• Journal of the korean Society of Automotive Engineers
• /
• v.8 no.3
• /
• pp.1-8
• /
• 1986

자동차 동력전달계통의 중요부분을 이루고 있는 치차장치는 고장의 영향도가 대단히 높은 장치일 뿐만 아니라 점검과 열화, 손상검지가 곤란한 장치이다. 지금까지, 치차진단기술의 연구는, 구미 에서는 성행하고 있음에도 불구하고, 국내에서는 그다지 되고있지 않다. 이와 같은 상황을 근거로 하여, 본 연구실에서는 치차진단기술의 연구개발에 착수하여, 그 첫 번째 단계로서, 현상의 기술 및 연구내용을 조사하였다. 그들중에서 중요하다고 생각되는 것을 여기에 소개한다. 치차장치의 내부에 이상이 생기면, 진동과 이음이 생기기도 하고 속도변동 등을 일으킨다. 또, 윤활유 중의 금속분이 증가하거나, 온도가 상승하기도 한다. 이와같은 이상의 정보를 포함하는 것을 징후 parameter라고 말한다. 이들 몇 개인가의 parameter중, 치차결함의 검출은, 진동과 음이 가장 좋은 parameter라고 생각되고 있다. 따라서 진단기술의 연구는, 거의 대개가 치차로부터 나오는 진동과 음의 발생기구와 신호처리에 관한 것이다. 전자로는 (1) 치차의 마모모델과 발생진동수 (2) 각종 결함고 발생진동수 후자로는 (3) 시간평균화처리 (4) Cepstrum (5) fluctuation 분석 등이 있다.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.2 no.2
• /
• pp.153-157
• /
• 2003

Purpose: To identify injuries and profile the characteristics of injured skiers and to use this information in designing injury-prevention programs and protective equipment. Materials and Methods: Injured skiers treated at a clinic of a ski resort located in Kangwon province in Korea were reviewed from 1998 to 2001. An injury was defined as any accident occurred during alpine skiing that required medical treatment. All injured skiers were asked to fill in a questionnaire which documented the mechanism of injury, their experiences , and the slope where they were injured Results: 1197 patients experienced ski injuries over a three-year-period. The overall incidence of ski injuries was 6.4 injuries per 1000 skiers. There was a slightly higher proportion of men than women and the mean age was in the third decade. The injury rate was higher for beginners and for less difficult slopes . The sprain and ligament injuries were most common and knee injuries accounted for 30$\%$ of all ski injuries . Conclusion: In our study , ski injuries occurred more often compared with foreign reports. it was concluded that an insufficient injury prevention system, an increasing number of skiers and a growing proportion of beginners was responsible for such a result.

• Investigative Magnetic Resonance Imaging
• /
• v.11 no.2
• /
• pp.119-126
• /
• 2007

MR (magnetic resonance) imaging of the brachial plexus is challenging because of the complex and tangled anatomy of the brachial plexus and the multifariouness of pathologies that can put on it. Improvements in imaging techniques, including the availability of high resolution MR image systems and high channels multidetector computed tomography (CT), have led to more accurate diagnoses and improved serve for treatment planning. For the purpose of imaging and treatment of the brachioplexopathy, it is considerate to divide traumatic and nontraumatic diseases affecting the brachial plexus. MRI is the current gold standard imaging modality for nontraumatic brachial plexopathy. CT myelography is the preferred for the diagnosis of nerve root avulsions affecting the brachial plexus. Other modalities, such as CT, ultrasonography and positron emission tomography, have a limited role in the evaluation of brachial plexus pathology. High-quality, high-resolution MRI remains the main tool for imaging the brachial plexopathy.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.12 no.6
• /
• pp.1-6
• /
• 2008

This work proposes a fuzzy trend monitoring method for the fault detection of a gas turbine engine through analyzing measured performance data trend. The proposed trend monitoring technique can diagnose the engine status by monitoring major engine measured parameters such as fuel flow rate, exhaust gas temperature, rotor rotational speed and vibration, and then analyzing their time deppendent changes. In order to perform this, firstly the measured engine performance data variation is formulated using Linear Regression, and then faults are isolated and identified using fuzzy logic.

• Journal of Chest Surgery
• /
• v.37 no.6
• /
• pp.467-473
• /
• 2004

Background: The sinus conversion rate after the maze procedure in chronic atrial fibrillation using radiofrequency energy is lower than with either conventional 'cut and saw' technique or cryothermia. The creation of incomplete transmural lesions due to poor tissue-catheter contact is thought to be the main cause. To address this problem, the current study was aimed to evaluate the effectiveness of a specially constructed compression device designed to enhance tissue catheter contact during unipolar radiofrequency catheter ablation. Material and Method: Circum-ferential right auricular epicardial lesions were created with a linear radiofrequency catheter in 10 anesthetized pigs. A device specially designed to increase contact by compression of the catheter to the atrial wall was used in 5 pigs (study group). This device was not used in the control group (5 pigs). Conduction block across the right auricular lesion was assessed by pacing, and the transmurality of the lesions were confirmed by microscopic examination. Result: Conduction block was observed in a total of 8 pigs; 5 in study group and 3 in control group. Transmural injury was confirmed microscopically by the accumulation of acute inflammatory cells and loss of elastic fibers in the endocardium. In two pigs with failed conduction block, microscopic examination of the endocardium appeared normal. Conclusion: Failed radiofrequency ablation is strongly related to non-transmural energy delivery. The specially constructed compression device in the current study was successful in creating firm tissue-catheter contact and thereby generating transmural lesions during unipolar radiofrequency ablation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.569-569
• /
• 2013

대부분의 태양전지 공정은 퍼니스와 레이저 도핑 공정이 중요한 공정 중 하나다. 퍼니스 도핑공정의 경우 저농도 도핑영역에 선택적으로 고농도 도핑영역을 형성하기가 일반적으로 어렵다. 레이저를 사용한 선택적 도핑의 경우 고가의 레이저 장비가 요구되어지며, 레이저 도핑 후 고온의 에너지로 인한 웨이퍼의 구조적 손상 문제를 야기한다. 본 연구는 저가이면서 새로운 구조의 대기압 플라즈마 제트를 개발하였고, 이를 통한 선택적 도핑에 관한 연구를 하였다. 대기압 플라즈마 제트는 Ar 가스를 주입하여 저주파(1~100 kHz) 전원을 인가하여 플라즈마를 발생시키는 구조로 제작하였다. 웨이퍼는 P-type shallow 도핑 된(120 Ohm/square) PSG (Phosphorus Silicate Glass)가 제거되지 않은 웨이퍼를 사용하였다. 대기압 플라즈마 도핑 공정 처리시간은 15 s, 30 s, 플라즈마 발생 전류는 40 mA, 70 mA로 처리하였다. 웨이퍼의 도핑프로파일은 SIMS (Secondary Ion Mass Spectroscopy)측정을 하여 분석을 진행하였으며, 도핑 후 도핑프로파일을 통하여 면저항등 전기적 특성을 파악하였다. 도펀트인 PSG (Phosphorus Silicate Glass)에 대기압 플라즈마 제트로 도핑공정을 처리한 결과 전류가 상승함에 따라, 도핑 처리시간이 길어짐에 따라서 도핑깊이가 깊어지고, 면저항이 낮아짐을 확인하였다. 대기압 플라즈마 도핑 후 웨이퍼의 구조적 손상파악을 위한 SEM (Secondary Emission Microscopy) 측정결과 도핑 전과 후 웨이퍼의 표면구조는 차이가 없음을 확인하였다.

• Journal of the Korea Convergence Society
• /
• v.2 no.4
• /
• pp.47-52
• /
• 2011

Periodontal disease is a common inflammatory disorder that is being considered as a risk factor for atherosclerotic complication. Recent epidemiological evidence also supports that its potential association with increased blood pressure levels and hypertensive prevalence. Data from cross-sectional studies suggest that in hypertensive patients periodontal disease may enhance the risk and degree of target organ damage. So dental infections have been associated with cardiovascular diseases. There are potential pathophysiologic links between hypertension and periodontits. The role of the inflammatory pathway include C-reactive protein(CRP). CRP is an inflammatory mediator that has been shown to predict the development of hypertension independently of baseline BP and traditional risk factors, has been consistently reported as at least mildly elevated in patients with periodontal disease. Reactive oxygen species produced by locally infiltrating neutrophils participate in periodontal tissue destruction. Periodontits can lead to inflammatory responses in the atrial myocardium, which disturbs the structural and electrophysiologic properties of the atrium and facilitates atrial fibrillation in the animal experiment.

• Tunnel and Underground Space
• /
• v.29 no.4
• /
• pp.262-279
• /
• 2019

In the engineering barriers of high-level radioactive waste disposal, gases could be generated through a number of processes. If the gas production rate exceeds the gas diffusion rate, the pressure of the gas increases and gases could migrate through the bentonite buffer. Because people and the environment can be exposed to radioactivity, it is very important to clarify gas migration in terms of long-term integrity of the engineered barrier system. In particular, it is necessary to identify the hydro-mechanical mechanism for the dilation flow, which is a very important gas flow phenomenon only in medium containing large amounts of clay materials such as bentonite buffer, and to develop and validate new numerical approach for the quantitative evaluation of the gas migration phenomenon. Therefore, in this study, we developed a two-phase flow model considering the mechanical damage model in order to simulate the gas migration in the engineered barrier system, and validated with 1D gas flow modelling through saturated bentonite under constant volume boundary conditions. As a result of numerical analysis, the rapid increase in pore water pressure, stress, and gas outflow could be simulated when the dilation flow was occurred.

• The KIPS Transactions:PartA
• /
• v.11A no.2
• /
• pp.175-180
• /
• 2004

Generally, as for the multimedia high quality contents, an illegality facsimile is possible without a damage of a quality. Also a distribution of contents duplicated illegality in an Internet is giving a great economic loss to digital contents provider. Therefore, a study for security and efficient distribution of digital contents is required. The most important issues in a design of digital contents distribution system are a user convenience, an execution speed and a security. In this study, we designed digital contents distribution system that used a web caching technology and an encryption/decryption technique on hierarchical structure. The proposed system was the digital contents distribution system that improved a security and execution speed, a convenience of a user. Also it verified performance superiority of a proposed system by an examination.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.240-244
• /
• 2017

Experimental verification in the rig test stage for component development is a vital link between the aeromechanical design and structural integrity validation process. Based on this premise, Non-Intrusive Stress Measuring System was adopted on the axial compressor test rig to measure the static and dynamic tip deflection of all blades by using tip-timing sensors. Through analyzing vibration characteristics, we evaluated the vibratory stresses seen on the blades fatigue critical location; detected synchronous resonances which are the source of High Cycle Fatigue (HCF) in blades; presented non-synchronous vibration response by aerodynamic excitation and individual blade mis-tuning patterns.