• Journal of Korea Multimedia Society
• /
• v.6 no.1
• /
• pp.105-113
• /
• 2003

In CDMA cellular system, inefficient Channel assignment for high-speed mobile host increase call blocking probability For it has been method proposed to guarantee QoS upon tn the speed of hierarchical cell that is allocated Queues and dedicated channels of high speed mobile host's speed. In this paper, We allocated the dedicated channel of high-speed handoff In FA (Foreign Agent), only if the receive signal strength of mobile host in current cell that there is low traffic in HA (Home Agent). also, we created new Circular queue LiFA (Limited Foreign Agent) for high-speed handoff call that signal strength is weak in certain FA, and had this High-speed handoff call to be ready for Life time to the new Circular queue LiFA. Thus improve the rate of the forced call termination.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.1
• /
• pp.84-89
• /
• 2007

In order to design and test an SoC modem for high speed communication, the platform with the architecture of such high speed communication is needed. That platform is needed for testing large data in speed of 500Mbps. This paper shows that transmission data can be uploaded and downloaded by 250Mbps between a virtual modem target board and a PC through the AHB-PCI IP and the speed of based on DPRAM and PCI.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.40 no.6
• /
• pp.87-94
• /
• 2003

This paper presents results of the development of the turbo generator system with structure which is HSG(High Speed Generator) installed directly to gas-turbine engine. Turbo generator with a high speed motor-generator directly has many advantages aspects of weight, size, lubrication system and complexity of the system compared of conventional turbo generator system with a gear box. But because of direct high speed operation of the high speed generator, we have to need stable high speed motor driving algorithm for perfect engine ignition when engine start. Also we have to need the design of the Power conditioning unit(PCU) for converting high speed AC output power to conventional AC power or needed DC power.

• Proceedings of the KIEE Conference
• /
• 2004.04a
• /
• pp.278-280
• /
• 2004

판토그라프는 전차선(catenary)으로부터의 전류를 차량에 전달하는 장치로서 전동차 지붕 위에 설치되어 있다. 판토그라프의 설계 목표는 고속 및 다양한 환경 조건하에서 연속적이고 일정한 량의 전류를 차량에 전달하도록 하는 것이다. 열차가 고속화될수록 전류의 흐름이 중단되는 이선, 접촉선과 판토그라프 집전판의 마모, 공력 소음 등이 큰 문제로 대두되며, 이들 문제들이 고속용 판토그라프의 설계 기술에서 중요시되고 있다. 특히 이선은 동력 전달이 중단될 뿐만 아니라 이선시에 발생하는 아크로 인한 마모 증대, 통신 장해를 일으킨다. 유럽과 일렬에서는 그러한 문제를 인식하고 고속용 판토그라프에 대한 연구를 활발히 진행하고 있다. 또한 저속전철이나 고속전철을 운행하는 나라에서는 기존의 가선계를 그대로 이용하면서 고속화를 달성하기 위하여 기존 가선계에 대한 최적의 판토그라프 설계에 노력을 기울이고 있다. 본 논문에서는 국내 기존선 고속화에 필요한 최고속도 180km/h급 틸팅차량시스템의 핵심 구성요소인 판토그라프 제어기술에 대한 연구를 통하여 보다 안전한 틸팅차량용 판토그프사양 개발하는데 목적이 있다.

• 전기의세계
• /
• v.39 no.1
• /
• pp.24-29
• /
• 1990

19세기초 영국에서 개발된 증기 기관차로 인하여 육상교통이 큰 변혁을 맞은 이래 열차의 속도, 승차감, 신뢰도 및 안전도, 경제성의 제고 등에 대한 계속적인 기술발전과 개량으로 철도 교통은 대량수송 수단의 주역으로 경제발전과 인류역사에 크게 공헌하여 왔다. 산업발전에 따른 고속화와 전철화로 철도차량의 최고속도는 프랑스의 고속전철(TGV)이 300km/h까지 도달했으나 고속주행시의 소음, 공해등으로 인하여 21세기 인류에게 제공될 지상의 대중교통수단으로서는 여러가지의 제한점을 보이고 있다. 최근 우리나라에서도 지속적이고 급속한 대중 교통수단으로서는 여러가지의 제한점을 보이고 있다. 최근 우리나라에서도 지속적이고 급속한 산업발전과 사회복지의 향상으로 국내의 산업물동량과 산업인구의 이동이 급격하게 증가하여 우리나라 산업동맥의 중추인 경부선의 경우 일일 수송능력은 120회/일 이르렀고 철도교통수요의 증가율('84년 예측치 5.9%년)과 특급이상의 승객증가율('84년 예측 12.5%)에 비추어 볼때, 1995년경에는 완전포화 상태에 도달할 것으로 예상되고 있다. 본 소고에서는 21세기 고도사회 진입에 대비하고 국민의 생활수준향상에 부응하는 빠르며, 쾌적하고, 안전한 고속 대중 교통수단으로써 관심을 불러 일으키고 있는 고속전철을 소개하고, 현재 운행하거나 개발중인 외국의 기술현황을 기술적인 면과 운용면에서의 고찰을 통하여 한국의 교통체제, 지형, 미래의 교통구조 등을 고려한 한국형 고속전철의 개발방향을 제시하고저 한다.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.1335-1337
• /
• 2003

한국형 고속 전철 과제는 6년의 과제 기간을 가시는 국가 연구 사업으로, 한국 실정에 적합한 차세대 고속 전철을 시험 제작하여 운용하는 것이 목적이다. 시속 350 km/h의 운행 속도를 목표로 하는 한국형 고속 전철은 현재 개발이 완료되어, 시험 주행 트랙에서 증속을 위한 시험 운행을 계속하고 있다. 한국형 고속 전철은 열차 내 각종 제어 장치들 간의 데이터 교환를 위해서 실시간 네트워크인 열차통신 네트워크(Train Communication Network; TCN)를 사용한다. 약 10년간의 표준 보완 기간을 거쳐서 1999년 국제 표준으로 확정된 TCN(IEC61373)은 열차 전용의 실시간 통신 네트워크로 열차 장치의 제어 및 진단에 적합한 다양한 기능과 특징을 가지고 있다. 한국형 고속전철은 열차의 주 제어 및 감시를 담당하는 주관 제어장치(SCU, Supervisory Control Unit)와 열차 안전에 중요한 역할을 하는 자동 열차 제어 장치(ATC, Automatic Train Control)을 포함하는 55개의 제어 장치들이 TCN으로 연결되어서 상호간의 데이터 교환을 수행하도록 구성되어 있다. 본 논문에서는 한국형 고속전철에 사용될 TCN의 구조와 실제 필드에 사용되어지기 위해서 필수적으로 필요한 네트워크의 고장 진단 기법에 대해서 설명한다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.7
• /
• pp.465-470
• /
• 2022

This paper studied the high-velocity impact behavior characteristics of metal materials by crosschecking the high-velocity impact analysis with the high-velocity impact experiment results of aluminul 6061. The coefficients of the Huh-Kang material model and the Johnson-Cook fracture model were calculated through quasi-static using MTS-810 and dynamic experimenting using the Hopkinson bar equipment for high-velocity impact analysis. The penetration velocity and shape were predicted through high-velocity impact analysis using the LS-DYNA. The resultes were compared with the experiment results using a high-velocit experiment equipment. It is intended to be used the containment evaluation research for aircraft gas turbine engine blade.

• Journal of the Korean Society for Railway
• /
• v.10 no.1 s.34
• /
• pp.23-37
• /
• 2007

Since 1964, HSR, which was opened in Japan, has had a hoge impact on the world. Historically, HSR has similar characteristics to the Roman Road, which promoted rapid movement and hada great influence on international society as transport infrastructure. Recently the development of HSR has become more rapid because of economic, environmental and external cost concern, emphasizing Environmentally Sustainable Transport(EST). In particular, the external cost has become more important factor for justifying HSR. The successful factors of HSR are high demand and cost minimal construction costs. There are two successful HSR models, the Japanese and the French. The former operates based on high demand oriented and the latter focuses on its minimizing costs. The demand orientated model means HSR carries over 100,000 passengers per day as in Japan and Far East Asian countries. The cost minimized model focuses on lower operation and construction costs as in France. In particular, Germany carries both passengers and freight on HSR. The construction costs in Germany are in between those of Japan and France. In future, Korea, Taiwan and China HSR will follow Japan's successful model because of high population density and concentration of economic activity along railway lines. This paper supports Vickerman's argument that HSR is justified where there is a demand of between 12 million and 15 million railway passenger a year(about 40thousand persons/day) between two urban center. This will be shown in the future in Korea, in Taiwan and China. Finally, this paper reviews that HSR activates at 250km/h for dedicated new lines and 200km/h for upgraded lines. In particular, it is successful in area of high population density and cost minimizing technology.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.880-887
• /
• 2020

This study was conducted to investigate the running stability of a high-speed train operated in a tunnel and an open field when external forces such as wind pressure and train crossings were applied to the vehicle. With no external force, the running stability at 400 km/h was examined, and the wheel weight reduction ratio, lateral pressure of the axles, and derailment coefficient satisfied the criteria of the technical standards for a high-speed train. When the distance between the centers of the tracks is 4.6 m, the external force caused by train crossing slightly affects the lateral acceleration of the vehicle but does not significantly affect the wheel weight reduction rate, lateral pressure, and derailment coefficient in a tunnel and open filed. When the distance is 4.6~5.0 m, the wheel weight reduction ratio, lateral pressure, and derailment coefficient satisfy the criteria with 20 m/s wind. When the wind speed was 30 m/s, the derailment coefficient satisfied the criteria, and the other variables exceeded them. It is predicted that a high-speed train can be operated safely at 400 km/h with wind speed of up to 20 m/s, and it should be slowed down at a wind speed of 30 m/s.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.4D
• /
• pp.565-571
• /
• 2006

This study aimed to analyze access mode choice behavior for KTX Passengers. To fulfill the aims of this study, Dong-Daegu Station was selected as a station for a case study. This study takes place in two stages. These are (i) descriptive statistical analysis of transportation status before and after introduction of the KTX, (ii) empirical model estimation for analyzing access mode choice behavior. This study makes use of the data from travel survey from Daegu metropolitan area. The main part of the survey was carried out in the KTX Dong-Daegu station. The data was collected from a sample of 1,800 individuals. The survey data includes the information on travel from Dong-Daegu station to Seoul. From descriptive statistical analysis of transportation status before and after introduction of the KTX, it is found that revealed demand of the KTX is lower than that expected. Moreover, it is found that the low demand of the KTX stems from high cost for the KTX itself and inconvenience( including travel time and cost) of access mode. In order to analyze mode choice behavior for accessing Dong-Daegu station, multinomial logit model structure is used. For the model specification, a variety of behavioral assumptions about the factors which affect the access mode choice, were considered. From the empirical model estimation, it si found that access travel time and access travel cost are significant in choosing access mode. Given the empirical evidence, we see that improvement of access transportation system for Dong-Daegu station is very important for enhancing the use of KTX.