• 한국가스학회:학술대회논문집
• /
• 1997.09a
• /
• pp.63-77
• /
• 1997

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.71.2-71.2
• /
• 2013

천연가스를 화학적 전환에 의해 부가가치를 높이기 위해서는 리포밍에 의해 합성가스(CO/H2)를 경유하는 간접전환경로가 현재로서는 가장 현실적인 방법이라 할 수 있다. 천연가스를 이용한 합성가스 제조기술은 수증기개질법(SRM), 이산화탄소 개질법(CDR, dry reforming), 부분산화법, 촉매 부분 산화법, 자열개질법 등으로 구분되며, 최근에는 각각의 제조방법의 장점을 고려하여 혼합개질법 또는 일련의 리포머 조합 방법이 개발되고 있다. CDR은 촉매 하에서 메탄과 이산화탄소의 직접접촉에 의해 반응이 일어나며, 수소와 일산화탄소의 비가 같은 합성가스가 제조된다. SRM에 비하여 고온에서 반응이 일어나고 전환율이 더 낮으므로 에너지 소비가 상대적으로 높다. 하지만, SRM과 함께 사용하면 합성가스 비율을 F-T합성이나 메탄올 합성에 적절한 비율로 조절이 가능한 장점이 있으며, 온실가스를 저감시킬 수 있는 전환기술로도 각광받고 있다. 본 발표에서는 최근의 CDR을 이용한 가스로부터 합성석유(GTL)와 메탄올을 고효율로 생산하는 기술 개발 동향에 대해서 소개하고자 한다.

• 한국가스학회:학술대회논문집
• /
• 2007.04a
• /
• pp.33-36
• /
• 2007

합성가스는 C1화학을 시작하는 반응원료 물질로 최근 DME(dimethyl-ether), 메탄올, GTL(gas to liquid), CTL(coal to liquid), 암모니아 생성 공정 등 많은 화학공정에 사용되고 있다. 합성가스를 생산하는 방법은 천연가스 개질반응과 석탄의 가스화반응, 그리고 원유의 정제 등을 통해 얻을 수 있다. 삼중개질반응은 천연가스와 산소, 수증기, 이산화탄소를 원료로 $1000^{\circ}C$ 이상의 고온에서 반응시켜 합성가스를 생산하며, 균일반응계와 불균일반응계로 이루어져 있다. 균일반응계에서는 천연가스와 산소가 주로 반응하며, 원료로 투입된 대부분의 산소는 균일반응계에서 소모되어 일산화탄소와 이산화탄소를 생성한다. 삼중개질반응의 균일반응계에서는 산소와 천연가스와의 반응으로 많은 발열이 발생하여 전체 반응계의 온도를 유지할 수 있도록 해준다. 본 연구에서는 산소로 인한 삼중개질반응의 온도 조절과 균일반응계의 온도 분포를 위치에 따라 관찰해 보았으며, 실험과 모사를 통해 비교해 보았다.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.1
• /
• pp.108-115
• /
• 2017

Generally, there are three ways to remove VOCs from the small painting booth; adsorption, burn and oxidation catalyst. RTO and RCO are high efficiency methods for removing VOCs. But they require large installation areas, which are not suitable for the small painting booth. And we need a new removing method because it is difficult to predict the A/C changing time and the recycle time. To solve these problems, we have developed the Arc plasma system which is simple and enable consecutive-use. It removes VOCs effectively and eco-friendly. In this study we have investigated the enrichment material and VOCs removal efficiency.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.1
• /
• pp.55-60
• /
• 2010

Vortex tube is the device that can separate small particles from the compressed gas, as well as compressed gas into hot and cold flow. Due to energy separation ability, a vortex tube can substitute for an EGR cooler of the automotive engine. In this study, experimental approach has been performed to analyze the energy separation characteristics of the vortex tube. Energy separation characteristics of the vortex tube has been tested for supply pressure, cold-out pressure, and hot-out pressure. As increasing supply pressure, energy separation effect increased. Maximum temperature exists about 0.85 of the cold-out-flow-ratio, and minimum exists about 0.35. Hot-out temperature of the vortex tube is affected by the hot-out and cold-out pressure. However, for the given conditions, cold-out temperature is independent of exit pressure change. The results from this study can be used for the basic design parameter of the EGR cooler substitute of an automotive engine.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.9
• /
• pp.1137-1143
• /
• 2011

The IHX (intermediate heat exchanger) of a VHTR (very high-temperature reactor) is a core component that transfers the high heat generated by the VHTR at $950^{\circ}C$ to a hydrogen production plant. Korea Atomic Energy Research Institute manufactured a small-scale prototype of a PCHE (printed circuit heat exchanger) that was being considered as a candidate for the IHX. In this study, as a part of high-temperature structural integrity evaluation of the small-scale PCHE prototype, we carried out high-temperature structural analysis modeling and macroscopic thermal and elastic structural analysis for the small-scale PCHE prototype under small-scale gas-loop test conditions. The modeling and analysis were performed as a precedent study prior to the performance test in the small-scale gas loop. The results obtained in this study will be compared with the test results for the small-scale PCHE. Moreover, these results will be used in the design of a medium-scale PCHE prototype.

• Korean Chemical Engineering Research
• /
• v.52 no.6
• /
• pp.821-825
• /
• 2014

Steam gasification of sawdust char was performed in a thermobalance reactor at high temperature. Gasification temperature was changed from $850^{\circ}C$ to $1400^{\circ}C$ and steam partial pressure was 0.3, 0.5 and 0.7 atm. Three models of gas-solid reaction were applied to the reaction kinetics analysis and modified volumetric model was an appropriate model. Reaction control regime and diffusion control regime were distinct depending on the temperature. Apparent activation energy and pre-exponential factors for both of the regimes were evaluated and the effects of steam partial pressure were examined. $H_2$ concentration in the produced gas was two times higher than that of CO due to the gasification accompanying by the water gas shift reaction.

• Journal of the Korean Institute of Gas
• /
• v.17 no.1
• /
• pp.56-66
• /
• 2013

The gas production plants supply the inert gas to production plants for maintaining safe operation and also supply combustible, flammable, explosive and toxic gases as functions of basic materials needed for producing chemical goods. In addition, gas plants need to be safe and reliable operation because they are operated under high temperature, high pressure, cryogenic and catalytic reactions. As these plants have a complex process in operation, there has been a risk that major industrial accidents such as a fire, explosion and toxic gas released, also risks of asphyxiations by inert gases and burns caused by high temperature and cryogenic substances. This study is to carry out the semi quantitative risk assesment method which is the generic risk analysis (GRA). This method is applied to air separation unit(ASU) to identify its initial risk, safety barriers, residual risk and elements important for safety(EIS). The result of this study, suggested the management tools and procedures of implementation for EIS management.

• Journal of the Korean Institute of Gas
• /
• v.4 no.4 s.12
• /
• pp.25-33
• /
• 2000

In recent years, the subject of remaining life assessment has drawn considerable attention in power plants, where various structural components typically operate at high temperature and pressure. Thus a life prediction methodology accounting for high temperature creep fracture is increasingly needed for the components. Critical defects in such structures are generally found in the form of semi-elliptical surface crack, and the analysis of which is consequently an important problem in engineering fracture mechanics. On this background, we first develop an auto mesh generation program for detailed 3-D finite element analyses of axial and circumferential semi-elliptical surface cracks in a piping system. A high temperature creep fracture parameter $C^{\ast}$-integral is obtained from the finite element analyses of generated 3-D models. Post crack growth module is further appended here to calculate the amount of crack growth. Finally the remaining lives of surface cracked pipes for various analytical parameters are assessed using the developed life assessment program.

• Resources Recycling
• /
• v.25 no.5
• /
• pp.14-27
• /
• 2016

Theoretical reviews of integrated gasification combined cycle one of the clean coal technologies and trends in the study and technology development for high temperature desulfurization sorbents were investigated. Reactivity, durability and abrasion resistance is an important key for development of high temperature desulfurization sorbents, the kind of things include calcium, zinc, manganese, iron and copper-based sorbents. Current status of high temperature desulfurization sorbents, manufacturing techniques of zinc-based sorbent in advanced countries has commercialized. In case of Korea, various research studies are underway to commercialize the Zn and non Zn-based high temperature desulfurization sorbents to cheaper and superior capability using various supports.