• Proceedings of the Korean Information Science Society Conference
• /
• 2010.06b
• /
• pp.313-317
• /
• 2010

최근에는 반도체 공정 기술의 발달로 인하여 프로세서의 성능은 급속도록 발전하였다. 하지만 프로세서에서 소모되는 전력이 급속도록 증가하고, 이에 따라 발생된 높은 온도는 프로세서 신뢰성에 부정적인 영향을 미치고 있다. 그러므로 최근의 프로세서 설계 시 전력, 온도등도 성능과 함께 중요한 고려사항이다. 프로세서의 신뢰성에 치명적인 영향을 미치는 고온현상을 해결하기 위해서 여러 가지 연구가 이루어지고 있다. 대표적으로 방열 판, 냉각 팬 등을 이용한 기계적인 기법과 동적 온도 관리 기법, 연산 이관 기법등을 적용한 구조적인 기법이 활발하게 연구되고 있다. 이러한 기법들의 적용으로 프로세서의 온도를 효과적으로 제어할 수 있게 되었으나 기계적인 냉각 기법은 냉각 효율성이 높지 않다는 단점이 존재하고, 구조적 설계 기법을 통한 냉각기법은 온도를 제어하기 위해 프로세서의 성능을 저하시키는 치명적인 단점이 존재하기 때문에 두 기법 모두 더 많은 연구가 필요하다. 최근의 프로세서 온도 제어 연구의 초점은 부가적인 장치를 통해 프로세서 내에서 발생 된 온도를 제어하는 기계적인 냉각 기법에서 프로세서 내에서 발생하는 온도를 효과적으로 제어하여 프로세서의 신뢰성과 냉각 비용을 절감할 수 있는 구조적 설계 기법으로 이동하고 있다. 본 논문에서는 연구의 초점이 이동하는 원인에 대해 분석하고자 고성능 프로세서에서의 기계적 냉각 기법의 냉각 효율성을 분석하고자 한다. 실험 결과, 온도를 제어하는 데 있어서 매우 높은 비용($1^{\circ}C$ 감소 당 최대 3.58W, 평균 3.36W)이 소모되는 것으로 나타났다. 향후에는 구조적인 설계 기법의 냉각 효율성을 분석하는 실험을 진행하고자 한다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.425.1-425.1
• /
• 2016

고온의 플라즈마를 긴 펄스 및 장시간 연속운전 유지기술 개발 및 연구를 위해서는 플라즈마는 더욱 가열되어야 하고, 고온 고밀도의 플즈마 상태를 유지시켜야 한다. 이러한 고성능 플라즈마 개발은 향후 핵융합 에너지의 상용화를 위한 절대필수적 기반기술이다. 현재 KSTAR 토카막에서는 플라즈마를 가열하기 위한 장치들 중 하나로서, 출력 6 MW 급의 중성입자빔을 입사하는 NBI (Neutral Beam Injection) 가열장치가 설치 운영 중에 있다. 이 NBI 가열장치는 진공환경에서 고온, 고압, 고전압 방전 및 수냉 등이 작동 및 운전되고 있기 때문에, 구성 부품 들의 미세한 구조적 결함에도 장치의 치명적 failed로 이어질 수 있다. 이번 연구에서는 NBI 가열장치의 특성상 극한 운전 환경에 있는 진공용기 부품 중 하나 인 빔인출을 위한 가속 그리드 (accelerating grid)의 구조적 손상및 결함 여부를 고속중성자 이미지 기법을 적용하여 내부를 투시 진단하였다. 가속 그리드는 copper로 제작되었고, 빔인출을 위한 원형의 구멍과 냉각관을 가진 평면판 형태로 되었다. 본 연구에서 내부투시 및 진단할 수 있는 고속중성자 이미징 기법의 적용으로 진공용기 부품 및 장치의 구조적 결함 및 손상 여부를 판단 가능하다는 연구 결과를 얻었다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.23 no.5
• /
• pp.246-254
• /
• 2013

Translucent opal glass was fabricated in order to substitute polycarbonate diffuser of LED lighting for the purpose of improving the durability problem. Calcium phosphate was used for the opacifier of opal glass and melted at $1550^{\circ}C$ for 2 hrs in electric furnace. Because opal glass was made by phase separation and growth of opacifier grains during cooling procedure after forming of melted glass, we identified the effect of opaque properties by the change of forming and cooling temperature, as R.T. (room temperature), $850^{\circ}C$, $1100^{\circ}C$ and $1200^{\circ}C$. As the results, it had excellent optical properties for the diffuser of LED lighting in the fabricated sample of forming and cooling at $1200^{\circ}C$, with no dazzling from direct light by high haze value over 82 % and low parallel transmittance value under 10 %. For the thermal properties, it had expressed thermal expansion coefficient of $6.352{\times}10^{-6}/^{\circ}C$ and softening point of $839^{\circ}C$.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.33 no.1
• /
• pp.17-27
• /
• 2009

Water jet impingement cooling is used to remove heat from high-temperature surfaces such as hot steel plates in the steel manufacturing process (thermo-mechanical cooling process; TMCP). In those processes, uniform cooling is the most critical factor to ensure high strength steel and good quality. In this study, experiments are performed to measure the heat transfer coefficient together with the inverse heat conduction problem (IHCP) analysis for a plate cooled by planar water jet. In the inverse heat transfer analysis, spatial and temporal variations of heat transfer coefficient, with no information regarding its functional form, are determined by employing the conjugate gradient method with an adjoint problem. To estimate the two dimensional distribution of heat transfer coefficient and heat flux for planar waterjet cooling, eight thermo-couple are installed inside the plate. The results show that heat transfer coefficient is approximately uniform in the span-wise direction in the early stage of cooling. In the later stage where the forced-convection effect is important, the heat transfer coefficient becomes larger in the edge region. The surface temperature vs. heat flux characteristics are also investigated for the entire boiling regimes. In addition, the heat transfer rate for the two different plate geometries are compared at the same Reynolds number.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.05b
• /
• pp.387-388
• /
• 2003

습식 배연탈황 공정에서는 흡수탑 내에서의 황산화물 흡수율을 높일 목적으로 흡수탑으로 유입되는 배기가스를 약 5$0^{\circ}C$까지 냉각하고, 처리된 배기가스는 연돌에서의 자연 통풍력을 확보하고 연돌 배출 후 수분의 응축으로 인한 백연(white Plume)의 문제를 방지하고자 통상 9$0^{\circ}C$ 이상으로 가온하는 것이 일반적이며 이를 위해 다양한 형식의 열교환기가 설치 운영되고 있다. 탈황공정에서 흔히 GGH(gas to gas heater)라 불리는 Ljungstrom 방식의 열 교환기는 미처리된 고온가스와 처리된 저온 가스가 회전하는 열교환소자로 이루어진 영역을 지나면서 열 교환이 이루어지는 형태로 회전 부위 및 두 가스흐름의 구분 판(sector plate) 등에서 필연적으로 처리가스 흐름 중으로 미처리 가스의 누입이 일어나게 된다. (중략)

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.616-622
• /
• 2016

The heating load using solar hot water is lower in summer than in the other seasons. This decreased heating load leads to the overheating solar collectors and related components. To prevent overheating of the solar collectors, air cooling and shading shields were used. On the other hand, it requires additional mechanical components, and reduces the system reliability. The geothermal heat dump system to release the high temperature heat (over $150^{\circ}C$) transferred from the heat pipe solar collectors was investigated in the present study. Research on the heat dump to cool the solar collector is rare. Therefore, the present study was carried out to collect possible data of a geothermal heat dump to cool the solar collector. A helical type geothermal heat exchanger was buried at a 1.2m depth. Experimentally and numerically, the geothermal heat dump was investigated in terms of the effects of parameters, such as the quantity of solar radiation, aperture area of the collector and the mass flow rate. A pipe length of 50m on the geothermal heat exchanger was suitable with a 0.33 kg/s flow rate. The water reservoir was a possible co-operation solution linked to the geothermal heat exchanger.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.1
• /
• pp.81-94
• /
• 1988

A series of experiments was performed in this study to investigate the boiling heat flux between an impinging water jet and a hot surface. Test variables were surface roughness, jet velocity, saturation temperature excess of surface, nozzle diameter and the gap distance between nozzle plate and the hot surface. In order to make the impinged cooling water a forced flow streaming a long the hot surface immediately after the initial impingement, the flat nozzle tip was extended to a circular flat plate having the same diameter as the hot surface. Utilizing the dimensionless parameter study on continuity, momentum and energy equations, 5 groups of variables involved in the nucleate boiling heat transfer were derived so that it is possible to estimate the increased heat flux by impinging water jet in a similar experimental work. For the case of saturated water being impinging onto a high temperature surface, an applicable correlation among dimensionless parameters describing the heat flux was found to be as follow.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.6
• /
• pp.1754-1759
• /
• 2008

To produce plastic parts that have fine pattern through conventional injection molding, a lot of difficulties follow. Therefore, rapid heating and cooling methods are good candidates for manufacturing injection-molded parts with micro/nano patterns. In this study, we adopted the E-Mold patent technology. The mold for E-Mold technology has a separate heated core with micro heaters. It is very important to optimize the lay-out of the heaters in heated core because it influences both control and distribution of mold temperature. We developed a optimization method of heating line lay-out by using commercial softwares and compared the output with the experimental results. We used Pro-Engineer Wildfire 2.0 for the mold design, ICEMCFD for mesh generation, and FLUENT for heat transfer simulation. The simulation results showed the temperature profile from $60^{\circ}C$ to $120^{\circ}C$ or $180^{\circ}C$ during heating and cooling process which were compared with the injection molding experiments. We concluded that the simulation could well explain the experimental results. It was shown that the E-Mold optimization design for heater lay-out could be available through the simulation.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.7 no.3
• /
• pp.384-392
• /
• 1997

Potassium lithium niobate(KLN) single crystal for a nonlinear-optic material, which changes the wavelength of lasers, has a ferroelectric tetragonal tungsten bronze structure at room temperature. It has been very hard to get single crystals of good quality due to the cracks during cooling process. In order to investigate the composition change due to the evaporation of solution during the growth, the thermogravimetric analysis was carried out. In atmospheric condition at $1000^{\circ}C$ which is about $10^{\circ}C$ higher than the crystal growing temperature, the weight change was negligible amount of $1.46{\times}10^{-5}$g/($\textrm{cm}^2$hr). By using both the Pt plate as the nucleation site and the slow cooling method with temperature fluctuation, KLN single crystal of good quality of size 1 cm could be obtained. The phase transition temperature was $490^{\circ}C$, which was higher than that reported by other researchers of the other composition. The optical anisotropy due to the absorption of OH-band exists in the range of IR.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.2
• /
• pp.5-12
• /
• 2000

Uncooled metallic thin-film thermopile infrared detectors have been fabricated, and the figures of merit for the detectors were examined. The hot junctions of a thermopile were prepared on a $Si_{3}N_{4}/SiO_{2}/Si_{3}N_{4}$-membrane which acts as a thermal isolation layer, the cold junctions on the membrane supported with the silicon rim which functions as a heat sink, and Au-black was used as an infrared absorber. Infrared absorbance of Au-black, which strongly depends on the chamber pressure during Au-evaporation and its mass per area, was found to be about 90 ％ in the wavelength range from 3${\mu}{\textrm}{m}$ to 14${\mu}{\textrm}{m}$. Voltage responsivity, noise equivalent power, and specific detectivity of Bi-Sb thermopile infrared detector at 5 Hz-chopping frequency were about 10.5V/W, 2.3 nW/Hz$^{1/2}$, 및 $1.9\times10^{7}$ cm.Hz$^{1/2}$/w at room temperature in air, respectively.