• 제목/요약/키워드: 고속철도소음

검색결과 248건 처리시간 0.029초

능동소음제어기법을 이용한 고속철도 터널소음제어 (Reduction of Interior Noise for KTX in Tunnels Using Active Noise Control Techniques)

  • 남현도;안동준;최영훈
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2009년도 제40회 하계학술대회
    • /
    • pp.1927_1928
    • /
    • 2009
  • 한국철도공사의 조사에 의하면 KTX 이용 시 승객들이 느끼는 가장 불편한 점 중에 하나로 소음문제를 지적하고 있다. 특히 한국은 프랑스 등 유럽 국가와 달리 터널 구간이 차지하는 비중이 높아 터널 구간에서의 소음이 심각한 문제가 되고 있다. 본 연구에서는 KTX 터널 구간 운행 시 발생하는 소음을 능동소음제어 기법으로 제어하는 가능성을 알아보기 위하여 안정도가 강화된 IIR LMS 알고리즘을 이용하여 KTX 소음을 저감하는 능동소음제어시스템을 제안하고, 이를 이용하여 직접 측정된 KTX 소음을 제어하는 컴퓨터 시뮬레이션을 수행하였다.

  • PDF

고속열차 전두부 및 팬터그래프 공력성능 향상기술 연구 (Study on the Aerodynamic Advancements of the Nose and Pantograph of a High-Speed Train)

  • 노주현;구요천;윤수환;곽민호;박훈일;김규홍;이동호
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2008년도 추계학술대회 논문집
    • /
    • pp.416-421
    • /
    • 2008
  • 최근 세계 각국의 고속열차들은 속도 향상 측면에서 비약적인 발전을 보이고 있으며, 국내에서도 2007년부터 '차세대 고속철도 기술개발 사업'을 통해 최고속도 400km/h급의 고속열차 개발을 진행 중에 있다. 고속열차의 주행속도가 증가함에 따라 이전에는 제기되지 않았던 공기저항, 공력소음 문제, 열차의 교행 및 측풍에 의해 발생하는 압력변동, 터널출구에서 발생하는 미기압파 등의 문제들이 대두되고 있으며 이와 같은 문제들은 열차의 고속화를 제약하는 요인이 된다. 특히, 고속열차의 전두부 형상은 이러한 공기역학적 문제들과 밀접하게 연결되어 있으며, 팬터그래프의 소음 및 안정적인 집전 성능 확보 등도 속도 향상을 위해 반드시 고려해야하는 사항이다. 본 논문에서는 고속열차의 속도향상 노력의 일환으로 진행되고 있는 '공력해석 향상 기술'의 연구 내용과 더불어, 터널 미기압파 저감을 위한 전두부 형상 최적화 결과와 팬터그래프 공력성능 향상을 위한 강건 최적화 결과를 소개한다.

  • PDF

한국형고속열차 고속 궤도검측시스템 (High Speed Rail Measurement System of HSR-350x)

  • 김상수;박춘수
    • 한국철도학회논문집
    • /
    • 제11권2호
    • /
    • pp.115-119
    • /
    • 2008
  • 고속선에서의 궤도틀림은 차량의 주행 안정성 및 소음, 진동 등에 큰 영향을 끼치는 요소이다. 차량의 흔들림을 억제하고 효율적인 선로의 점검 및 관리를 위해서는 정확하고, 고속의 궤도검측기구가 요구되고 있는 실정이다. 본 논문에서는 국내 기술로 제작된 한국형고속열차에 고속 궤도검측시스템을 구축하고, 시운전 시험을 통하여 검측된 궤도 검측 결과를 검토하고자 한다.

철도 방진 슬라브 궤도의 동특성 해석 (Dynamic Analysis of Floating Slab Isolation System for Train)

  • 한현희;이규섭;장승엽;박만호
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2009년도 추계학술대회 논문집
    • /
    • pp.819-822
    • /
    • 2009
  • 환경 소음,진동 개선의 측면에서 철도 레일 하부로 전달되는 진동 및 구조소음을 효과적으로 차단하기 위하여 국내에서도 탄성 이산지지 구조의 플로팅 슬라브를 적용하는 경우가 증가하고 있다. 플로팅 슬라브 구조설계에 있어 주안점은 방진효율 증대와 슬라브 자체 중량의 2~3배 되는 열차 주행간의 동하중에 대한 열차 주행 안정성을 고려해야 하는 점이며 열차의 고속화 경향에 따라 동하중의 증가는 더욱 커지고 있다. 본 연구에서는 이산지지 방진장치를 적용한 철도 슬라브 궤도의 동특성과 이동질량에 의한 응답을 방진장치의 지지 간격, 스프링 상수 등을 설계변수로 하여 수치해석적 방법으로 시뮬레이션하였다.

  • PDF

KTX 와 새마을호의 실내소음에 노출된 인간의 뇌파 분석 (EEG Analysis of Human exposed to interior noise of KTX and Saemaul-ho)

  • 류수아;장윤석;박규칠
    • 동력기계공학회지
    • /
    • 제16권5호
    • /
    • pp.20-25
    • /
    • 2012
  • 오늘날 고속 철도는 중요한 교통수단으로 사용되고 있다. 주행거리 단축을 위해 직선 선로를 만드는 것이 불가피해 졌고 그에 따라 터널과 교량의 구간이 늘어나게 되었다. 특히 터널 통과 시에 발생되는 실내 소음은 운행 속도, 운행 구간 레일의 종류 등 여러 가지 원인에 의해 야기되어 진다. 실내소음으로 인해 철도를 이용하는 승객의 쾌적한 환경에 많은 영향을 미치게 된다. 이에 본 연구에서는 KTX와 새마을호의 터널 통과 시 발생되는 소음이 피험자에게 미치는 영향을 EEG를 통해 살펴보았다. 먼저 터널 통과 시 KTX와 새마을호의 실내 소음을 실제로 측정하여 크기, 주파수별로 분석하였다. 측정된 실내 소음을 피험자에게 제시하였을 때 나타나는 EEG를 측정하였다. EEG의 분석에 대해서는 불안, 긴장 등 스트레스를 받을 때 강하게 나타나는 ${\beta}$파의 변화를 관찰한 결과를 제시하였다.

400 km/h급 고속철도의 소음저감을 위해 방음벽 상부에 설치하는 소음저감장치 개발에 관한 연구 (A Study on the Development of a Noise Reduction Device Installed at the Top of Noise Barrier for the 400 km/h Class High-speed Railroad)

  • 윤제원;김영찬;장강석;홍병국;엄기영
    • 한국소음진동공학회논문집
    • /
    • 제23권9호
    • /
    • pp.823-830
    • /
    • 2013
  • The purpose of this study is to develop a noise reduction device installed at the top of noise barrier for further decreasing of noise level of 400 km/h class high-speed railroad. For this, the frequency spectrum of 400 km/h class high-speed railroad was analyzed through the field noise test, and the tuning frequency was determined to design a noise reduction device. The noise reduction device was designed to have noise reduction performance of at least 3 dB(A) using the prediction method(2D BEM) and through the laboratory test with the prototype. Finally, the outdoor test showed that this device could decrease noise level of 400 km/h class high-speed railroad even more than 3 dB(A).

고속철도의 소음 특성과 전파현상 (Highspeed Train : Sound Power and Noise Propagation Characteristics)

  • 김정태;은희준
    • 소음진동
    • /
    • 제6권3호
    • /
    • pp.349-355
    • /
    • 1996
  • For a rail traffic noise, a typical source has a length of 200m - 400m so that the noise pollution areas have been located in the transition regions where the sound level drops between 3dB/dd and 6dB/dd. Therefore, in this region, parameters such as a horizontal distance from the track, the geometry of the ground surface, the environmental effect, and the boundary impedance condition play import roles, especially in our nation's situation. In this study, modelling techniques for the finite length of noise source have been investigated in order to evaluate the rail traffic noise level. Then. noise correction value .${\Delta}$SPL for various location in the track region is represented by the non-dimensionalized horizontal and parallel distance from the track. As an application, a high speed train is examined. Beas on the noise data measured for a Eurostar in France, the sound power value per unit length $H_1$is calcuated. It turns out that$H_1$is 109 dB. Overall sound power from the highspeed train to be serviced in our country is expected to 135 dBA.

  • PDF

고속철도 차량의 스커트 장착에 의한 실내.외 소음 영향 분석 (The Noise Effect of a Skirt on Rolling-stock)

  • 김태민;김정태;김정수
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2012년도 춘계학술대회 논문집
    • /
    • pp.499-504
    • /
    • 2012
  • The high-speed train enjoys widespread acceptance as environment-friendly means of medium- to long-distance transportation. The pursuit of higher speed and lighter weight in railroad vehicles has engendered higher noise level. In particular, the environmental noise places many restrictions in the operation of high-speed railroad vehicles. This research investigates the effect of installing a skirt onto a high-speed train bogie with the top speed of 400 km/hr and using High Speed EMU for the purpose of reducing the environmental noise. In order to analyze the effect of the interior noise and environmental noise due to installation of the skirt, sound level is calculated using the Ray method and Statical Energy Analysis method. The numerical calculation predicts a reduction of approximately 2 dB in the environmental noise level, but at the cost of increase of approximately 2.5 dB in the interior noise level of the vehicle.

  • PDF