• Journal of Welding and Joining
• /
• v.22 no.4
• /
• pp.1-3
• /
• 2004

용접변형은 용접잔류응력과 같이 고유변형도에 의해 발생되며, 고유변형도의 분포형상에 따라 그림 1과 같은 용접변형이 발생된다. 이러한 용접변형은 강구조물 제작시 다양한 용접부형상에 의해 복합적으로 발생되며, 이것은 강구조물을 설계치수를 변화시키거나 부재 간 단차를 발생시켜 절단 또는 교정과 같은 생산공정에 불필요한 작업을 유발시켜 생산성을 저하시킨다.(중략)

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.6
• /
• pp.2470-2476
• /
• 2011

Inherent strain method, a hybrid method of experimental and numerical, is known to be very efficient in predicting the plate deformation due to line heating. For the simulation of deformation using inherent strain method, it is important to determine the magnitude and the region of inherent strain properly. Because the phase of steel transforms differently depending on the actual speed of cooling following line heating, it should be also considered in determining the inherent strain. A heat transfer analysis method including the effects of impinging water jet, film boiling, and radiation is proposed to simulate the water cooling process widely used in shipyards. From the above simulation it is possible to obtain the actual speed of cooling and volume percentage of each phase in the inherent strain region of a line heated steel plate. Based on the material properties calculated from the volume percentage of each phase, it should be possible to predict the plate deformations due to line heating with better precision.

• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.2
• /
• pp.127-136
• /
• 2000

Welding deformations reduce the accuracy of ship hull blocks and decrease the productivity due to correction work. Preparing an error-minimizing guide at the design stage will lead to a high quality as well as high productivity. And a precise method to predict the weld deformation is an essential part of it. This paper proposes an efficient method to predict complicated weld deformations based on the inherent strain theory combined with the finite element method. The inherent strain is determined by the highest temperature and the degree of restraint. In order to calculate the inherent strain exactly, it is considered that the degree of restraint becomes different according to the fabrication stages in real structures. A simulation of a stiffened plate shows the applicability of this method to simple ship hull blocks.

• Journal of the Society of Naval Architects of Korea
• /
• v.39 no.1
• /
• pp.82-89
• /
• 2002

The inherent strain method is known to be very effective in predicting the plate deformation by line heating. Traditionally the inherent strain regions have been determined from the temperature distribution and the phase transformation regions(Ac3) of welding experiments. Since the phenomena of line heating are similar to those of welding, the experimental results under the same welding conditions have been applied directly to line heating analysis. The results cannot, however, reflect the effect of heating pattern and plate thickness. Besides, water-cooling in the actual heating process can alter the steel's phase to martensite and shear plastic deformation occurs during the transformation. In this study, the experimental measurement of temperature distribution was substituted with a transient heat transfer analysis using FEM so that we could obtain the temperature distribution according to heat flux models of the heating pass. In order to consider plastic strains occurring additionally under phase transformation, inherent strain regions were assumed to be limited to the eutectoid temperature(Ac1). Using the regions, plate deformations could be predicted to validate our method and the results were in good agreement with the experimental ones

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.56-56
• /
• 2011

본 연구에서는 파랑의 변형을 예측하는 방법 중 하나인 고유함수전개법을 이용하여 축대칭 형태의 지형 위를 통과하는 파랑의 소멸파 성분을 검토하였다. 기울기와 곡률이 변하는 지역에 고유함수 전개법을 적용하여 해석할 때 필요한 적절한 구간의 수와 소멸파 성분의 개수를 산정하였다. 고유함수전개법을 이용하여 파랑의 변화를 예측하는 연구는 Bremmer(1951)가 전자기파에 적용하면서 처음 제시한 후 Takano(1960)가 파랑 변형 연구에 적용하면서 본격적으로 진행되었다. 이밖에 Kirby and Dalymple(1983), Liu et al.(1992), Cho and Lee(2000), Bender and Dean(2003), 조용식과 이창훈(1998) 및 강규영 등(2007)에 의해 국내 외로 많은 연구가 진행되었다. 그러나 기존의 연구의 대부분이 연직 2차원 지형에 대하여 수행되어 왔다. 3차원 지형에 대한 고유함수전개법은 Bender and Dean(2005)에 의해 처음으로 시작되었다. 그러나 그들의 연구에서는 수렴해를 얻기 위한 구간 및 소멸파 개수에 관한 구체적인 검토가 이루어지지 않았다는 한계가 있다. 그러나 실제 해저 지역은 다양한 지형의 영향을 받게 된다. 따라서 본 연구에서는 축대칭 지형에 대하여 수렴해를 얻기 위해 구간을 나누어 해의 수렴성을 확인하여 적절한 구간의 수를 결정한 후 소멸파의 수를 변화시키면서 소멸파가 파랑의 변형에 미치는 영향을 검토하였다. 천해역 및 중간수심 영역을 구간의 수와 소멸파 성분의 수에 변화를 주면서 수렴성 검사를 한 결과, 천해 영역에서는 소멸파 성분의 영향이 적게 나타났으나 중간수심 영역에서는 적절한 개수의 소멸파를 고려해야 보다 정확한 예측을 할 수 있음을 알 수 있었다.

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10c
• /
• pp.207-209
• /
• 1998

고유명사가 문장속에서 다시 언급될때는 여러 가지 변형된 형태로 나타난다. 즉 같은 의미의 이름으로 사용되면서 서로 다른 이름 형태를 갖게 된다. 이러한 경향은 coreference 처리를 어렵게 만든다. 본 논문에서는 고유명사의 coreference와 의미상으로 인식되지 않은 고유명사의 식별에 이용될 수 있는 효율적인 자료구조를 제시한다.

• Journal of Korean Society of Steel Construction
• /
• v.9 no.4 s.33
• /
• pp.467-477
• /
• 1997

A series of experimental tests have been performed on a tube beam in which artificial damage is applied in order to address damage detectability using modal analysis. Modal parameters considered are frequency, displacement mode shape and strain mode shape CoMAC(Coordinate Modal Assurance Criterion) and Modal Vector Error have been adopted for presenting the change of displacement mode shape and strain mode shape. It is revealed strain mode shape is the most sensitive to damage.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.21 no.2
• /
• pp.91-107
• /
• 2009

In order to compute linear wave transformation over a single step bottom, both variational approximation and eigenfunction expansion method are used. Both numerical results are in good agreement for reflection and transmission coefficients, surface displacement respectively. However x velocity profiles at the boundary of step are seen to be different to each other even though x velocity matching condition is used.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.1181-1184
• /
• 2007

The differential equations governing free, in-plane vibrations of linearly elastic circular arches with rotationally flexible supports, including the effects of rotatory inertia, shear deformation and axial deformation, are solved numerically using the corresponding boundary conditions. The lowest four natural frequencies and the corresponding mode shapes are obtained over a range of non-dimensional system parameters: the subtended angle, the slenderness ratio, and the rotational spring stiffness.

• Journal of Korean Society of Steel Construction
• /
• v.9 no.4 s.33
• /
• pp.673-682
• /
• 1997

The main purpose of this paper is to investigate the effects of rotatory inertia and shear deformation on the natural frequencies of arches with variable curvature. The differential equations are derived for the in-plane free vibration of linearly elastic arches of uniform stiffness and constant mass per unit length. The governing equations are solved numerically for parabolic, circular and elliptic geometries with hinged-hinged, hinged-clamped and clamped-clamped end constraints. For each cases, the four lowest frequency parameters are presented as functions of the two dimensionless system parameters; the arch rise to span length ratio, and the slenderness ratio.