• Korean journal of applied entomology
• /
• v.40 no.1
• /
• pp.51-58
• /
• 2001

Entomopathogenic fungus, Paecilomyces japonicus, has been commercially used as medicinal purpose . The silkworm, Bombyx mori, as an optimal host for the fungi, has been selected and used for the production of the fungal fruit bodies. In current method, newly molted fifth instal larvae should be exposed to the adverse stress environment of high temperature (3$0^{\circ}C$), high relative humidity ( 90%), and starvation for 24h for better fungal inoculation to the host insects. In this study, an alternative method using chemical agent, dexamethasone (DEX: an eicosanoid biosynthesis inhibitor), was tried to get the immunodepressive effect on the larvae to elevate the inoculation rate of the fungi to the silkworm without any harsh rearing environment. DEX (100$\mu\textrm{g}$) showed significantly synergistic effect on the hemocyte lethality of the fungus, and was effective to decrease cellular immune responses measured by the number of hemocyte microaggregation and phenoloxidase activity of the fifth instar larvae in response to the fungal injection. A detergent of 0.05% Triton-X was effective to increase the in- oculation rate of the fungi to the larvae and used in all fungal spraying solutions. Without any environ- mental stress treatment, only DEX (100$\mu\textrm{g}$) injection to the fifth instar larvae followed by the fungal spray was effective to get the inoculation rate equivalent to the current fungal spray method requiring harsh rearing environment. These results suggest that the inoculation of P. japonicus can be elevated by the help of DEX and that the silkworms use eicosanoids to elicit cellular immune response against fungal pathogen.

• Journal of Embryo Transfer
• /
• v.17 no.2
• /
• pp.163-168
• /
• 2002

The objective of this study was to investigate the clinical aspects on bovine abortion and stillbirth in Korea. Three hundred thirty eight bovine fetuses were collected from farms and submitted to the College of Veterinary Medicine, Seoul National University. Submitted fetuses were evaluated for season, parity and gestation stage on abortion during a 3 years period (June, 1999 to April, 2002). Out of four seasons, incidence of bovine abortion was significantly higher in summer than other seasons (P＜0.05) due to high temperature and humidity. After surveying of incidence of abortion according to parity, it was concentrated in low parity (1, 2 and 3 parity). However, this result was not caused by parity but because most of surveyed cow was low parity. For surveying the distribution of abortion incidence according to days of gestation, we divided the days of gestation into 3 stages including with early (0∼150 days), middle (151∼250 days) and late (251days∼term). Out of 319 aborted fetuses, incidences of abortion were significantly higher in the middle and late stage than early stage (P＜0.05). A high rate (75％) of stock farms did not vaccinate animals, therefore most of cows in Korea were found to have a high risk of becoming infected upon exposure to pathogens. Many of abortions occurred in stock farms where animals of other species were being bred. More studies will be needed to investigate possible linkages between bovine abortion and the breeding of other animal species.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.5
• /
• pp.473-480
• /
• 2011

The proton exchange membrane (PEM) fuel cell system is critically dependent on the humidity, which should be properly maintained over the entire operating range. A membrane humidifier is used for the water management in the PEMFC because of the membrane humidifier's reliable performance and zero parasitic power loss. In the PEMFC system, the membrane humidifier is required to provide appropriate humidity for the design point of the fuel cell. Although the performance of the fuel cell depends on the performance of the humidifier, few studies have provided a systematic analysis of the humidifier. We carry out an experimental analysis of the membrane humidifier using a vapor condensation bottle. The dry air pressure, water flow temperature, and air flow rate were chosen as the operating parameters. The results show that the time constant for the dynamic response of the membrane humidifier is relatively short, but additional analysis should be carried out.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.15 no.1
• /
• pp.9-16
• /
• 2013

Coastal sand dune area is an important ecosystem as an ecotone which is located between coastal area and terrestrial area. In order to understand the sand dune ecosystem in terms of its habitat characteristics, micrometeorological analysis was carried out in a coastal sand dune in Hakampo, Taeanhaean National Park, Korea. Micrometeorological measurements were made to monitor air and soil temperatures, relative humidity, soil water content, rainfall, solar radiation, wind speed, and wind direction. In contrary to a forest ecosystem, the coastal sand dune grassland ecosystem was relatively hotter and very humid with heavy rainfalls concentrated between June and July. The seasonal change of daily mean soil temperature was greater than that of air temperature by $2{\sim}3^{\circ}C$. Daily mean soil water content was less than 10% throughout the year. Also, the maximum wind speed of 156.7 m $s^{-1}$ was recorded on 7 October 2011. The observed seasonal wind direction was different from those observed at Seosan by KMA (Korea Meteorological Administration). To better understand the habitat characteristics in a costal sand dune grassland ecosystem, long-term multi-year measurements are needed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.7
• /
• pp.310-315
• /
• 2017

Automotive waterproof connectors are highly functional parts that must be air-tight in a complex environment. In the LSR multi-cavity injection molding process for manufacturing waterproof connectors, it is important to maintain a uniform curing temperature between the cavities in order to obtain a quality product. For this purpose, we designed the capacity of the cartridge heater differently for each position, and then linked the heat transfer analysis and optimization module to obtain the optimal cartridge heater capacity. As a result of the optimization analysis, the temperature deviation between cavities was decreased from $13.1^{\circ}C$ to $8.1^{\circ}C$ compared with the case in which constant heater capacity was applied, so that the design criterion could be satisfied within a temperature deviation of $10^{\circ}C$ for uniform curing. This study suggests that this method can be applied efficiently to the design of a large area multi-cavity LSR mold heater.

• Research in Plant Disease
• /
• v.19 no.1
• /
• pp.55-59
• /
• 2013

The purpose of this experiment was to investigate the development of new spot disease on the leaf and stem of rosemary (Rosmarinus officinalis) in commercial greenhouses at Jeonju and Namwon in Korea. Incidence of target spot on rosemary was higher at the end of the rainy season with high humidity. Those symptoms were black ring spots (3-5 mm in diameter) and withering on green leaves and stems. Conidiophores and conidia were formed on the infected tissue in moist chamber and conidia were shown as the cylindrical and oval types in chain, ranged from 55 to $275{\mu}m$ in length, and 7 to $14{\mu}m$ in width. Conidia with eight to ten pseudosepta were formed on the conidiapore. The optimum growth temperature of isolates was $30^{\circ}C$ on the PDA medium under the dark condition. In the pathogenesis test, the target spot and withering symptoms were appeared on the leaves and stems 3 days after inoculation showing similar symptoms compared to those of in nature. The same fungus was re-isolated from infected lesion, indicating that Corynespora cassiicola caused leaf target spot and twig blight on rosemary. The rDNA ITS nucleotide sequences of the pure cultured isolate from the diseased area on rosemary showed 100% similarity to the sequences of C. cassiicola available in the GenBank database (JQ595296, JQ595297, FJ852715 and AY238606). Therefore, we report that the target spot of leaves and stems in rosemary was caused by C. cassiicola.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.326-330
• /
• 2007

도시화 면적이 증가하면 불투수 면적이 증가하고 그에 따라 도시 하천의 평상시 유출이 감소한다. 도시유역의 평상시 수량을 회복시키는 방법으로는 침투 증진시설(투수성 포장, 침투 트렌치, 침투 측구 등)의 설치, 하수의 고도처리 후 방류 저수지에 의한 유황 개선, 지하철 용출수 활용 등이 있다. 우리나라의 경우에 일부 도시하천의 수량 감소가 심각한 상황에 이르고 있으며 이를 해결하고자 하는 노력이 최근에 나타나고 있다. 수량을 회복하려면 유량 평가를 위한 현장조사, 수량회복 계획, 재원의 반영, 수량회복 시설의 설치 및 관리의 순서로 단계별 사업이 수행되어야 한다. 계획 단계의 과업에서 필요한 사항은 여러 가지 수량 회복 방법의 영향을 정량 평가하는 것이다. 이에 핵심이 되는 것은 수량 회복 요소를 포함하거나 추가한 수문순환 평가 도구이다. 침투시설 중 투수성 포장과 침투 트렌치를 모의하도록 기존의 SWMM 모형을 수정하였다. 그 과정에서 증발량 처리와 지하수 출력기능에 대한 오류도 수정되었다. 수정 개발된 SWMM을 침투시설 모형실험 결과와 비교하여 수정된 프로그램의 적합성을 검증하였다. 투수성 포장과 침투 트렌치를 고려하여 수정된 프로그램을 안양천의 지류인 학의천 유역에 적용하여 침투시설의 효과를 분석하였다. 만일 학의천 불투수 면적의 10%를 투수성 포장으로 교체하면 하류 비산교 지점의 저수량$(Q_{275})$이 3 %, 갈수량$(Q_{355})$이 17 % 증가하는 것으로 분석되었다. 침투 트렌치의 경우 학의천 소유역 별로 100m 트렌치를 $5{\sim}10$개 시공할 경우 저수량은 약 1 %, 갈수량은 약9 %가 증가하였다. 수정 개발된 SWMM을 사용하면 침투 트렌치와 투수성 포장 이 도시 유역의 건기 수량회복에 미치는 영향을 분석할 수 있다.해 경보발령 이전에 한계수위를 넘어서는 경우(case_3)로서 분석되었다. 이러한 실패한 경보발령의 경우에 대한 원인분석 결과, 기존의 모형화를 통해 고려되지 못하였던 해안도시 홍수의 특성 중 총강우량에 대한 고려, 선행강우 여부 및 강우 지속시간, 지속시간 내 강우집중도 그리고 선정지점 내 조위의 영향과 유역내 합류식 하수관거 시스템의 영향 등 자연유역과는 다른 다소 복잡한 요소를 고려한 해안도시홍수 경보발령 기준에 대한 개선이 필요함을 확인할 수 있었다.이 좋다고 고찰된다. 6. 우리 나라의 현행 수도작기로 본 기온 및 일조조건은 수도의 분얼전기에 대해서는 호조건하에 놓여 있으나, 분얼후기인 7월 중ㆍ하순 경의 일조부족과 고온다습조건은 병해, 특히 도열병의 유발원인이 되고 있다. 7. 우리 나라의 현행수도작기로 본 전국각지의 수도의 출수기는 모두 일조시간이 적은 부적당한 시기에 처해 있다. 8. 출수후 40일간의 평균기온에 의한 적산온도 88$0^{\circ}C$의 출현기일은 수원에서 8월 23일이었고, 년간편차를 고려한 안전출수기일은 8월 19일로서 적산온도면에서는 관행 출수기일은 약간 늦다고 보았다. 9. 등열기의 평균기온에 의한 적산온도는 현행 수도작기로서는 최종한계시기에 놓여 있으며, 평균기온의 년간편차와 우리 나라의 최저기온이 낮은 점을 고려할 때, 현행출수기는 다소 늦은 것으로 보았다. 10. 생육단계별의 수도체내의 질소함량은 영양생장기의 질소함량이 과다하였으며, 출수 이후에 영양조락을 여하히 방지하느냐가 문제된다고 보았다. 11. 수리불안전답 및 천수답이 차지하는 전답면적의 비율은 차차 감소되고 있는데, 이와 전체 10a당 수량의 증가율과의 상관계수를 산출하였는데, 수리불안전답과의 상관계수 (4)는 +0.525였으며, 천수답과는 r=+0.832, 그리고 수리불안전답과 천수답을 합계한 것과의

• Journal of Food Hygiene and Safety
• /
• v.24 no.2
• /
• pp.169-173
• /
• 2009

A survey of total aflatoxin levels was conducted on 145 samples(carthamiflos, thujae semen, giycyrrhizae radix et rhizoma) collected in Yakyeang markets in Seoul. Aflatoxin levels were quantified by the immunoaffinity column clean-up method followed by performance liguid chromatography(HPLC)-fluorescence detector(FLD). Aflatoxins were found in 10(6.9%)samples including 5 Arecae semen, 4 Thujae semen, 1 Zizyphi semen with a range of $0.45{\sim}79.15\;{\mu}g/kg$. Generally These results show that the contamination level of aflatoxins in Herb Medicines consumed in Korea is high compared with the standard in Korea Herb Medicine Code($10\;{\mu}g/kg$ as aflatoxin B1). It is considered that aflatoxin concentration was increased in herb medicines during a storage and drying in herb medicines examined

• Korean Journal of Food Science and Technology
• /
• v.44 no.2
• /
• pp.235-239
• /
• 2012

This research was conducted to monitor ochratoxin A in wine, beer, $makgeolli$ and fermented alcoholic beverages to estimate the exposure to ochratoxin A in the assorted alcoholic beverages. The analytical method for ochratoxin A was based on immuno-affinity column clean up followed by HPLC-FLD. Ochratoxin A was detected in 30 samples of 177 wine (17%), 25 samples of 106 beer (23.6%), 11 samples of 74 $makgeolli$ (14.9%), and 7 samples of 74 fermented alcoholic beverages (9.5%). The average levels of ochratoxin A were 0.039 ng/mL in wine, 0.010 ng/mL in beer, 0.023 ng/mL in $makgeolli$, and 0.014 ng/mL in fermented alcoholic beverages. The daily dietary exposure level of ochratoxin A estimated by using the report on national health and nutrition survey were 0.039 ng/b.w.day from wine, 0.010 ng/b.w.day from beer, 0.023 ng/b.w.day from $makgeolli$, and 0.014 ng/b.w.day from fermented alcoholic beverage.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.4
• /
• pp.2344-2349
• /
• 2015

In Korea, summer is hot and humid, and air-conditioners consume too much electricity due to large amount of latent heat. Simultaneous usage of dehumidifier may reduce the latent heat and save the electricity. In this study, dehumidification performance was measured in a constant temperature and humidity chamber for a small-sized dehumdification rotor made of inorganic fiber impregnated with metallic silicate. Variables were rotor speed, room temperature, regeneration temperature, room relative humidity and frontal velocity to the rotor. Results showed that there existed optimum rotor speed (1.0 rpm), and optimum regeneration temperature ($100^{\circ}C$). Above the optimum rotor speed, incomplete regeneration is responsible for reduced dehumidification. Above the optimum regeneration temperature, increased temperature difference between regeneration and dehumidification process is responsible for reduced dehumidification. The amount of dehumidification also increases with the increase of relative humidity, dehumidification temperature and flow velocity into the rotor.