• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2014.11a
• /
• pp.15-17
• /
• 2014

본 논문에서는 하드웨어의 제한된 자원을 이용하여 HEVC 코덱을 구현할 때 DCT 와 엔트로피 부호화를 사용하지 않고 율 및 왜곡값을 예측하여 고효율의 부호화를 수행하는 방법에 대하여 제안한다. HEVC 는 기존의 부호화기에 비하여 계층적 부호화 구조와 함께 큰 블록 크기를 갖는 DCT 와 엔트로피 부호화를 반복적으로 수행하기 때문에 하드웨어 구현 시 그 복잡도가 매우 크게 증가한다. 먼저 DCT 는 하다마드변환 행렬과 또 다른 정규 직교 변환 행렬의 곱으로 표현될 수 있는 성질을 이용하여 부호화 변환 시 생성된 하드마드변환 행렬에 저복잡도의 정규 직교 변환 행렬을 곱하여 DCT 변환 계수를 생성한 후 변환 및 양자화를 수행한다. 왜곡값의 경우, 이 때 생성된 양자화 계수와 변환 계수 간의 차이를 변환도메인에서 제곱합을 이용하여 계산하여 역변환을 생략함으로써 복잡도를 감소시킬 수 있다. 또한 텍스처에 대한 비트율 예측은 각 CU 블록내의 양자화 계수의 수를 더하여 계산하여 엔트로피를 수행하지 않고 예측할 수 있다. 그리고 비 텍스처에 대한 비트율 예측의 경우 움직임벡터의 비트에 대한 Pseudo CABAC 코드를 수행하여 예측할 수 있다. 이러한 저 복잡도의 텍스처 및 비텍스처 비트와 왜곡을 예측함으로써 하다마드변환만을 이용하여 부호화하였을 때에 비해 최대 33%의 비트율 감소를 얻을 수 있었다.

• Analytical Science and Technology
• /
• v.12 no.4
• /
• pp.312-317
• /
• 1999

Quality control was carried out the three analytes, BOD, COD, TN, TP of high and low concentration for thirteen laboratories. Evaluation values of Quality control was determined from average value which were made by six times test, repeatedly and periodically. This value had not only error ratio of within 5% from prepared sample value but also high precision of standard deviation, 0.44 (BOD, low concentration), 2.15 (BOD, high concentration), 0.12 (COD, low concentration), 1.63 (COD, high concentration), 0.35 (TN, low concentration), 1.99 (TN, high concentration), 0.05 (TP, low concentration), 0.14 (TP, high concentration). Upper (Lower) Warning Limit (ULWL) and Upper (Lower) Acceptance Limit (ULAL) values made from quality control chart. Three (5.30, 9.70, 5.30 mg/L) and five laboratories were over ULAL value in low and high BOD concentration, respectively. Two (41.00, 30.60 mg/L) and four laboratories were over ULAL value in low and high COD concentration, respectively. while, other eleven laboratories appeared reliable data. One laboratory (0.70 mg/L) was over ULAL at low TN concentration, while other eleven laboratories had reliable values. In case of high TN concentration, eleven laboratories were over ULAL value, it should be focuced for improvement of reliability about measurement and analysis of TN. Four (1.14, 0.45, 0.64, 1.49mg/L) and seven laboratories were over ULAL in low and high TP concentration, respectively.

• Radiation Oncology Journal
• /
• v.12 no.2
• /
• pp.243-252
• /
• 1994

The use of high dose rate remote afterloading system for the treatment of intraluminal lesions necessitates the need for a more accurate of dose distributions around the high intensity brachytherapy sources, doses are often prescribed to a distance of few centimeters from the linear source, and in this range the dose distribution is very difficult to assess. Accurated and optimized dose calculation with stable numerical algorithms by PC level computer was required to treatment intraluminal lesions by high dose rate brachytherapy system. The exposure rate from sources was calculated with Sievert integral and dose rate in tissue was calculated with Meisberger equation, An algorithm for generating a treatment plan with optimized dose distribution was developed for high dose rate intraluminal radiotherapy. The treatment volume becomes the locus of the constrained target surface points that is the specified radial distance from the source dwelling positions. The treatment target volume may be alternately outlined on an x-ray film of the implant dummy sources. The routine used a linear programming formulism to compute which dwell time at each position to irradiate the constrained dose rate at the target surface points while minimizing the total volume integrated dose to the patient. The exposure rate and the dose distribution to be confirmed the result of calculation with algorithm were measured with film dosimetry, TLD and small size ion chambers.

• Korean Journal of Poultry Science
• /
• v.29 no.2
• /
• pp.117-124
• /
• 2002

Betaine functions as an osmoregulators in the cells and its inclusion in diet can spare the choline and carcass fat reduction in chicken. Thus, two hundred eighty eight laying hens were fed with 0, 500, 1,000, 2,000 ppm of betaine from seventy eight to eighty six weeks of age during the environmentally high temperature stress. Com and soybean basal diets contained 2,800 kcal/kg ME and 16% CP. Egg production, feed intake, and feed conversion were examined for eight weeks. Egg quality characters, serum cholesterol, liver betaine, and lower ileal osmolality were measured at the end of experiment. Egg Production rates of hens fed with 500 or 2,000 ppm of betaine were 75.06 and 75.02%, respectively and tended to increase compared to the control. The feed conversion(FCR) of these treatments was significantly(P<0.05) improved compared to that of control although it did not significantly differ in the e99 Production rates between 500 and 2,000 ppm of betain groups. Eggshell breaking strength of hens fed betaine was significantly(P<0.05) higher than those of control. However, betaine supplements did not influence to improving the albumen height and Haugh unit. Liver betaine in hens fed with betaine was linearly increased unto 2,000 ppm. The birds fed with 2,000 ppm betaine showed significantly(P<0.05) higher in the liver betaine than the control birds. Total cholesterol and triglyceride tended to be increased by dietary betaine supplement. The lower ileal osmolality in betaine supplement group tended to be slightly decreased. As a result, dietary betaine supplement tended to improve the egg Production and eggshell Quality in laying hens during heat stress.

• Journal of the Korea Concrete Institute
• /
• v.19 no.3
• /
• pp.377-383
• /
• 2007

In recent years the field application of high performance concrete has been increased to improve the quality and reliability of concrete structures. The mix design of the high performance concrete includes the 2 set-off mixture theory of mortar and coarse aggregate and that of paste and aggregate. The 2 set-off mixture theory of mortar and coarse aggregate has a problem of having to determine its value through repeated experiments in applying the rheological characteristics of mortar. The 2 set-off mixture theory of paste and aggregate has never been applied to high performance concrete since it doesn't take into account the relationship between optimum fine aggregate ratio and unit volume of powder nor does it consider the critical aggregate volume ratio. As the mixture theory of these high performance concretes, unlike that of general concrete, focuses on flowability and charge-ability, it does not consider intensity features in mix design also, the unit quantity of the materials used is determined by trial and error method in the same way as general concrete. This study is designed to reduce the frequency of trial and error by accurately calculating the optimum fine aggregate ratio, which makes it possible to minimize the aperture of aggregate in use by introducing the maximum density theory to the mix design of high performance concrete. Also, it is intended to propose a simple and reasonable mix design for high performance concrete meeting the requirements for both intensity and flowability. The mix design proposed in this study may reduce trial and error and conveniently produce high performance concrete which has self-chargeability by using more than the minimum unit volume of powder and optimum fine aggregate with minimum porosity.

• Korean Journal of Optics and Photonics
• /
• v.7 no.4
• /
• pp.397-402
• /
• 1996

A compact excimer laser was developed with coaxial type which the one line cross flow fan is only used. At 1 kHz repetitive operation, average power of KrF laser is 56 watt. In this paper, Design parameter and CR characteristic are investigated for attainment of the compact 1 kHz excimer laser. We have obtained overall efficiency of 1.2% with KrF laser gas. At this time, CR and the variation of laser output are 2.97, $\pm$9%. Laser gas volume and active volume are 10 liter, 1.8(H)$\times$1.2(W)$\times$30(L)=64.8 ㎤, respectively.

• Korean Journal of Poultry Science
• /
• v.14 no.1
• /
• pp.1-8
• /
• 1987

Three experiments were conducted to investigate effects of dietary energy and protein levels on performance of laying hens. A total of 360 hens each of 352-day old Manina Brown (Exp.1), 280-day old Brown Warren (Exp.2) or 3174ay old Brown Warren (Exp.3) was divided into 20 pens of 18 birds. Each pen was assigned to one of the four dietary treatments with 5 replications according to a 2${\times}$2 factorial design, consisting of all possible cominations of two levels of metabolizable energy (2,500 and 2,800 kcal/kg of diet) and two levels of crude Protein (13 and 16%). All hens were housed two birds per cage. Exp.1 and 2 were conducted for four weeks and hens were fed experimental diets ad libitum, and Exp.3 lasted two weeks and feed consumption was restricted to 130g/hen/day. In Exp.1 and 2, increasing either energy or protein level in the diet numberically improved egg production. However, in Exp. 3, where feed consumption was restricted, egg Production was affected significantly 〈0.05) by the energy levies and numerically by the protein levels. Neither protein nor energy level influenced egg weight in Exp. 1 and 2, but in Exp. 3 the higher level of energy improved egg weight numerically, In all three experiments increasing either protein or energy level increased egg mass. Higher levels of either protein and energy tended to decrease feed consumption and improve feed conversion rate numerically. It should also be noted that the higher level of energy improved egg mass produced per unit intake of protein and the higher level of Protein improved egg mass produced per unit intake of energy.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.10
• /
• pp.366-373
• /
• 2019

Combat uniforms require higher tensile and tear strength than civilian products, and applied infrared reflectance from the recently developed nighttime fluoroscopy equipment to ensure combatant survival at night. Unlike other uniforms for civilian use, combat uniforms require durability against laundering because they may not be supplied again, once originally provided. Therefore, this study examined the changes in strength and changes in infrared reflectance after multiple washing of combat uniforms. The experiment confirmed that the strength change after the washing of combat uniforms 15 times was maintained in the same manner as the result after washing five times. In the case of infrared reflectance, the difference in reflectance after multiple washing treatments was greater than that in the case where washing was not performed. Therefore, although the durability in the case of combat uniforms is strong, it is necessary to maintain a reflectance higher than a certain level through the development of materials and the development of dyes.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.4
• /
• pp.446-460
• /
• 2022

In this paper, we propose an algorithm to improve target detection rate degradation due to direct blast in a bi-static sonar systems with high duty cycle using an adaptive filters. It is very important to suppress the direct blast in the aforementioned sonar systems because it has a fatal effect on the actual system operation. In this paper, the performance was evaluated by applying the Normalized Least Mean Square (NLMS) and Recursive Least Square (RLS) algorithms to the simulation and sea experimental data. The beam signals of the target and direct blast bearings were used as the input and desired signals, respectively. By optimizing the difference between the two signals, the direct blast is removed and only the target signal is remained. As a result of evaluating the results of the matched filter in the simulation, it was confirmed that the direct blast was removed to the noise level in both Linear Frequency Modultated (LFM) and Generalized Sinusoidal Frequency Modulated (GSFM), and in the case of GSFM, the target sidelobe decreased by more than 20 dB, thereby improving performance. In the sea experiment, it was confirmed that the LFM reduced the level of the transmitted direct wave by 10 dB, the GSFM reduced the level of the transmitted direct wave by about 4 dB, and the side lobe of the target decreased by about 4 dB, thereby improving the performance.

• Journal of the Korea Concrete Institute
• /
• v.20 no.1
• /
• pp.13-22
• /
• 2008

The initiation and growth processes of cyclic ice body in porous systems are affected by the thermo-physical and mass transport properties, as well as gradients of temperature and chemical potentials. Furthermore, the diffusivity of deicing chemicals shows significantly higher value under cyclic freeze-thaw conditions. Consequently, the disintegration of concrete structures is aggravated at marine environments, higher altitudes, and northern areas. However, the properties of cyclic freeze-thaw with crack growth and the deterioration by the accumulated damages are hard to identify in tests. In order to predict the accumulated damages by cyclic freeze-thaw, a regression analysis by the response surface method (RSM) is used. The important parameters for cyclic freeze-thawdeterioration of concrete structures, such as water to cement ratio, entrained air pores, and the number of cycles of freezing and thawing, are used to compose the limit state function. The regression equation fitted to the important deterioration criteria, such as accumulated plastic deformation, relative dynamic modulus, or equivalent plastic deformations, were used as the probabilistic evaluations of performance for the degraded structural resistance. The predicted results of relative dynamic modulus and residual strains after 300 cycles of freeze-thaw show very good agreements with the experimental results. The RSM result can be used to predict the probability of occurrence for designer specified critical values. Therefore, it is possible to evaluate the life cycle management of concrete structures considering the accumulated damages due to the cyclic freeze-thaw using the proposed prediction method.