• Elastomers and Composites
• /
• v.43 no.4
• /
• pp.264-270
• /
• 2008

$\alpha$-D-mannosyl fullerene[$C_{60}$]-functionalized gold nanoparticle films were selfassembled using the layer-by-layer method on the reactive of glass slides functionlized with 3-aminopropyltrimethoxysilane. The functionalized glass slides were alternately soaked in the solutions containing $\alpha$-D-mannosyl fullerene[$C_{60}$] and 4-aminothiophenoxide/hexanethiolate-protected gold nanoparticles. $\alpha$-D-mannosyl fullerene[$C_{60}$]-functionalized gold nanoparticle films have grown up to 5 layers depending on the immersion time. The self-assembled nanoparticle films were characterized using UV-vis spectroscopy showed that the surface plasmon band of gold at 530 nm gradually became more evident as successive layers were added to the films.

• Archives of Plastic Surgery
• /
• v.38 no.4
• /
• pp.552-554
• /
• 2011

Purpose: Though its general usage, traditional tie-over dressing using suture has a few drawbacks such as difficulty in re-fixation after its opening especially when hematoma or seroma has occurred. It is rather difficult to maintain a stable dressing on curvy parts of body like flank, buttocks and that leads to unsatisfactory results of the surgery. Authors recommend a quick and repeatedly doable method, tie-over dressing that incorporates the usage of hooks and rubber bands. Methods: Debridement was done at a recipient site to be able to do skin graft. A right size of skin graft was prepared and placed upon the defect site with suture. Enough number of hooks were attached using Blue nylon at the normal skin of the edge of grafted area. We Applied dressing with ointment and fluffy gauze then fixed the dressing by attaching a rubber band at the hook to give a certain amount of tension. One or two days after the surgery, we opened the tie-over dressing and repeated the tie-over dressing by reusing the hooks and rubber band. Results: The skin grafts were all successfully taken and by repeating tie-over dressing using hooks and rubber, we could take the advantage of shortened the dressing time and eliminate the inconvenience of the patient and the surgeon by using bandages and fixing tapes. Conclusion: The advantage of tie over dressing using hooks and rubber bsnds are its easy re-doability early detection of probable complications, preventability of reoccurence of hematoma and seroma. Therefore, authors report this as considering the tie-over dressing using hooks and rubber bands is recommendable.

• Journal of Digital Convergence
• /
• v.16 no.12
• /
• pp.571-577
• /
• 2018

Bicycle riders complain of many inconveniences when wearing glasses, sunglasses and masks. The disposable fine dust mask has been developed to resolve such inconveniences of bicycle riders. The scope of research is limited to the fiber which generates one-time static electricity and the shape of the mask due to the characteristic of fine dust mask. The purpose is to design and make the fine dust mask with a simple production process. The new disposable fine dust mask has secured enough space of the mask in front of the mouth by longitudinal folding and minimized stuffiness by maintaining the shape of the folded part to prevent touching the mouth even by heavy breathing. The streamlined sponge is attached at the part of nose support and the area of the cheek has been expanded to be about 2.5cm wider than ordinary masks to improve tight seal at the side. In addition, a new disposable fine dust scarf mask has been developed to block ultraviolet rays for the face and neck while filtering fine dust with the tight fine dust mask.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.2
• /
• pp.379-386
• /
• 2023

When patients suffer from finger injuries, their finger joints can become stiff and inflexible due to decreased ability to exercise the finger tendons. This can lead to a loss of strength and difficulty using their hands. To address this, it is important to provide patients with consistent rehabilitation treatment that can help restore finger flexibility and strength simultaneously. In this study, we propose wearable gloves that use FSRs (force sensitive resistors) for finger strength training. The glove is designed to be adjustable using rubber bands and a custom PCB is designed for signal acquisition. For the evaluation of finger strength training, the result was analyzed in four cases. We suggest a vector that represents the center of five finger forces, and the result shows that the vector can indicate the level of force balance.

• Korean Journal of Optics and Photonics
• /
• v.28 no.5
• /
• pp.213-220
• /
• 2017

This paper proposes how to fabricate an educational Mach-Zehnder interferometer that is easy to align and inexpensive, using 3D printers and semiconductor lasers. The interferometer consists of a body $165mm{\times}120mm{\times}57mm$ in size, mirror mounts, a laser holder, beam splitters, and so on. The laser path is adjusted by 4 mirror mounts, each comprised of rubber bands, small metal wires, and a screw. The interference fringe is enlarged by the lens at the final stage. The refractive index of a slide glass was measured by counting the number of moving interference fringes while the slide glass, inserted into one of the two interferometer arms, is rotating. The formula for the refractive index as a function of the optical-path difference and rotation angle was obtained, and used to calculate the refractive index of glass from the interferometer experiment. The use of a rotating glass in one arm of the interferometer nullifies the need for a precision stage, which despite its high cost is often required to observe the moving interference fringe in the classroom. Therefore, the 3D-printed Mach-Zehnder interferometer proposed in this paper can be very useful for education, because of its affordability and performance. It enables students to perform both qualitative and quantitative studies using a 3D-printed interferometer, such as measuring the refractive index of a glass sample, and the wavelength of light.