• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.74.1-74.1
• /
• 2010

수치해석을 이용하여 형상 및 운전 조건에 따른 금속공기전지의 전기화학적 성능 변화를 조사하였다. 저전류밀도 영역에서의 전지 성능은 농도손실에 의한 영향이 미미하므로 활성화 손실과 저항손실만을 고려한 수치해서 모델을 적용하였다. 지배방정식은 전기전도식을 이용하였으며 전극 표면의 활성화손실을 모사하기위해 아연극(음극)에는 butler-volmer식을, 공기극(양극)에는 tafel식을 적용하였다. 실험결과와의 비교/분석을 통하여 수치해석 모델의 타당성을 검증하였다. 또한, 아연극과 공기극 사이의 간격과 전해질 농도 변화에 따른 아연공기전지 내부에서의 전류밀도분포를 조사하였으며, 분극곡선을 통해 전기화학적 성능을 평가하였다.

• Journal of the Korea Concrete Institute
• /
• v.26 no.3
• /
• pp.299-306
• /
• 2014

Coating is one of the methods used to solve the problem of corrosion of reinforcement in concrete structures. There are few research reported in the literature regarding the effect of zinc-coating on flexural behavior compared to epoxy coating. The objective of this study was to determine whether zinc-coated rebar adversely affects flexural behavior. Concrete beams reinforced with black or zinc-coated steel were tested in flexure. The test variables included the presence of rebar surface coating with zinc, steel ratio used and cover depth. The study concentrated on comparing crack pattern, crack width, deflection and strain. The ultimate flexural capacity of beams reinforced with zinc-coated bars was not different from that of black steel reinforced beams. The results from deflection and crack width measurements were indicative of no significant variation for the different rebar surface conditions. In addition, it was found that load-strain curve of beam reinforced with zinc-coated steel was similar to that of beam reinforced with zinc-coated steel. Therefore, the test results indicated that the use of zinc-coated rebar had no adverse effect on flexural behavior compared to the use of black rebar.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.4
• /
• pp.136-143
• /
• 2015

Galvanizing is one of the method used to solve the problem of corrosion of reinforcement in concrete structures. There few research reported in the literature regarding the effect of galvanized coating on the behavior of lap splices in concrete beams. The objective of this study was to determine whether galvanized rebar adversely affects lap splice behavior and bond strength. Concrete beams reinforced with black or galvanized rebar were tested in flexure. The test variables included the presence of galvanized rebar steel diameter, and lengths of lap splices. The study concentrated on comparing crack, failure pattern, and bond strength. The ultimate behavior of beams reinforced with galvanized rebar was not significantly different from that of black steel reinforced beams. Therefore, the test results indicated that the use of galvanizing-coated rebar had no adverse effect on behavior in lap splices of rebar compared to the use of black rebar.

• Resources Recycling
• /
• v.16 no.6
• /
• pp.39-45
• /
• 2007

Optimum condition for neutralization has been studied to remove the copper and zinc ions from spent sulfate solutions which resulted from the acid washing of the base of brass bulb. Chemical distribution of copper and zinc species and the variation of solubility of the two ions with solution pH were obtained by considering the complex formation reaction and mass balance. Removal percentage of zinc was more sensitive to solution pH than that of copper. This results from the fact that the solubility of zinc is higher than that of copper. The form of coagulant affected little the removal percentage of zinc, while addition of coagulant as the phase of solution resulted in higher removal percentage of copper than as the phase of solid.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.98-98
• /
• 2011

수직으로 정렬된 1차원 나노구조는 입사되는 빛에 대하여 반사율을 줄일 수 있는 유효 굴절률 profile을 갖고 있어, 태양광소자 및 광전자소자의 성능을 향상시키기 위해 널리 응용되어 왔으며, 이러한 수직으로 정렬된 1차원 나노구조를 제작하는 연구가 매우 활발하게 이루어지고 있다. 그 중 화학적 방법으로 성장시킨 산화아연 나노로드(ZnO nanorod)는 비교적 간단하고 저렴한 제작공정을 통해서 높은 결정성을 갖는 수직형 1차원 나노구조체로 이용 할 수 있다. 한편, 효과적인 무반사(antireflection) 층을 제작하기 위해서는 표면에서 발생되는 Fresnel 반사율을 낮춰야 하는데, 이를 위해서 입사되는 매질에서 기판 사이의 유효 굴절률이 연속적이고, 점진적인 변화가 필요하다. 이에 본 연구에서는 무반사 특성향상을 위해서 실리콘 (Si) 기판위에 tapered 산화아연 나노로드를 화학적으로 성장시켜 반사율 특성을 분석하였다. 실험을 위해, 먼저 Si 기판에 AZO (Al doped ZnO) seed 층을 RF magnetron 스퍼터를 사용해 증착한 후, zinc nitrate $Zn(NO_3)_2{\cdot}6H_2O$과 hexamethylentetramines으로 혼합된 용액에 담가두어 산화아연 나노로드를 성장시켰다. Tapered 산화아연 나노로드를 형성하기 위해 용액의 온도를 서서히 낮춤으로 산화아연나노로드의 끝을 뾰족하게 제작할 수 있었다. 한편, 이론적으로 AZO seed 층의 두께에 대한 반사 스펙트럼을 rigorous coupled wave analysis (RCWA) 계산법을 통해서 시뮬레이션을 수행하였으며, 최적화된 AZO seed 층의 두께를 결정하여, 그 위에 tapered 산화아연 나노로드를 성장시켜 반사율을 측정하여 무반사 특성 향상을 확인 할 수 있었다. 또한, 태양광소자 응용을 위해, 표준 AM1.5G 태양광 스펙트럼을 고려한 solar weighted reflection을 계산하였다.

• Resources Recycling
• /
• v.24 no.3
• /
• pp.27-33
• /
• 2015

EAFD (Electric Arc Furnace Dust) is considered as pernicious pollutant, assigned hazardous waste. Since this dust is a by-product of industry, it contains valuable metals such as Fe, Zn, Ni, Cu which can be turned into resources by recycling process. In this study, hydrometallurgical process was applied to recover Zn from Electric Arc Furnace Dusts. The result showed 95% Zn recovery at 3M $H_2SO_4$, Solids/Liquid ratio 1:2 and aeration of 1.8L/min for 2hr. However there was 80% Zn recovery at lower $H_2SO_4$ concentration apply for pilot scale plant.

• Journal of Wetlands Research
• /
• v.12 no.1
• /
• pp.23-31
• /
• 2010

Chlorinated aliphatic hydrocarbons (CAHs) such as tetrachloroethylene (PCE), 1,1,1-trichloroethane (1,1,1-TCA) are the contaminants most frequently found in soil and groundwater. They have a potential to be toxic to and persistent in environment. This study is focused on selection of zero-valent metal and ores for the removal of high concentration PCE or 1,1,1-TCA and mixture of two compound. For the screening of suitable metals, we measured dechlorination rate, removal capacities and economics by using batch reactor test. This results suggest that removal rate and dechlorination of high quality iron and zinc are higher than slag and nature ores like zinc and manganese. Among nature ores, zinc ores(64% purity) have highest removal capacities. And in economics zinc ores is 10 times better than high quality metal tested. We conclude zinc ore is most suitable metal for the removal of PCE or 1,1,1-TCA.

• Economic and Environmental Geology
• /
• v.44 no.5
• /
• pp.345-357
• /
• 2011

It was carried out to the survey on the lead-zinc and tungsten occurrences in the Kau Loc mineralized belt within northern Vietnam. The lead-zinc occurrence bear the ore body parallel to the bedding of limestone formation. Assuming the surface grade and geological reserve, Pb+Zn deposit is estimated to the small to medium-sized ore deposit. On the other hand, considering the distribution of small-scale stock intruding the Devonian limestone, it is thought that the tungsten occurrence has the proper geological conditions anticipating the presence of skarn mineralization. However, there is no evidence to recognize economic feasibility in the present situation because of the absence of detailed geology and ore deposit survey on the tungsten occurrence.

• Resources Recycling
• /
• v.21 no.1
• /
• pp.3-16
• /
• 2012

In order to review the technological modulus of the recycling of urban mine resources and non-ferrous smelting process in Korea, key point of recycling process, physical separation, non-ferrous smelting process, unit operation for the recycling technology, recycling process of LS-Nikko Copper and Korea Zinc were studied. Finally, metal recycling processes of the typical non-ferrous smelters in Japan such sa DOWA Holdings and JX Holdings were compared with those of LS-Nikko Copper and Korea Zinc.

• Korean Journal of Materials Research
• /
• v.5 no.7
• /
• pp.794-801
• /
• 1995

To connect the driver IC and Al coated glass, a method has been developed to plate electrolessly Ni on Al/PR system. It Is necessary to pretreat Al to remove oxide film before plating. In order to find pretreatment process which does not damage photoresist or glass, alkaline and fluoride zincate process have been investigated. Because photoresist and aluminum thin film can easily dissolve in alkaline solution, it is considered that the fluoride zincate process was a suitable one. After immersion in the zincate solution containing 1.5 g/$\ell$ ammonium bifluoride and 100 g/$\ell$ zinc sulfate, electroless nickel plating could be performed. The additive in the zincate solution and thiourea in the plating solution increased smoothness of the plated surface. Acld dip could improve the uniformit of the surface.