• Proceedings of the KSR Conference
• /
• 1999.11a
• /
• pp.172-180
• /
• 1999

The major subject of this paper is to develop the concept fur a Korea high speed train system and recommend to train configuration. High speed train configurations are basically concerned traction power(train configurations with concentrated; CPT or distributed Power system: DPT) and train design(single car as compared with articulated bogies). The result of configuration, a advantages and disadvantaged were necessitated by different train configurations; -distributed underfloor power have an increased length for the seats by 15% as compared with the concentrated power trait - articulated trainsets are characterised by less of number of bogies and reduced values of mass, train resistance, noise and vibration. from the result, the optimized train concept combining high seat capacity per train length with low weight and train resistance is 400m long, single -floor train composed of two symmetrically arranged half trainsets. Therefore, at this work recommended distributed train system However, the final decision of Korea high speed train configuration was concentrated power train and articulated bogie system. The configuration of trainset was 20cars included 2 power cars, 4 motorized cars and 14 trailer cars.

• Proceedings of the KSR Conference
• /
• 1998.11a
• /
• pp.161-168
• /
• 1998

This paper presents an simulation methdology for determining an economical running pattern for a high speed train which minimizes energy consumption under an given trip time margin. The economical running pattern is defined with an economical maximum speed in traction phase, a speed at the end of coasting and a speed at the end of regenerative braking alone in braking phase. An economical run for subways is also described. As a case study, the simulation is carried out fer an economical run of high speed NamSeoul-Pusan line, and the results described. To do this, train performance simulation program is built and extended to be able to find an economical running pattern and then to simulate the defined economical run.

• Proceedings of the KSR Conference
• /
• 2009.05b
• /
• pp.209-214
• /
• 2009

In this research, an external noise distribution of a HST has been analyzed by using a ray tracing techniques. An aero-dynamic noise generated from a bogie has been considered as a major noise source. Then a distribution of the noise on the outside of the vehicle is calculated using a ray noise technique. The models simulated are two different acoustic fields: an open field and a tunnel. In order to evaluate the noise effects, an exterior structure has been modified by using a different length of skirts. Various application schemes of reducing an environmental noise level will be expected for a HST based on this research.

• Proceedings of the KSR Conference
• /
• 2009.05b
• /
• pp.447-453
• /
• 2009

The interior noise of the High Speed Train(HST) is analyzed by applying the statistical energy analysis (SEA) method. The interior of each vehicle is divided lengthwise into nine cavities. Since the rolling noise and aerodynamics noise are expected to be dominant noise sources, they are treated as the noise sources in the model. To further simplify the model, curtains and seats are excluded. The simulation runs involving one-car, three-car and five-car trains are conducted. The maximum predicted noise level is 98.4dB. The results also show that the predicted noise levels are within 0.23% of each other. The results imply that it is not necessary to estimate the interior noise of the train by constructing multiple-car train models. The noise estimate based on just one-car train can be optimal with respect to the computational effort and modeling time.

• Journal of the Korean Society for Railway
• /
• v.10 no.3 s.40
• /
• pp.319-326
• /
• 2007

During the design phase of a system, which requires high reliability and safety such as aircraft, high speed train and nuclear power plant, reliability engineer must set up the target system reliability. To meet a reliability goal for the system, reliability allocation should be done gradually from the system to its element. For this end, first of all, we need to construct functional block diagram based on the design output and PWBS(Project Work Breakdown System). Another important input data for reliability allocation is the relationship between the cost and the reliability. In this study we investigate various reliability allocation models, which can be applicable to aircraft, vehicle, and power plant, and etc. And we suggest a proper reliability allocation model which can be effectively applicable to KTX-II high speed train to achieve the target system reliability.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1178-1187
• /
• 2008

According to the operation data between $2007{\sim}2008$(January$\sim$June) for essential safety equipment including ATC, there were nothing special but stable and steady. And also emergency stop number of count are decreasing. But the frequency are still above the resonable count and it means driving condition should be improved through interface between ground and locomotive same as come to an understanding with driver. The number of count of emergency stop for VACMA(vigilance system) are also decreasing but also the frequency are above resonable count. This phenomenon caused by careless driving for the driver or the system malfunction. So the continuous monitoring for the data is necessary.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1426-1434
• /
• 2008

This paper addresses the numerical study on the dynamics of the High-speed EMU to enhance the ride quality. The 17 and 34 degrees-of-freedom (DOF) dynamic models for a single railway vehicle are proposed, and its vibrational characteristics according to the nonuniform rail profile are analyzed via Matlab. The validity of the proposed 34-DOF model are verified by comparing its dynamic characteristics and those from ADAMS/Rail. In addition, the critical dynamic parameters are identified by the parametric analysis, and rough design variables to reduce the vibration level of the railway vehicle are proposed. Finally, the frequency analysis - FFT - are conducted to extract the resonant frequencies, which have a significant influence on the determination of the critical speed of the railway vehicle. It is demonstrated that the results from the Matlab-based numerical analysis of the 34-DOF dynamic model are similar to those from ADAMS/Rail.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.544-548
• /
• 2008

Typically electronic resistance type sensors have been used for measurement system of high-speed trains. But due to a large number of measurement quantities, we had difficulties in installing and maintaining the cables that connect sensors and measuring devices. Furthermore, signals obtained from the electronic resistance type sensors are often distorted because the sensors and cables are vulnerable to electro-magnetic interference (EMI). In this paper the characteristic of FBG sensors are compared with those of electronic resistance type sensors in application for the measurement system of high-speed trains. FBG sensors have advantages because of their multiplexing characteristic and robustness to EMI environment.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.555-560
• /
• 2008

Korean Train Express (KTX) has been commercially operating and achieving elevation on transport capacity since 2004. And HSR-350x was developed and succeeded in testing of running over 350km/h. The new high-speed train development project, HEMU-400x project, has started since last year. To develop the train system, it is important how we progress the configuration of the system, design, manufacturing and test verification. The authors devised the performance estimate and verification process of the HEMU-400x and the project is performed following the developed processes.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1463-1472
• /
• 2008

The present paper to relate with the maintenance of the high-speed vehicle, KTX and is to treat a reliability evaluation. The reliability of the high-speed vehicle while operating between-failure average mileage (MKBSF) and parts between-failure average mileage (MKBF), 1,000,000 per km service failure number of items and availability and per km evaluated a maintenance expense. The reliability evaluation results and 2007 year reliability management indexes compared in 2006 years and they improved, per km the maintenance expense compared at 2006 and 36.6% was decreased. Reliability management activity leads and availability of the high-speed vehicle, safety improves and with the fact that will be able to decrease the maintenance expense which is an economic scale of railroad service is expected.