• Korean Journal of Agricultural Science
• /
• v.12 no.2
• /
• pp.199-205
• /
• 1985

1. Alternaria tenuis, Cladosporium cladosporioides, Curvularia lunata Fusarium semitectum, Gerlachia oryzae, Phoma sp. Trichoconiella padwickii were found associated with ear blighting of rice plants. The frequency of isolation of the fungi was found to be higher from the severely discolored rice grains than that from the brownish spotted grains, but H. oryzae was encounted highly from the latter. 2. Higher counts of Alternaria tenuis, Helminthosporium oryzae, Trichoconiella padwickii, Fusarium moniliforme, Fusarium semitectum were observed under alternating cycles of 12hrs of light and darkness than under complete darkness but G. oryzae was encountered highly under darkness in the blotter. While no difference in the occurrence of the other fungi was recorded under l2hr NUV light-12hr darkness cycles and darkness. 3. A. tenuis and C. cladosporioides were encountered highly at the lower temp. $(15^{\circ}C)$ but Phoma sp. was occurred highly at the higher temp. $(30^{\circ}C)$ when the seeds were incubated in the blotter. 4. Artificial inoculation of the fungi in the ears of rice plants caused severe discoloration of rice grains and reduced 1,000 grain weights and grain ripening percentage.

• Journal of the Korean Ceramic Society
• /
• v.40 no.5
• /
• pp.447-454
• /
• 2003

Samples were prepared by the solid-state reaction method. The nominal composition of the samples was B $i_{1.84}$P $b_{0.34}$S $r_{1.91}$C $a_{2.03}$C $u_{3.06}$ $O_{10+{delta}$ prepared from powder of B $i_2$ $O_3$, PbO, SrC $O_3$, CaC $O_3$, and CuO. They were pulverized, mixed with AgO, A $u_2$ $O_3$and MgO of 50 wt%. Finally, they were sintered at 820 to 85$0^{\circ}C$ in air. The structural characteristics, the microstructure of surface and the critical temperature with respect to the each samples were analyzed by XRD, $T_{c}$, SEM and EDS respectively. It was found that the the critical temperature of the silver oxide additive samples (99.58 K) is higher than those of gold or magnesium oxides additive samples, but all those values are lower than that of pure Bi-2223 phase. The microstructure of surface showed the tendency which the AgO additive samples become more minuteness than A $u_2$ $O_3$ and MgO additive samples.s.samples.s.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.2
• /
• pp.68-72
• /
• 2002

The $\beta$-$FeSi_2$ and $\alpha$-$FeSi_2$ single crystals were synthesized by chemical vapour transport (CVT) using iodine as a transporting agent from the commercially available $FeSi_2$ powder. The $FeSi_2$ powder together with iodine were sealed in an evacuated quartz ampoule and the ampoule then being placed in two-zone electrical furnace for growing crystal. The CVT of $FeSi_2$ with iodine yielded $\beta$-$FeSi_2$ and $\alpha$-FeSi$_2$ single crystals at deposition temperature of 750 and $950^{\circ}C$ respectively. The source temperature was $1050^{\circ}C$ in both cases. The crystals of the $\alpha$-FeSi$_2$ phase were typically plate shaped with dimensions of about $10\times 10 \textrm{mm}^2$, whereas the crystals of orthorhombic $\beta$-$FeSi_2$ phase grew predominantly in the fonts of thin needle of about 10 mm in length. The composition of$\alpha$-FeSicrystal determined by electron probe microanalysis (EPMA) resulted in Si-rich $FeSi_{2.58}$ . 57. Furthermore, the CVT $\beta$-$FeSi_2$ crystal was found to be transformed to the high temperature $\alpha$-$FeSi_2$phase above $930^{\circ}C$.

• Journal of Energy Engineering
• /
• v.11 no.2
• /
• pp.114-121
• /
• 2002

Alkali metal compounds existed in original coal or sorbents are exhausted as vapor or small particle at the outlet of combustor when operating PFBC power plant. These compounds can be removed with dust removal equipment, but total generation efficiency will be decreased because of lower operating temperature of dust removal equipment. Alkali metal contained in vapor phase is initially deposited onto turbine blade results in serious corrosion. The concentration of alkali vapor in the PFBC flue gas is 20∼40 ppm which is dependent on mineral characteristics and composition as well as operating condition of PFBC. However, the allowance limit of alkali metal vapor is assigned as less than 50 ppb for gas turbine when coal or oil is used as fuel. Therefore, alkali metal vapor in PFBC or IGCC process should be removed by solid sorbents to prevent corrosion of turbine blade and improve plant efficiency. In the present investigation, powder of Bauxite, Kaolinite and Limestone is used in the preparation of cylinder-type pellet which is inserted into the pressurized alkali removal reactor for the alkali absorption experiment. Experimental results showed that the alkali removal efficiency in the order of Bauxite, Kaolinite and Limestone. Alkali vapor removal efficiency is related with reaction temperature, porosity of pellet and alkali vapor concentration of flue gas.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.46 no.3
• /
• pp.165-169
• /
• 2001

Seed coat of sword bean (Canavalia gladiata) is very thick and hard, it is difficult to absorb water during germination and it requires much time that cotyledon come out from seed coat since seminal root appearanced. Therefore this experiment was carried out to increase the germination rate by easing water absorption through mechanical scarification on seed coat. Non-scarification seed did not germinated at 7 days after treatment but scarification seed showed germination rate of 98%. Therefore mechanical scarification of seed coat was increased germination rate. Non-scarification seed absorbed less than 10% water of dry weight at 8 hours after treatment but scarification seed absorbed about 90% water at 7 hours after treatment and more than 150% water at 8 hours and swelled about 1.4-1.5 times in length and width of seed. Germination rate of scarification seed was high under high temperature and it was 96% and 93% at $25^{\circ}C$ and 3$0^{\circ}C$, respectively. The rate of cotyledon emergence on clay loam soil was the highest among bed soils. Soaked seed after mechanical scarification in distilled water was germinated faster than non-soaked seed on early in bed soil. The rate of cotyledon emergence was more than 92% at 9 days after sowing but non-scarification and soaked seed was germinated late and showed very low germination rate as 67%.

• Economic and Environmental Geology
• /
• v.50 no.2
• /
• pp.105-116
• /
• 2017

The purpose of this study is to provide the information on genesis of obsidian occurring in the southwestern part of Ulleung Island, Korea, and to discuss its implications for volcanic activity through volcanological and mineralogical properties of obsidian. Obsidian occurs locally at the lower part of the Gombawi welded tuff, showing various complex textures and flow banding. Though obsidian is mostly homogeneous, it is closely associated with alkali feldspar phenocrysts, reddish tuff, and greyish trachyte fragments. The obsidian occurs as wavy, lenticular blocks or lamination composed of fragments. Cooling fractures developed on obsidian glass are characterized by perlitic cracks, orbicular or spherical cracks, indicating that obsidian rapidly quenched to form an amorphous silica-rich phase. It is evident that hydration took place preferentially at the outer rim relative to the core of obsidian, forming alteration rinds. The glassy matrix of obsidian includes euhedral alkali feldspars, diopside, biotite, ilmenite, and iron oxides. Microlites in glassy obsidian are composed mainly of alkali feldspars and ilmenite. Quantitative analysis by EPMA on the obsidian glass part shows trachytic composition with high iron content of 3 wt.%. Accordingly, obsidian formed with complex textures under a rapid cooling condition on surface ground, with slight rheomorphism. Such results might be induced by collapse of lava dome or caldera, which produced the block-and-ash flow deposit and the transportation into valley while keeping high temperatures.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.15 no.4
• /
• pp.343-353
• /
• 2017

Processing and equipment were tailored for engineering scale fabrication of $UO_2$ porous pellets, a feed material for the electrolytic reduction process in the PRIDE (PyRoprocessing Integrated DEmonstration) facility at KAERI (Korea Atomic Energy Research Institute). The starting materials, $UO_2$ powder and pre-milled surrogate oxide powders, were proportioned to simulate the chemical composition of spent fuel (so-called Simfuel). The Simfuel powders were homogenized by mixing, compacted into a pellet shape, and finally heat treated using a tumbling mixer, rotary press, and sintering furnace. After sintering at $1450^{\circ}C$ for 24 h in $4%\;H_2-Ar$, the average bulk density of the $UO_2$ Simfuel pellets was $6.89g{\cdot}cm^{-3}$, which meets the standard of the following electrolytic reduction process. In addition, the results of a microstructural analysis demonstrated that the sintered Simfuel $UO_2$ porous pellets accurately simulate the properties of spent fuel in terms of the formation of second phases. These results provide essential information for the massive fabrication of $UO_2$ porous pellets for engineering scale pyroprocessing research.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.22 no.1
• /
• pp.19-24
• /
• 2012

Barium zirconate exhibits good thermo-chemical stability and proton conduction at high temperatures, but shows poor electron conductivity. Therefore, for high efficiency of hydrogen separation, a very thin and dense Pd-Barium zirconate membrane has to be coated on a porous substrate. A thin and dense Pd-Barium zirconate membrane was successfully synthesized on a porous substrate by means of dual sputtering method. The structural and chemical features of the $BaZr_{0.85}Y_{0.15}O_{3-{\delta}}$ membranes sputtered at $300^{\circ}C$ and $400^{\circ}C$ were investigated by X-ray diffractometry, and it was found that a well-crystallized membrane, Pm-3m space group of $BaZrO_3$, was synthesized. The surface and cross-sectional morphologies of membrane were assessed by SEM (scanning electron microscopy) and TEM(transmission electron microscopy) of the surface and of cross sections. The cross sectional observation of Pd-$BaZr_{0.85}Y_{0.15}O_{3-{\delta}}$ membrane by dual sputtering shows that the coating is quite dense with columnar structure.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.26 no.5
• /
• pp.297-305
• /
• 2006

The thermal ratcheting deformation at the reactor baffle and upper internal structure of the liquid metal reactor (LMR) can occur due to movement of the hot sodium free surface. In in-service inspection of reactor internals of LMR, a new inspection technique should be developed for the detection of the thermal ratcheting damage. In this study, an inspection technique using ultrasonic guided wave is proposed for the detection of the thermal ratcheting damage of cylindrical vessels. A 316L stainless steel cylindrical shell specimen has been prepared. The thermal ratchet structural tests were cyclically performed by heat-up up to $550^{\circ}C$ with steep temperature gradients along the axial direction after cool-down by cooling water. Ultrasonic guided wave propagation has been characterized by analysis of dispersion curve of the stainless steel plate. The zero-order antisymmetric $A_0$ guided wave has been selected as the optimal mode for detection of the ratcheting deformation. It is confirmed that the thermal ratcheting deformation can be detected by the measurement of transit time difference of circumferentially propagated $A_0$ guided waves.

• Applied Microscopy
• /
• v.25 no.4
• /
• pp.124-131
• /
• 1995

High resolution transmission electron microscopic observations on the $Hg_{1-x}\;Tl_{x}\;Ba_{2}(Ca_{0.86}\;Sr_{0.14})_{2}\;Cu_{3}\;O_{8+\delta}$(x=0.00, 0.25, 0.50, 0.75) were carried out using side-entry type TEM working at 300 kV. The TEM samples are prepared by powder method. The pellets are crushed in agatar motar and suspended in $CCl_4$, solution and scooped in holely carbon microgrid. The 1223 structures are observed in all samples with [010] zone axis. Except x=0.25 sample, the lattice parameter a and c tend to decrease as the thallium contents are increased ranging from 0.3936 nm to 0.3713 nm for a, and from 1.6131 nm to 1.5138 nm for c parameter. Those of x=0.25 sample are reduced too much, 0.3785 nm for a, 1.5375 nm for c. The sample with x=0.25 shows the intergrowth of 1223 and 1234 structure with the ratio of 19 to 1. As the thallium content increases, the structures become more stable without having any defect. The samples are damaged by electron beam irradiation during the observation, however the structure can endure longer as the thallium contents are increased.