• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.2
• /
• pp.212-219
• /
• 1998

Unburned hydrocarbon is a key contributor to both the fuel economy and emissions of automotive engine. Cyclic variation of HC emission is of importance, especially during throttle transients. The real time measurement of hydrocarbon is particularly important to obtain a better understanding of the mechanisms for combustion and emissions, especially during cold start and throttle transient condition. This paper reports the cycle resolved measurement technique of unburned hydrocarbons to quantify rapid changes of in-cylinder concentration in the vicinity of spark plug by using the Fast Response Flame Ionization Detector(FRFID). While this instrument actually measures fuel concentration, its results can be indicative of the AFR behaviour. In order to understand the rapid change of hydrocarbons with cylinder pressure, it is necessary to study the response time delay of the system, including the time associated with gas transportation to FID. And signal from FRFID is correlated with cylinder pressure data to relate changes in mixture preparation to the classic analysis, such as indicated mean effective(IMEF) and ignition delay, etc.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10c
• /
• pp.94-96
• /
• 2003

고속 네트워크의 등장으로 관리 영역을 초월한 계산 자원의 공유가 가능하게 되었고, 그리드 컴퓨팅이 등장하게 되었다. 그리드 환경에 포함된 각 자원들은 이질적이기 때문에 고성능을 얻기 위해서는 효과적인 자원 발견 및 자원 선택이 중요하다. 본 논문에서는 그리드 컴퓨팅에서 다양하고 이질적인 자원들을 각 응용프로그램에서 효율적으로 이용할 수 있도록, 각 참여 노드들에게 순위를 부여하고 각 작업(Task)에 적절한 자원을 할당하여 전반적인 시스템 성능을 극대화시키는 메커니즘을 제안하였다. 각 노드의 순위는 처음 각 노드별 자원의 시스템 사양을 토대로 그룹화하여 작업을 배분하고 각 노드들이 작업을 마친 후 반환 값의 정확도와 응답시간과 같은 동적 요소를 고려하여 참여자의 순위를 부여하였고, 이러한 순위에 따른 작업 재분배 메커니즘은 전체적인 시스템 성능을 향상시키고 정확도를 높인다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.04a
• /
• pp.631-633
• /
• 2004

고속 네트워크의 등장으로 관리 영역을 초월한 계산 자원의 공유가 가능하게 되었다. 유휴 상태에 있는 자원들의 자발적인 참여로 인한 자원 제공은 네트워크로 상호연결된 컴퓨터 시스템 즉, 그리드 컴퓨팅을 가능하게 하였다. 그리드 환경에 포함된 각 자원들은 이질적이고, 이질적인 자발적 참여 자원들에게는 자원의 참여 결과로서 나타나는 신인도라는 차원에서 적절한 보상이 제공되어야 한다. 본 논문에서는 그리드 컴퓨팅에서 각 노드들이 자발적인 협력체계에 참여하여 얻게되는 결과인 신인도에 따라 보상을 받을 수 있는 기술을 연구하고 그 타당성을 검토한다. 각 노들들이 작업을 하기전 시스템 정보인 정적정보와 주어진 직업을 마친 후 반환 값의 정확도와 응답시간과 같은 동적정보를 고려하여 얻게된 신인도를 고려하여 발런티어에게 피드백을 제공하는 보상체제를 구축한다. 신인도에 따른 보상체제는 유휴 노드들의 자발적 참여율을 높이고 전반적인 시스템 성능을 향상시킨다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.2
• /
• pp.55-60
• /
• 2011

Most of neural network chips use an analog-type maximum selector circuit (MS). As the increase of integration level, the analog MS has difficulties in achieving sufficient resolution. Contrary, the digital-type MS is easy to get high resolution but slower than its analog counterparts. A new high-speed digital MS circuit called MSIT (Maximum Selector with Internal Trigger-signal) is presented in this paper. The MSIT has been designed to achieves both the high reliability by using trigger-signals and high speed by removing the unnecessary waiting times. The response time of MSIT is 3.4ns for 32 data with 10-bit resolution in the simulation with 1.2V, $0.13{\mu}m$-process model parameters, which is much faster than its analog counterparts. It shows that digital MS circuits like MSIT can achieve higher speed as well as higher resolution than analog MS circuits.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.10
• /
• pp.22-28
• /
• 1998

Signal transmission and crosstalk of coupled bondwires buried in plastic packages are analyzed using the Method of Moments and the Fourier Transform algorithm. It is also shown that the quasi-static crosstalk model of SPICE is inappropriate for designing the high-speed plastic packages. Plastic packaging material, increasing the self and mutual capacitances, is found to be helpful for the signal transmission integrity due to the dielectric compensation effect. However, it is also observed that the plastic material increases the crosstalk due to the radiation-enhanced mutual coupling effect. By investigating the geometrical and material dependence of the pulse transmission and crosstalk, it is found that the radiation-enhanced coupling effect is significant for most of typical bondwire geometries and plastic package materials. These calculation results can be effectively used for designing plastic packages of high-speed digital IC's and monolithic RFIC's.

• Journal of KIISE:Computer Systems and Theory
• /
• v.29 no.9
• /
• pp.503-513
• /
• 2002

Since CC-NUMA architecture has to access remote memory, the interconnection network determines the performance of the CC-NUMA system. Bus which has been used as a popular interconnection network has many limits in a large-scale system because of the limited physical scalability and bandwidth. The dual ring interconnection network, composed of high-speed point-to-point links, is made to resolve the defects of the bus for the large-scale system. However, it also has a problem, in that the response latency is rapidly increased when many nodes are attached to the snooping based CC-NUMA system with the dual ring. In this paper, we propose a ring architecture with repeater nodes in order to overcome the problem of the dual ring on a snooping based CC-NUMA system, and design a repeater node adapted to this architecture. We will also analyze the effects of proposed architecture on the system performance and the response latency by using a probability-driven simulator.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.26 no.1
• /
• pp.88-100
• /
• 1990

Since sea state changes engine load instantaneously, the speed governing apparatus is essential for marine engine to maintain constant speed regardless of the load. As governing apparatuses, mechanical, pneumatic, and electric governors have been employed. But, recently, according to the introduction of low speed-ling stroke engines to increase thermal efficiency, the development of governor which has better response characteristics is requisite. In this paper, to design the governor that meets above requirement, author made a performance test for the existing PID control digital governor with the aid of computer simulation, and investigated digital governor applying the optimal control algorithm, then, executed computer simulation by the same way. As the result of simulations, found that the former let engine have large overshoot and long settling time at low speed, on the other hand, the latter made engine have better response. If we design and invent a good observer for delay time element so that the optimal control theory can be applied, better governor will be expected.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.5
• /
• pp.2449-2456
• /
• 2013

The column-oriented database storage is a very advanced model for large-volume data analysis systems because of its superior I/O performance. Traditional data storages exploit row-oriented storage where the attributes of a record are placed contiguously in hard disk for fast write operations. However, for search-mostly datawarehouse systems, column-oriented storage has become a more proper model because of its superior read performance. Recently, solid state drive using MLC flash memory is largely recognized as the preferred storage media for high-speed data analysis systems. In this paper, we introduce fast column-oriented data storage model and then propose a new storage management scheme using a cross compressed replication for the high-speed column-oriented datawarehouse system. Our storage management scheme which is based on two MLC SSD achieves superior performance and reliability by the cross replication of the uncompressed segment and the compressed segment under high workloads of CPU and I/O. Based on the results of the performance evaluation, we conclude that our storage management scheme outperforms the traditional scheme in the respect of update throughput and response time of the column segments.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.8
• /
• pp.25-32
• /
• 2012

In this paper, we propose a method for improving the performance of low complexity LS channel estimation for OFDM in fast time varying channels. The CE-BEM channel model used for the low complexity LS channel estimation has a problem on its own and deteriorates channel estimation performance. In this paper, we first use time domain windowing in order to remove the effect of ICI caused by data symbols. Then samples are taken from the results of the LS channel estimation and the effects of the windowing are removed from them. For resolving the defect of CE-BEM, the channel responses are recovered by interpolating the resultant samples with DPSS employed as basis functions the characteristics of which is well matched to the time variation of the channel. Computer simulations show that the proposed channel estimation method gives rise to performance improvement over conventional methods especially when channel variation is very fast and confirm that not only which type of functions is selected for the basis but how many functions are used for the basis is another key factor to performance improvement.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.818-819
• /
• 2015

PAL-XFEL 장치에 사용 할 고전압 펄스 모듈레이터 출력파워는 수 ${\mu}s$ 범위의 짧은 고전압(400 kV), 대전류(500 A) 펄스를 요구한다. 이러한 펄스파워를 얻기 위해서 PFN(Pulse Forming Network)에 에너지를 축적하고, 플라즈마 스위치인 싸이라트론을 통하여 에너지를 신속하게 클라이스트론 쪽으로 전달한다. 클라이스트론은 모듈레이터에서 공급하는 펄스 전원을 이용하여 RF를 증폭하는 대출력 고주파 증폭장치이다. 고전압 펄스 모듈레이터 제어기는 고속펄스 신호처리 모듈(Fast Pulse Signal Conditioning Module), PLC(Programmable Logic Controller)로 구성되어 있다. 고전압 펄스 모듈레이터에 사용하는 대용량 싸이라트론은 고전력을 스위칭 할 때 발생하는 스위칭 노이즈는 매우 크다. 이러한 노이즈는 모듈레이터의 출력 시그널인 빔 전압, 빔 전류, EOLC(End of Line Clipper) 전류, DC high voltage에 섞여 있으면서 신호 왜곡 및 제어장치의 고장을 유발시킨다. 이처럼 노이즈가 많이 포함되어 있는 아닐로그 신호를 깨끗한 신호(a clean signal)로 바꾸어주는 노이즈 필터링 장치인 고속펄스 신호처리 모듈을 제작하여 실험한 결과를 알아보고 모듈레이터 인터록 시스템인 PLC에서 Dynamic Interlock의 응답시간을 빠르게 하기위한 회로 수정에 대한 결과에 관하여 기술하고자 한다.