• Journal of Korean Society of Transportation
• /
• v.35 no.4
• /
• pp.278-291
• /
• 2017

Effective installation and operations of traffic safety signs in the advance warning area is of considerable interest for safer traffic management at freeway work zones. This study evaluated the feasibility of traffic safety sign installation based on a driving simulation experiment to take drivers' responsive characteristics into consideration. Both the compliance rate for speed limit and a lane-changing safety index were used for evaluating a set of driving simulation scenarios. It was identified that providing speed limit signs to reduce speed in advance and afterward guiding lane-changing could lead to safer maneuvering of vehicles entering work zones. The outcomes of this study are expected to be useful for revising freeway work zone management policies toward crash prevention.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.5
• /
• pp.75-82
• /
• 2021

The number of traffic accidents is about 230,000, and due to non-recurring congestion and high driving speed, the number of deaths per traffic accident on freeways is more than twice compared to other roads. Currently, traffic information is provided based on nodes and links using the centerline of the road, but it does not provide detailed speed information. Recently, installing sensors for vehicles to monitor obstacles and measure location is becoming common not only for autonomous vehicles but also for ordinary vehicles as well. The analysis using large-capacity location-based data from such sensors enables real time service according to processing speed. This study presents an mapping method for individual vehicle data analysis based on space. The processing speed of large-capacity data was increased by using method which applied a quaternary notation basis partition method that splits into two directions of longitude and latitude respectively. As the space partition was processed, the average speed was similar, but the speed standard deviation gradually decreased, and decrease range became smaller after 9th partition.

• Journal of Korean Society of Transportation
• /
• v.25 no.4
• /
• pp.7-19
• /
• 2007

The purpose of posted speeds is to provide a speed that ensures the safety of vehicle flow according to given road situations. Because of this, posted speeds must be carefully examined, and posted speeds at freeway exits and entrances in particular should consider car characteristics. Posted speeds at freeway exits and entrances must take changing speeds due to curve radiuses into consideration and in this study, an 85th percentile speed becomes the most important element to consider. When it is considered that most traffic accidents occur because of variations in speed between cars, posted speeds should be set after considering car traveling characteristics. Within these dimensions, instead of putting significance on an upper direction regulation or lower direction regulation, speed distributions which fit to the characteristics of each road should be fully considered. Accordingly, this study evaluated appropriate posted speeds that will reduce the dangers of traffic accidents through posted speed regulations of roads now in operation by offering a posted speed setting method theory, using entries at Yangji, Yongin, and Cheongwon interchanges as subjects.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.5D
• /
• pp.467-476
• /
• 2010

Travel delay (TD) denotes a time difference between the running time of vehicle with a normal speed and the travel time of vehicle with a reduced speed for traversing the same segment of roadway, and is sometimes used as a measure of time delayed in the junction or bottleneck areas of roadway. Urban freeways in the foreign countries are often suffering from traffic delay within the entrance and exit ramp junction influence areas, as a freeway with the speed limit of 80 km/h or higher only during the rush hours, but those in our country are especially experiencing severe traffic delay on the mainline segments as well as within the entrance and exit ramp junction influence areas, as a freeway with the speed limit of 80 km/h or less regardless of the rush hours. So, the purpose in this study is to develop the models that could predict the travel delay within the ramp junction influence areas of urban freeway having the geographical features which differ from the expressway, and also examine the validity of the travel delay predictive models developed.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2002.05a
• /
• pp.785-791
• /
• 2002

본 연구에서는 자동차의 안락성에 큰 영향을 미치는 운전자세와 운전에 따른 피로도를 평가하는 방법에 대해 다루고자 한다. 이러한 피로도를 평가하기 위해서 EMG, ECG와 같은 생리신호를 이용한 정량적인 평가방법과 졸림감 주관적 피로도 등과 같은 정성적인 평가방법을 동시에 수행하였다. 본 실험은 실제 차량에서 동일탄 구간을(호남고속도로 대전-정읍)을 왕복 주행하면서 수행되었으며, 실험에 참여한 인원은 콩 6명이었다. 실험 결과 운전시간이 증가함에 따라 근육의 피로가 증가하는 것을 볼 수 있었으며, 동시에 졸림감 또한 증가하였다. 운전 자세에 따른 피로도의 평가 결과 졸림감이 중요한 요인으로 나났는데, 이는 안락한 운전자세 뿐만 아니라 안전한 운전을 위해서도 아주 중요한 요인이라 생각된다. 본 연구는 실제 차량을 통탄 피로도의 편가를 하는데 있어서 피로를 평가하는 방법에 대탄 가이드로써 그 역할이 중분하리라 생각이 되며. 무엇보다도 실제 차량에서 실험한 결과 샘플수가적기 때문에 객관적인 결과라고 말하기엔 어렵겠지만, 운전 자세에 따라서 유의한 자이를 보였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.2
• /
• pp.397-407
• /
• 2017

This study investigated current status of rest area for drowsy drivers on the highways and drew the related issues to define specifications and design criteria regarding expressway rest area for drowsy drivers on the highways. Based on the investigation result, geometric structure specifications and improvement plans are suggested. The entry part of a rest area for drowsy drivers on the highways was divided into deceleration transition section, deceleration lane and entry connection road while the exit part was divided into exit connection road, acceleration lane and acceleration transition section. The optimum length was estimated by considering the main lane vehicle traveling speed, traveling speed at the beginning/end point of entry/exit connection roads, deceleration and acceleration. In addition, reasonable design criteria were suggested by dividing the parking section of rest area for drowsy drivers according to parking style and cross-section composition, and length of parking space and then considering the ratio of vehicles using rest area for drowsy drivers, the ratio of heavy vehicles, and the design speed within a rest area for drowsy drivers. It is believed that the suggested design criteria on rest area for drowsy drivers on the highways can be utilized in the future planning and maintenance of rest area for drowsy drivers. Additionally, the defined criteria on installing rest area for drowsy drivers on the highways will prevent traffic accidents in resting facilities and highways as well as improve usage and safety of them.

• Journal of Korean Society of Transportation
• /
• v.20 no.6
• /
• pp.115-128
• /
• 2002

Traffic engineers have developed and implemented various microscopic simulation models to verify the traffic performance and to prevent the expected problems. The existing microscopic simulation models categorize drivers into several types to reflect various drivers' driving patterns but miss the dynamics of drivers' behavior changed based upon the traffic conditions. It was found from the field data collected from two different merging sections on an urban freeway in Seoul, Korea, that the drivers' critical gap distributions are changed based on (1) the traffic density on the adjacent lane to the acceleration lane and (2) the opportunities left to merge in terms of distance to the end of acceleration lane. It was also found from the study that the drivers' critical gap distributions follow the Normal distribution. and its mean and variance change while a vehicle progresses on an acceleration lane. This paper proposes a new gap-acceptance model developed based on a set of drivers' critical gap distributions from each segment on the acceleration lanes. Through the comparison study between the field data and the results from the simulation utilizing the proposed model, it was verified that (1) the distribution of merging points on an acceleration lane to the adjacent main lane at different density levels, (2) the size of the gap accepted for merging and (3) the speed difference between the merging vehicle and the trailing vehicle at the time of merging are statistically identical to the field data at 95% confidence level.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.14 no.3
• /
• pp.9-23
• /
• 2015

A lane change maneuver which has a high driver cognitive workload and skills sometimes leads to severe traffic accidents. In this study, the Advanced Lane Change Assist System (ALCAS) was developed to assist with the automatic lane changes in merging sections which is mainly based on an automatic control algorithm for detecting an available gap, determining the Optimal Lane Change Start Point (OLCSP) in various traffic conditions, and positioning the merging vehicle at the OLCSP safely by longitudinal automatic controlling. The analysis of lane change behavior and modeling of fundamental lane change feature were performed for determining the default parameters and the boundary conditions of the algorithm. The algorithm was composed of six steps with closed-loop. In order to confirm the algorithm performance, numerical scenario tests were performed in various surrounding vehicles conditions. Moreover, feasibility of the developed system was verified in microscopic traffic simulation(VISSIM 5.3 version). The results showed that merging vehicles using the system had a tendency to find the OLCSP readily and precisely, so improved merging performance was observed when the system was applied. The system is also effective even during increases in vehicle volume of the mainline.

• 한국방재학회:학술대회논문집
• /
• 2010.02a
• /
• pp.89.2-89.2
• /
• 2010

고속도로에서 주행속도가 높아지게 되면, 도로의 노면 상태에 따라 차량의 안전과 쾌적한 운전자의 환경이 변화될 수 있다. 이처럼 도로의 노면 상태를 결정하는 주된 인자는 도로의 평탄성과 소성변형에 의한 노면의 요철이라고 할 수 있다. 평탄하지 못한 도로를 자동차가 고속으로 주행하게 되면, 자동차의 속도에 의한 도로와의 마찰이 발생하여 자동차에는 매우 큰 흔들림이 발생하게 된다. 또한, 도로의 경우에도 자동차의 차축과 도로면에서 발생하는 충격에 의해 미세한 진동이 발생하게 된다. 그리고 광섬유 브래그 격자(FBG)센서는 외부에서 작용하는 매우 미세한 물리량에 의한 변화의 측정이 가능한 매우 우수한 계측 센서로 사용이 가능하기 때문에 온도보상형 광섬유진동센서를 제작하였고, 이를 고속도로 포장면의 평탄성 모니터링에 활용하고자 하였다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.791-794
• /
• 2010

고속도로에서 주행속도가 높아지게 되면, 도로의 노면 상태에 따라 차량의 안전과 쾌적한 운전자의 환경이 변화될 수 있다. 이처럼 도로의 노면 상태를 결정하는 주된 인자는 도로의 평탄성과 소성변형에 의한 노면의 요철이라고 할 수 있다. 평탄하지 못한 도로를 자동차가 고속으로 주행하게 되면, 자동차의 속도에 의한 도로와의 마찰이 발생하여 자동차에는 매우 큰 흔들림이 발생하게 된다. 또한, 도로의 경우에도 자동차의 차축과 도로면에서 발생하는 충격에 의해 미세한 진동이 발생하게 된다. 그리고 광섬유 브래그 격자(FBG)센서는 외부에서 작용하는 매우 미세한 물리량에 의한 변화의 측정이 가능한 매우 우수한 계측 센서로 사용이 가능하기 때문에 온도보상형 광섬유진동센서를 제작하였고, 이를 고속도로 포장면의 평탄성 모니터링에 활용하고자 하였다.