를 내진검증하기 위한 것이다. 이 시험증명용 모델은 50Hz 미만의 모든 주요 모드에서 고유진동수가 약 5%이내의 오차를 갖는 값을 예측하였다. 이 모델은 내진검증을 위한 최종 응력해석에 적합하였으며 실제 기기의 동적특성의 예측에 고 정밀도를 보여주었다.

• 한국자동차공학회논문집
• /
• 제17권4호
• /
• pp.108-117
• /
• 2009

Leissa claimed in his article that the Rayleigh method is not the same as the Ritz method for determining natural frequencies and its corresponding mode shapes and contended that Rayleigh's name should not be attached to the method. The present article examines the methods in viewpoint of admissible functions and its minimization process, and of the historical developments. It concludes that Leissa's assertion is relevant, although Rayleigh did apply a conceptual theory systematized from the Lagrange method, and given 38 years earlier than Ritz's 'masterly exposition of theory'.

• 대한기계학회논문집
• /
• 제19권2호
• /
• pp.363-373
• /
• 1995

In this study, a FE model tuning method using experimental modal data was suggested after examining all the published conventional methods. The idea of this method is introducing scale factors to maintain both the structural connectivity and the consistency in the corrected stiffness matrix which makes it always possible to interpret the stiffness elements with the corresponding physical configuration of the targeting structure. The scale factors are determined to minimize the objective function of eigen-properties. The proposed method was tested to determine the joint stiffness of a T shaped beam. The test results were also compared with the tuned stiffness obtained from a probed commercial package (SYSTUNE) and found that this method is very accurate and compatible.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.220-223
• /
• 2000

In this study for the development of a 3D pattern mill, we designed its layout which has high stiffness and low-weight structure. We calculated the load of each axis component when 3D pattern mill is under the worst cutting conditions. On base of the calculations, we determined the size of its structure and selected main components of the machine. Also, using FEM we analyzed the layout design of 3D pattern mill to reduce the wcight of structure and increase stiffness of it. According to the load position and direction, shapes and values of the deformation and the stress distributions are calculated, also we calculated the natural frequencies and mode shapes in order ta modify and redesign the weak parts

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1087-1090
• /
• 2003

In this study, experimental procedures were suggested to investigate the sloshing behavior of a liquid storage tank subjected to inevitably external vibrating conditions. For this purpose. liquid storage tank with rectangular cross section was made of an acrylic resin for the visualization of liquid fluctuation. A specially designed vibrator was used to provide a specified vibrating condition to the liquid storage tank. Extrapolation technique was applied to determine sloshing natural frequency by using various sloshing frequencies at each vibrating displacement and liquid contents at a fixed vibrating frequency. Sloshing mode was also determined from continuous images or liquid fluctuation captured from a video camera. In addition, change in the height of the liquid free surface was measured by using a floating target and a laser displacement sensor. It is found that the suggested method can be applicable to identify the sloshing behavior of liquid storage tank with rectangular cross section.

• 한국공작기계학회논문집
• /
• 제13권1호
• /
• pp.81-87
• /
• 2004

A 3-D FEM (Finite Element Method) analysis of the turbo-blower shaft attached to a fuel cell was performed using Lanczos algorithm. The modal analysis was analyzed in order to investigate natural frequency and maximum displacement for 10 times. It was found that the first mode of natural frequency is 109.1Hz with the maximum displacement of 0.16mm while the tenth mode of natural frequency is 2464Hz with the maximum displacement of 0.25mm. Consequently, the results of modal analysis of the turbo-blower for a fuel cell system show good dynamic responses.

• 한국구조물진단유지관리공학회 논문집
• /
• 제3권4호
• /
• pp.205-214
• /
• 1999

구조물의 동특성(고유진동수, 감쇠, 모드형상 등)의 변화는 구조물의 안전도를 평가할 수 있는 한 방법이다. 본 연구에서 콘크리트 세그먼트의 웨브 부분에 상당히 많은 균열이 진전되고 있는 상태의 Post-Tensioned Segmental 콘크리트 교량의 안전도 평가를 시도하였다. 안전도 평가를 위한 근간 데이터로 1986년 측정했던 데이터와 2차원 유한요소해석에서 얻은 결과값을 사용했다. 손상의 정도와 손상의 위치를 보다 정확히 찾아내기 위한 기술 중의 한 방법으로 Modal Test를 이용하였다. 이 방법이 Post-Tensioned Segmental 콘크리트 교량에 적용되어 교량의 안전도를 분석 평가하였다.

• 대한기계학회논문집A
• /
• 제33권7호
• /
• pp.700-705
• /
• 2009

In order to enhance the dynamic stiffness of automotive panel, effect of bead and curved surface was investigated. Modal test was performed for principle specimens which have various kinds of beads, holes and curved surfaces. Test was also performed for conventional dash panel assembly and rear floor panel assembly and curved shaped ones. Results showed that curved shape increased the natural frequency of automotive panel more effectively than the bead. Finite element analysis was also performed and yielded good match with the test results.