• Korean Journal of Food Science and Technology
• /
• v.32 no.6
• /
• pp.1326-1330
• /
• 2000

Kimchi, made from seasonal baechu (Chinese cabbage), was sealed in PP trays with a Nylon/CPP lid film and stored at various temperatures (0, 10, $20^{\circ}C$) to investigate the feasibility of detecting its fermentation degree by measuring gas composition inside the packages. The gas composition inside the kimchi package continuously changed due to $CO_2$ evolution during fermentation. Regardless of temperature, the fermentative gas accumulation in the package caused $CO_2$ concentration to increase by two-stepwise pattern, but $O_2$ concentration to decrease exponentially. As $CO_2$ concentration increased secondarily, the pH values of kimchi decreased proportionally (r>0.968). The production of $CO_2$ during kimchi fermentation was stimulated at higher temperatures and affected by seasonal factor. Kimchi made from winter baechu produced more fermentative gas than that from summer baechu. It was suggested that the changes in $CO_2$ concentration could be used as a characteristic index for indicating the fermentation course of packaged kimchi products.

• Journal of the Korean Society for Heat Treatment
• /
• v.29 no.5
• /
• pp.227-233
• /
• 2016

Phase transformation phenomenon at high temperature was investigated by using designed TiAl-Nb alloys with addition of the ${\beta}$ stabilizer. Examination of dendritic morphologies in arc-melted button ingot could reveal the crystallography of the primary solidification phase. It was found that the addition of ${\beta}$ stabilizer(Nb) shifted the high temperature region of the binary Ti-Al phase diagram to the high Al composition side so that ${\beta}$ phase forms as a primary crystal even at higher Al composition compared with the binary Ti-Al system. The ${\beta}$ was found to be the primary solidification phase for alloys with Al content less than about 52 at.%. The composition of ${\beta}$ solidification in Ti-Al-Nb ternary system could be determined from the partial liquidus projection which was constructed by observing the microstructure of arc-melted buttons. The Ti-46Al-(6, 8)Nb composition was selected for ${\beta}$ solidification and the directional solidification was performed by a floating zone-type DS apparatus at the growth rate 30 mm/hr respectively.

• Journal of the Korean Institute of Gas
• /
• v.2 no.3
• /
• pp.25-36
• /
• 1998

Explosion and fires can occur in all segments of chemical and petroleum industries because of complexity of process, usage and storage of flammable and reactive chemicals, and operating conditions of high pressure and temperatures. Especially chemical plants have high possibility of the occurrence of BLEVE(Boiling Liquid Expanding Vapor Explosion)and Fireball. In this study, a computer program was developed for the effect assessment of BLEVE and Fireball. BLEVE was analysed by three explosion models of physical explosion model, isothermal expansion model and adiabatic expansion model and Fireball using solid model. The parametric sensitivity analysis has been done for the models of BLEVE and Fireball. The damage by BLEVE and Fireball of Benzene and Toluene and m-Xylene were estimated.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.5
• /
• pp.917-920
• /
• 2004

The migration potential of volatile organic solvents widely employed in the printing process of food packaging was investigated by using a closed experimental system, which contained a food sample and a paper sheet spiked with the contaminant solvents. The studied organic compounds included toluene and p,m,o-xylene which are relatively highly volatile. Typical food samples of caramel, beef jerky and butter were selected based on their chemical composition and were assigned to the migration system at 10, 25 and 4$0^{\circ}C$. The equilibrated migration level was very high with almost complete transfer in the butter with high fat, while caramel of high carbohydrate content and beef jerky of high protein showed migration degree of 37∼56% and 37∼77%, respectively. Temperature did significantly influence the migration on beef jerky with higher level at higher temperature. There was no difference in the migration level among the solvents.

• Korean Journal of Metals and Materials
• /
• v.56 no.11
• /
• pp.779-786
• /
• 2018

There have been previous attempts to observe the occurrence of dynamic ferritic transformation at temperatures even above $Ae_3$ in a low-carbon steel, and not only in steels, but recently also in titanium alloys. In this study, a new approach is proposed that involves treating true stress-true strain curves in uniaxial compression tests at various temperatures, and different strain rates in 0.1C-6Ni steel, which is a model alloy used to decelerate the kinetics of ferrite transformation from austenite. The initial flow stress up to peak stress was used to analyze the change in dynamic softening phenomena, such as dynamic recovery, dynamic recrystallization, and dynamic transformation. It is worth mentioning that for predicting the occurrence of dynamic transformation, flow stress before reaching peak stress is much more sensitive to the change in the dynamic softening rate due to dynamic transformation, compared to peak stress. It was found that the occurrence of dynamic ferritic transformation could be successfully obtained even at temperatures above $Ae_3$ once the deformation condition was satisfied. This deformation condition is a function of both the strain rate and the deformation temperature, which can be described as the Zener - Hollomon parameter. In addition, the driving force of dynamic ferritic transformation might be much less than that of the dynamic recrystallization of austenite at a given deformation condition. By applying this technique, it is possible to predict the occurrence of dynamic transformation more sensitively compared with the previous analysis method using peak stress during deformation.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.131-131
• /
• 2019

최근 기후변화와 여름철 고온 등으로 인한 녹조현상, 각종 사고로 인한 화학물질 및 유류 유출 등 수질오염과 관련된 사회적 관심이 높아지고 있다. 특히, 화학사고로 인한 유해화학물질 유출은 접촉시 인체에 악영향을 끼치며, 대기 수질 토양을 오염시키고 주변 농작물의 변색이나 괴사를 유발하는 등 발생 시 적절한 조치와 대응이 필요하다. 환경부에서는 유해화학물질 유출사고로 인한 국민건강 및 환경상의 위해를 예방하기 위해 화학물질관리법과 화학물질 등록 및 평가에 관한 법률을 제정하여 유해화학물질을 관리하고 사고에 대응하고 있다. 그러나, 화학사고 발생 시 현장인력에 의존해 공장 인근의 먼지, 악취 등을 감시하거나 화학물질의 유출이 우려되는 곳에 제한적으로 검출센서를 설치해 사고를 감시하고 있으나 미설치 지역에 대한 능동적 탐지가 어렵고, 공간적 분포 탐지가 불가능하여 초동 대응에 한계가 있다. 한편 최근 초분광 영상을 활용하여 물질 고유의 특성을 분석함으로써 토지피복, 식생, 수질 등의 식별에 활용되고 있어 화학물질 감지 가능성도 보여주고 있다. 하지만, 초분광 센서를 활용한 하천의 화학물질 감지를 위한 연구는 아직 미비한 실정이다. 이에 본 연구에서는 우선 유해화학물질의 일종인 황산, 염화티오닐, 톨루엔을 대상으로 지점 분광복사계로 촬영하여 각각의 화학물질이 갖는 분광특성을 수집하여 초분광 영상으로 상호 구분이 가능한 지 확인하고자 하였다. 이상치 검출 및 신뢰도 높은 자료를 구축하기 위해 다회 반복촬영하였으며 반사도의 표준화를 위해 백색판을 동시에 측정하고 이를 정규화하여 분광 라이브러리를 구축한 결과, 대상 화학물질 별 식별이 가능하다는 결과를 도출하였다. 이러한 가능성에 기반하여 추가적인 유해화학물질 분광 라이브러리 데이터베이스를 구축하면, 사고물질의 식별 및 농도를 즉각적으로 확인하고 실시간 모니터링에 적용하여 신속하게 화학사고 발생여부 감지 및 대응에 활용될 것으로 기대한다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.265-265
• /
• 2019

기후변화로 의한 기온의 상승은 가뭄, 홍수와 같은 재해를 일으킬 뿐만 아니라 깊은 호수나 저수지와 같은 수자원에도 용존 산소, 물질, 영양소 및 식물플랑크톤의 수직적 분포 등과 같은 다양한 부분에 영향을 미친다. 본 연구의 목적은 SWAT, HEC-ResSim 및 CE-QUAL-W2(이하 W2)모델을 사용하여 미래의 기후 변화에 따른 소양호의 수온, 성층강도 및 열적 안정성의 변화를 장기 예측하고 그 영향을 평가하는데 있다. W2 모델의 보정은 2005 년부터 2015 년까지의 실측 과거 데이터를 이용하여 보정하였고 기후변화 시나리오는 IPCC의 AR5 RCP 4.5 시나리오를 사용하였다. 기후자료는 GCM 모델인 HadGEM2-AO 결과를 상세화하여 모의기간의 자료를 생성하였다. SWAT모델을 이용하여 모의기간인 2016 년부터 2070 년까지 일단위로 저수지 유입을 예측했으며 HEC-ResSim모델을 이용하여 소양강댐 저수지 운영 조건에 따라 저수지 방류량 및 수위 변화를 모의하였다. 수온 해석을 위해 W2를 적용하여 저수지의 장기간의 수온 변화를 예측하였다. 결과적으로 대기 온도는 $0.0279^{\circ}C/year$(p < 0.05) 상승할 것으로 예측되었으며, 동일기간 상층(수면으로부터 5m 깊이)과 하층 (바닥으로부터 5m 높이) 수온은 각각 $0.0191^{\circ}C$/년(p < 0.05) 및 $0.008^{\circ}C$/년(p < 0.05) 상승할 것으로 예측되었다. 모의된 수온을 계절별로 분석했을 때 상층수온은 여름철 가장 큰 폭으로 상승하였으며 하층의 경우 겨울철에 가장 큰 폭으로 상승하였다. 계절별 상-하층 수온의 차는 여름이 가장 컸으며, 겨울에 온도차가 가장 작았다. 또한 미래 온도의 상승에 따라, 소양호의 성층 강도가 강해지는 경향을 보였으며 상층 및 하층의 온도차 $5^{\circ}C$를 기준으로 성층이 형성되는 기간은 큰 변동이 없었으나 소멸되는 시점이 점점 늦어지는 추세를 보여 성층 형성 기간이 길어지는 것으로 나타났다. 저수지 표면의 수온 상승은 식물플랑크톤의 계절 성장률에 영향을 미쳤는데, 특정 조건에서 규조류는 최적 성장 범위를 벗어나는 고온 조건에서 성장속도가 감소하였으나 녹조류와 남조류의 출현 시기가 빨라지며 장기화될 것으로 예측되었다.

• Korean Journal of Breeding Science
• /
• v.41 no.4
• /
• pp.507-509
• /
• 2009

New standard carnation cultivar "Jasujung" was bred from the cross of red standard cultivar "Francesco" and purple standard cultivar "Saturn" at the National Institute of Horticultural & Herbal Science. It was crossed in 1996 and finally selected in 2000 after investigation of the characteristics for 4 years from 1997 to 2000. "Jasujung", purple standard cultivar for cut flower, has good fragrance and long stem. Especially, it is strong resistance against Fusarium wilt. This cultivar is recommended to grow over $8^{\circ}C$ at night and under $25^{\circ}C$ at days.

• Applied Chemistry for Engineering
• /
• v.29 no.6
• /
• pp.734-739
• /
• 2018

We successfully coated poly(3,4-ethylenedioxythiophene) : poly(styrene sulfonate) (PEDOT : PSS) on CVD graphene by adding poly(vinyl alcohol) (PVA) to PEDOT : PSS. Extensive studies on the wettability of coating solutions and electrical properties of formed films led us to conclude that PVA with 89% of the degree of saponification and the molecular weight of less than $100,000gmol^{-1}$ produced optimum results. Furthermore, the optimum content of PVA was found to be 5% of PEDOT : PSS by the solid weight. The film coated by PEDOT : PSS with PVA on CVD graphene displayed a conspicuous improvement in the surface roughness, adhesive property, bending durability and stability in resistance at $160^{\circ}C$, compared to those of using CVD graphene films.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.6
• /
• pp.9-13
• /
• 2019

In this study, a miniature thin film-patterned heater was fabricated on a silicon substrate using semiconductor process technology and the thermal characteristics of the applied voltage, power, and temperature of the thin film heater were measured and analyzed. The temperature of the thin film pattern heater increased with increasing power, but the temperature increase rate was gradual at high power intervals. The characteristics of the high temperature section of the platinum thin film-patterned heater were analyzed using the heat resistance model under atmospheric and vacuum conditions. The thermal resistance measured in a vacuum atmosphere was 0.79 [K/mW] higher than the heat resistance value 0.69 [K/mW] in air. The temperature of the thin film pattern heater can be maintained at a low power in a vacuum rather than in air, and these results are expected to be utilized in the structural design of a thin film-patterned heater element.