• Korean Chemical Engineering Research
• /
• v.58 no.4
• /
• pp.581-587
• /
• 2020

In this study, a new reaction system is proposed to solve the problems of the existing 2,3-Butanediol (2,3-BDO) dehydration reaction system. It was confirmed that the reaction system did not wok as it should operate properly when using a furnace, which is commonly used in commercial processes, to raise the reactant, 2,3-BDO, to the reaction temperature, 360 ℃, at near atmoshperic pressure. It is because of the substance considered to be oligomers of 2,3-BDO. It can lead to safety problems, such as blockages inside the furnace's tube and explosions, as well as tricky maintenance issues in the reaction system. To solve it, the temperature of reactant can be brought down by using a heat exchanger with High Pressure (HP) steam instead of the furnace, which has a hot spot problem through the vacuum operation and reduce the reaction temperature. It can be seen that the reactor performance is almost similar under the vacuum operation and the lower reaction temperature, 330 ℃, by using a reaction kinetics. This result explains why the new reaction system is proposed.

• Korean Chemical Engineering Research
• /
• v.52 no.3
• /
• pp.307-313
• /
• 2014

In this study, an optimization process design has been performed to separate 99.9 mol% of Isobutyl Acetate from binary azeotropic mixture of Isobutyl Acetate and Isobutyl Alcohol system using a Pressure Swing Distillation (PSD). PSD is used to separate binary azeotropic mixtures using the difference between the relative volatilities and azeotropic compositions by changing the system pressure. Non-Random Two Liquid (NRTL) model for liquid phase and the Peng-Robinson equation for vapor phase are used. An optimization study for the reflux ratio and feed stage locations which minimize the total reboiler heat duties are studied. Since PSD process consists of two columns, i.e. high pressure and low pressure, the effect of column sequence on the optimum conditions is reported.

• Applied Chemistry for Engineering
• /
• v.26 no.6
• /
• pp.681-685
• /
• 2015

In this study, pure $BiVO_4$ powder and metal-doped $M-BiVO_4$ (M = Mg, Cu) powder, well known as thermochromic materials, were prepared from a mixed aqueous solution of bismuth nitrate ($Bi(NO_3)_3$) and ammonium vanadate ($NH_4VO_3$) in autoclave by hydrothermal method. The crystal structure, microstructure, and thermochromic property of samples were analyzed using FE-SEM, FT-IR, XRD, DSC, UV-Vis-NIR spectroscopy and colorimeter. When heating samples above phase transition temperature, the color of $M-BiVO_4$ (M = Mg, Cu) sample was thermally changed more clearly than that of using only pure $BiVO_4$ sample.

• Applied Chemistry for Engineering
• /
• v.28 no.3
• /
• pp.313-317
• /
• 2017

With the continuous increase of energy demand, low-grade coal is regarded as one of new energy sources. However, due to the high water content, the utilization efficiency of low-grade coal is not good to be used in recent conversion plants. Therefore, it requires a drying process to lower the water content in low-grade coals. Although a variety of drying experiments were conducted, drying characteristics in accordance with the pressure change has not been progressed. In this study, the flash drying characteristics of low grade coal with high moisture content (21.5 wt%) were determined in a pressurized micro-riser. The effect of operation conditions such as pressure (1-40 bar), dryer temperature ($200-600^{\circ}C$), and tube length (2-6 m) on drying ratios were investigated.

• Applied Chemistry for Engineering
• /
• v.19 no.6
• /
• pp.645-651
• /
• 2008

In this study, the new solubility data at high pressure condition applicable to pre-combustion $CO_2$ capture system were found. Experiments were conducted within the temperature range of $40{\sim}80^{\circ}C$ while increasing the pressure from 0 to 50 bar. The effect of MDEA (N-methyldiethanolamine) concentration was studied by varying the concentration from 30 to 50 wt%. In order to improve the absorption rate of MDEA, piperazine was added in ranging of 5~10 wt% into the MDEA solution as a activator. From this experiment, the equilibrium partial pressure was increased with increasing MDEA concentration in absorbent and reaction temperature. Also absorption rate was increased with increasing the reaction temperature. It was noted that the mixture of piperazine and MDEA aqueous solution showed faster absorption rate by 2.5 times than only the MDEA aqueous solution with 40 wt% cencentration at initial reaction stage and also increased absorption capacity by 16%.

• Applied Chemistry for Engineering
• /
• v.24 no.3
• /
• pp.260-265
• /
• 2013

In this study, nano-emulsions containing 0.01, 0.03, 0.05, and 0.10% ethyl acetate fraction of Hippophae rhamnoides (H. rhamnoides) leaf extracts were prepared. The particle size, particle size distribution and skin permeability of the nano-emulsions were evaluated for five weeks. Nano-emulsion was prepared by the sequential use of homogenizer and microfluidizer. Nano-emulsion containing the ethyl acetate fraction exhibited a monodispersed form. Nano-emulsion containing 0.03% ethyl acetate fraction was the most stable for five weeks. The in vitro skin permeation study of nano-emulsion containing 0.03% ethyl acetate fraction was carried out using Franz diffusion cell. The nano-emulsion showed a better skin permeability than that of O/W emulsion. These results indicate that the nano-emulsion containing the ethyl acetate fraction of H. rhamnoides leaf extract showed a remarkable stability and skin permeability than that of O/W emulsion.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.36 no.6
• /
• pp.496-503
• /
• 2016

Leakages at plant structures of power and petrochemistry plants have led to casualties and economic losses. These leakages are caused by fatigue failure of pipelines and their wall thickness. Vibration measurement methods for plant pipelines mainly use acceleration and laser sensors. These sensors are difficult to install and operate and thus lead to an increase in operational cost especially for wide area surveillance. Recently, measurements of leak and vibration displacements using cameras have attracted the interest of many researchers. This method has advantages such as simple installation, long distance monitoring, and wide area surveillance. Therefore, in this paper, we have developed a system that can measure the leakage and vibrational displacement by using a camera. Furthermore, the developed system was verified with experimental data.

• Applied Chemistry for Engineering
• /
• v.1 no.2
• /
• pp.240-248
• /
• 1990

The catalytic activity and selectivity of metal loaded H-mordenite for transalkylation of $C_9$ aromatics were studied in a continuous flow fixed bed reactor under high pressure. Nickel loaded H-mordenite(T-Ni) catalyst showed high activity and slow decay of activity. Molybdenum and nickel loaded H-mordenite(T-NiMo) catalyst also showed high activity and suppressed coking of hydrocarbons. The selectivity of xylene for T-Ni and T-NiMo catalysts decreased with temperature, but that for T catalyst(commercial grade) monotonically increased with temperature within the experimental range. The performance of T-Ni and T-NiMo catalysts was better than that of T catalyst in terms of initial activity and its decay. The addition of Mo improved slightly stability of T-Ni catalyst.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.81.1-81.1
• /
• 2012

나노임프린트 리소그라피(Nano-Imprint Lithography, NIL) 기술은 기판위의 resin을 나노구조물이 각인된 스탬프로 눌러서 나노구조물을 형성하는 기술로, 경제적이고 효과적으로 나노구조물을 제작할 수 있는 기술이다. 그중에서도 UV 기반의 나노임프린트(UV-NIL) 기술은 resin을 투명한 스탬프로 누른뒤 UV로 경화시켜 나노구조물을 형성하는 기술로써 고온, 고압($140{\sim}180^{\circ}C$, 10~30bar)이 필요한 가열식 나노임프린트 기술에 비해 상온, 상압($20^{\circ}C$, 1bar)에서도 구조물 형성이 가능하여 다층구조 형성에 적합하다. 연속적인 임프린팅 공정에 의해 resin이 quarz 스탬프에 잔류하여 패터닝에 결함을 유발하게 되므로 오염물을 제거하기 위한 세정공정이 필요하다. 하지만 UV에 의해 경화된 resin은 cross-linking을 형성하여 화학적인 내성이 증가하게 되므로 제거하기가 어렵다. 현재는 resin 제거를 위한 세정공정으로 SPM($H_2SO_4/H_2O_2$) 세정이 사용되고 있는데 세정시간이 길고 세정 후에 입자 또는 황 잔유물이 남으며 많은 유해용액 사용의 문제점이 있어 효과적으로 resin을 제거할 세정공정이 필요한 상황이다. 본 연구에서는 친환경적인 UV 세정 및 오존수 세정공정을 적용하여 경화된 resin을 제거하는 연구를 진행하였다. 실험샘플은 약 100nm 두께의 resin을 증착한 $1.5cm{\times}1.5cm$ $SiO_2$ 쿠폰 wafer를 사용하였으며, UV 및 오존수의 처리시간을 달리하여 resin 제거효율을 평가하였다. ATR-FTIR 장비를 사용하여 시간에 따른 resin의 두께를 측정한 결과, UV 세정으로 100nm 높이의 resin중에 80nm의 bulk resin이 단시간에 제거가 되었고 나머지 20nm의 resin thin film은 오존수 세정으로 쉽게 제거되는 것을 확인 하였다. 또한 표면에 남은 resin residue와 particle을 제거하기 위해서 SC-1 세정을 진행하였고 contact angle과 optical microscope 장비를 사용하여 resin이 모두 제거된 것을 확인하였다.

• Applied Chemistry for Engineering
• /
• v.19 no.2
• /
• pp.236-241
• /
• 2008

The possibility of silicon oxidation through the aerial-diffusion of active oxygen species has been evaluated. The species originate from the surface of $TiO_2$ exposed by UV. Among process parameters such as UV intensity, substrate temperature and chamber pressure with oxygen, UV intensity was a major parameter to the influence on the oxide growth rate. When 1 kW high pressure Hg lamp was used as a UV source, the growth rate of silicon oxide was 8 times as faster as that of a 60 W BLB lamp. However, as the chamber pressure increased, the growth rate was declined due to the suppression of aerial diffusion of active oxygen species. According to the results, it could be confirmed that the aerial-diffusion of active oxygen species from UV-irradiated photocatalytic surface can be applied to a new method for preparing an ultra-thin silicon oxide at the range of relatively low temperature.