• Korean Journal of Materials Research
• /
• v.7 no.9
• /
• pp.763-771
• /
• 1997

이규화몰리브덴 고온발열체의 제조공정을 개발하였다. 원료분말은 상용 MoSi$_{2}$분말이었으며 Bentonite, Si$_{3}$N$_{4}$, B, ThO$_{2}$를 각각 가소제와 첨가제로 사용하였다. 이들은 진공압출, 소결, 단자부 기계가공, U자형 성형, 용접 등의 과정을 거쳐 U자형 발열체로 제조되었다. 사용제품의 분석결과 최근 사용온도가 크게 증가된 것으로 알려진 190$0^{\circ}C$용 발열체는 다량(33wt%)의 W이 Mo을 치환하고 있는 것으로 나타났다. 발열체의 전기비저항은 겉보기 밀도가 증가함에 따라 급격하게 감소하는 경향을 보였으며 첨가물들의 영향은 미미하였다. 1400-1$600^{\circ}C$에서 용접한 경우 용접면에서의 전기비저항은 비용접부보다 낮았으며 용접온도가 증사함에 따라 감소하였다. 발열시험결과 제조된 발열체는 표면온도가 1$700^{\circ}C$이하에서는 문제가 없었으며 175$0^{\circ}C$ 이상의 온도에서는 원형의 융기가 표면에 발생하면서 급속하게 파괴되었다. 이 융기는 X-선 회절분석결과 SiO로 밝혀졌으며 따라서 발열체의 파괴는 MoSi$_{2}$/SiO$_{2}$계면에서의 Si(in MoSi$_{2}$) + SiO$_{2}$=2SiO(g)반응에 으해 일어나는 것으로 판단된다.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.3524-3528
• /
• 2007

In this study, the Peltier effect was applied to eliminate moistures in the air enclosed by a cabinet. We have developed the new electronic dehumidifier which has a new function of automatically evaporating the condensed water inner cabinet into the outside air. To obtain this function, the processes of dehumidification is that it condensed the moistures on the cold side heat sink and drained it into the hot side heat sink by the both gravitational and capillary forces and the droplets on the hot side heat sink surface was evaporated into the air outside the cabinet by the heat conducted through the hot side heat sink surface and the forced heat convection through the fan for cooling hot side heat sink. Compared to existing electronic dehumidifiers, this manufactured one showed a good performance that the electric power consumption for the same dehumidifying quantity was reduced by 50% compared with that of existing ones.

• Proceedings of the KAIS Fall Conference
• /
• 2008.11a
• /
• pp.184-187
• /
• 2008

본 논문에서는 유도가열방식을 이용한 과열증기 발생장치를 제안하였다. 발열방식은 외부의 가열코일로부터 특수 합금 발열체에 비접촉 상태로 전자유도 와전류를 구조체에 흐르게 하였다. 인버터는 스위칭주파수 20[kHz]대역에서 작동되는 풀-브릿지 고주파 직렬 부하 공진형이며, LC 공진 설계에서 부하자체를 L로 선정하여 효율을 최대화 하였다. 개발된 장치는 전자유도가열 발열체와 유체이동에 의한 새로운 열교환 방식으로 일체의 연소과정 없이 기체, 액체 및 증발체 등을 상온에서 500[$^{\circ}C$]이상의 고온에 이르기까지 고정도의 가열이 가능하여 작업환경 개선이 가능하다.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.2206-2207
• /
• 2008

본 논문에서는 분전반에서의 화재 위험 요소와 화재위험 요소에 대한 현장 실태조사 결과를 분석하였다. 분전반에서의 화재 위험 요소는 크게 전기적 요인, 환경적 요인, 물리적 요인으로 나눌 수 있으며 전기적 요인으로는 단락, 과부하(과전류), 접촉불량, 전류 불평형 등이 있으며 환경적 요인으로는 수분(염분 등), 먼지(분진, 목분, 철분 등), 온도(고온) 등에 의한 절연파괴, 기기 손상, 오동작 등이 있다. 물리적 요인으로는 기계적인 진동이나 충격 등에 의한 전기적 접속부의 이완에 의한 발열 등을 들 수 있다. 이러한 화재 위험 요인에 대하여 현장실태조사를 실시한 결과, 일부 분전반에서 내부에 먼지 등 이물질이 차단기, 전선, 단자대 등의 표면에 부착되어 있음을 확인할 수 있었으며 수분이나 염분 등의 영향으로 전극간 절연물 표면의 열화로 화재가 발생할 가능성이 있다. 또한, 적외선 열화상 분석결과, 일부 차단기 단자에서 국부 발열이 관측되었으며, 부하 분담의 불평형에 의한 발열도 확인되었다. 이러한 위험요인에 의한 화재 예방을 위하여 규정된 전선 굵기의 사용과 적정 체결압력의 확보, 상간 전류 불평형을 줄이기 위한 부하 분담의 조정이 필요하다. 향후, 분전반에서의 전기화재, 감전사고 등 전기재해의 예방을 위하여 지속적이고 체계적인 유지관리는 물론 사고 발생 전에 이상 징후를 사전에 감지하여 조치를 취할 수 있도록 하는 기술의 개발과 현장 적용이 요구된다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.4
• /
• pp.740-746
• /
• 2009

Two step serial load induction superheater has been proposed using resonance type induction heat method in this paper. Heat method is a type of flowing the electron induction and current to special alloy heater in body from external heat coil with non-contact method. Inverter was a full bridge serial load resonance type and inductor was used as load in LC resonance design to maximize the efficiency. The developed system is a new heat exchanging method combined with electromagnetic induction heater and fluid movement, ana very accurate to control of heating the gas, liquid and evaporated mass, so on without combustion process.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.5
• /
• pp.339-347
• /
• 2019

The power circuit design of an on-board S-band transmitter for KSLV-II with derating(operation of a component at less than its maximum rated specification to enhance reliability) is investigated. The power circuit of the transmitter consists of linear voltage regulators, DC/DC converters for regulating the DC supply, and diodes for reverse voltage protection. After analyzing the load current of the components, derating requirements are explored. Furthermore, power dissipation and junction temperature rise are considered with respect to the load current. The analysis is compared to the results from an engineering model of the transmitter. The temperature of the components is derated by >$40^{\circ}C$ in an environment where the ambient temperature is $+60^{\circ}C$, which is the acceptance test specification of high temperature.

• Journal of Welding and Joining
• /
• v.14 no.3
• /
• pp.12-19
• /
• 1996

Spot 용접의 역사는 1877년에 E. Thomson이 발명한 것이지만 1886년 처음으로 저항 용접기의 특허를 취득할 때까지는 거의 실용화 되지 못하였다. 그 후 Thomson의 전기 용접기 회사가 저항 용접의 특허를 거의 독점한 관계로 커다란 발전없이 spot 용접에 관한 특허 분쟁이 해소된 1920년 이후 보급되기 시작하여 1935년경 부터 증가 하였다. 초기에는 주로 맞대기 용접에 이용되고 전선의 접합이나 크게는 rail의 용접 에까지 이르렀다. 금세기에 들어와서부터 spot 용접이나 seam 용접이 실용화되고 관련 용접 장치도 개발되었다. Spot 용접은 자동차 공업과 더불어 크게 발전하였으며 오늘 날에는 spot 용접 생산의 약 2/3를 자동차 공업이 점유하고 있다. Spot 용접은 고온 압접의 일종으로 각종 압접 방법중에서 가장 많이 사용되고 있는 것이다. 접합하고저 하는 부분에 직접 고전류를 통하고 그 전류에 의한 저항 발열로 용접부의 온도를 상승 시켜 용접하는 것으로서 극히 짧은 시간에 용접이 가능하고 고속, 고능률이므로 특히 다량 생산에 적합하다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.6 no.2
• /
• pp.220-228
• /
• 1996

CdTe single crystals were grown by vertical Bridgman method using double furnace with two siliconit heating elements. When the peak temperature of the upper furnace was fixed at $1150^{\circ}C$ and that of the lower furnace was $800^{\circ}C$, the temperature gradient was about $22.5^{\circ}C$/cm. The lattice constant $a_0$ was $6.482\AA$ from the X-ray diffraction and the band gap energy obtained from the optical absorption experiment at room temperature was 1.478 eV. PL spectrum showed that the bound exciton emission peak was resolved into ($A^0,X$) (1.5902, 1.5887 eV), ($h\;D^0$) (1.5918 eV) and ($D^0,X$ (1.5928, 1.5932 eV), and we have also calculated binding energy and ionization energy of the neutral donor and acceptor.

• Asian Journal of Turfgrass Science
• /
• v.23 no.2
• /
• pp.229-240
• /
• 2009

The high temperature and water content in soil profile probably affect the physiological disorder especially on cool-season turfgrasses in warm and humid weather of Korean summer. The purpose of this research was to analyze the effect of soil temperature and water content on the growth and stress response of creeping bentgrass(Agrostis palustris Huds.) under a humid and warm temperature. USGA(United State of Golf Association) green profile in laboratory test, Daily temperature changes were tested under a dried sand, 70% water content of field capacity, and saturated condition at $34^{\circ}C$ of the USGA green in lab. In this test, the dried sand reached to $80^{\circ}C$, however, the surface temperature decrease of $10^{\circ}C$ on the saturated condition. In the thermal properties test in field, thermal conductivity, thermal diffusivity, and soil temperature were increased followed by irrigation practise. In the water-deficient condition, the highest soil temperature was reached temporally right after irrigation, however, the excessive soil water content higher than field water holding capacity showed the highest soil temperature after a while. This result indicated that a heat damage to root system was caused from the thermal conductivity of a high surface soil temperature. The excessive irrigation when a high turf surface temperature should occur a negative result on tufgrass growth, moreover, it would be fatal to root growth of creeping bentgrass, especially when associated with a poor draining system on USGA sand green. Overall, this study shows that high soil temperature with water-excessive condition negatively affects on cool-season grass during the summer season, suggesting that excessive irrigation, over 70% field capacity of soil condition, does not help to reduce soil temperature for summer season in Korea. In the study that cool-season grass were treated with different water content of soil, The soil had higher temperature and more water holding capacity when treatment rate of soil conditioner was increased. The best growth at the normal water condition and the worst state of growth at thee water-excessive condition were observed.

• Resources Recycling
• /
• v.33 no.4
• /
• pp.47-61
• /
• 2024

As a recycling technology for recovering zinc contained in large amounts in electric arc furnace dust (EAFD), the most commercialized technology in the world is the Wealz Kiln Process. The Wealz Kiln Process is a process in which components such as Zn and Pb in EAFD are reduced/volatile (endothermic reaction) in high-temperature Kiln and then re-oxidized (exothermic reaction) in the gas phase and recovered in the form of Crude zinc oxide (60wt%Zn) in the Bag Filter installed at the rear end of Kiln. In this study, an experimental Wealz kiln was produced to investigate the optimal process variable value for practical application to the recycling process of large-scale kiln on a commercial scale. Additionally, Pellets containing EAFD, reducing agents, and limestone were continuously loaded into Kiln, and the amount of input, heating temperature, and residence time were examined to obtain the optimal crude zinc oxide recovery rate. In addition, the optimal manufacturing conditions of Pellets (drum tilt angle, moisture addition, mixing time, etc.) were also investigated. In addition, referring to the SiO₂-CaO-FeO ternary system diagram, the formation behavior of a low melting point compound, a reaction product inside Kiln according to the change in the basicity of Pellet, and the reactivity (adhesion) with the castable constructed on the inner wall of Kiln were investigated. In addition, in order to quantitatively investigate the possibility of using anthracite as a substitute for Coke, a reducing agent, changes in the temperature distribution inside Kiln, where oxidation/reduction reactions occur due to an increase in the amount of anthracite, the quality of Crude zinc oxide, and the behavior of tar in anthracite were also investigated.