• Polymer Science and Technology
• /
• v.10 no.3
• /
• pp.344-350
• /
• 1999

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.3 no.3
• /
• pp.261-267
• /
• 2015

To develop high-strength high-volume ground granulated blast-furnace slag (GGBFS) concrete, this study investigated the characteristics of strength development and durability of concrete with the water-to-binder ratio of 23% and the GGBFS replacement ratio of up to 65%. The results show that the compressive strength of GGBFS blended concrete is lower than that of ordinary Portland cement (OPC) concrete up to 3-day age, but the becomes higher after 7-day age. Together with strength increase, the pore structure becomes tighter, and thus the resistance to chloride ion penetration increases. Therefore, the GGBFS blended concrete has high resistance to freezing and thawing without additional air-entraining, and high resistance to carbonation despite low amount of calcium hydroxide ($Ca(OH)_2$). On the other hand, if silica fume (SF) is blended with GGBFS, the strength becomes lower than that of the concrete blended with GGBFS only, and the resistance to chloride ion penetration deceases. Therefore, it needs further studies on the reaction of SF in high-strength high-volume GGBFS concrete.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.425-428
• /
• 2008

To use lightweight aggregate concrete with the structural material, it was need to evaluate property of mechanic and drying shrinkage and creep of the lightweight aggregate concrete, but these weren't. So the purpose of this study which it sees follows the mechanical property of the eco lightweight aggregate concrete according to the water binder ration in the high strength concrete. Eco lightweight aggregate was made with clay and crushed rock in this study. To make experiment, water binder ratio was divided 35% and 39%. And the fresh concrete properties were that slump flow was 500${\pm}$50mm, air contents was 2.0${\pm}$1.0%. It evaluated the hold a drying shrinkage and the creep the effect, it analyzed quality and reliability of the eco lightweight aggregate concrete.

• Journal of the Korea Concrete Institute
• /
• v.27 no.6
• /
• pp.641-649
• /
• 2015

The purpose of this study was to assess the durability of high-strength concrete with high volume mineral admixture (HVMAC) derived from previous studies within ternary blended concrete (TBC) and normal concrete (NC). Four durability evaluation types such as chloride penetration resistance, freezing and thawing resistance, carbonation resistance in two pre-treatment conditions, and sulfuric acid and sulfate resistance using 5% sulfuric acid ($H_2SO_4$), 10% sodium sulfate ($Na_2SO_4$), and 10% magnesium sulfate ($MgSO_4$) solution were selected and performed in this study. HVMAC showed the excellent chloride penetration resistance in any age and the freezing and thawing durability close to 100%. In addition, HVMAC affected more reduction in carbonation resistance than TBC. When the curing time was increased, to create a concrete internal organization densely improved resistance to carbonation. HVMAC also showed the most superior in sulfuric acid and sulfate resistance. As the reduction of calcium hydroxide and $C_3A$ to apply a large amount of admixture reduced the swelling and cracking of concrete, the strength reduction and mass change of concrete was found to be small indicated.

• Journal of the korean Society of Automotive Engineers
• /
• v.15 no.4
• /
• pp.34-43
• /
• 1993

본 고에서는 피로해석을 통한 승용차 강도/내구기법에 대하여 개략적으로 언급하였다. 피로해석에 어려운 점은 수명예측방법이 이론적으로 완전히 정립된 것도 아니며 하중 및 재료특성 그리고 주변 사용환경등에 대한 불확실성으로 정량적인 평가가 힘들다는 것이다. 하지만 설계시간의 단축 및 효과적인 경량화 달성을 위해서는 보다 효율적이며 범용화된 피로해석 기법의 개발이 필요하며 해석과정의 자동화도 반드시 이루어져야 할 과제이다.

• 전기의세계
• /
• v.46 no.3
• /
• pp.3-6
• /
• 1997

최근 노트북PC, 전동공구, 전기면도기등 휴대용 전자기기를 비롯한 전기자동차등에는 NiCd 전지등 충전형 2차전지가 폭넓게 사용되고 있다. 종래 이러한 전지의 충전에는 접점을 이용하여 전력을 공급하는 방법이 이용되어 왔으나 안정성, 내구성, 신뢰성, 간편함등의 면에서 볼 때 비접촉 충전이 바람직한 방법으로 대두되고 있다. 그러나 비접촉 충전에는 고주파 인버터와 탈착 트랜스포머가 핵심적인 요소로 나타난다. 따라서 스위칭 노이즈 및 스위칭 손실이 저감될 수 있는 소프트 스위칭 고주파 인버터 및 대전력을 전달할 수 있는 탈착 트랜스포머가 필요하게 된다. 본 고에서는 다년간 이 분야의 연구에 종사하고 있는 쿠마모토 공업대학 응용에너지 일렉트로닉스 연구소 K. Harada 교수 및 H. Sakamoto 교수 연구팀의 연구 성과를 중심으로 하여 소프트 스위칭 고주파 인버터에 의한 비접촉 충전에 관하여 소개하고자 한다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.304-304
• /
• 2011

최근 도시화에 따른 인구증가와 더불어 도로포장 등 불투수면적의 증가로 인하여 우기시 빗물 침투가 차단되어 도심의 지하수위가 저하되며 토양의 건토화, 열섬현상 등의 문제가 발생하게 되었다. 이러한 문제점에 착안하여 본 연구에서는 투수효과를 최대한 고려할 수 있는 고강도의 친환경 콘크리트 블록(에크스톤 바이오 블록; ECOSTONE-BIO BLOCK)을 개발하였으며 기존 콘크리트 블록의 자연적 빗물침투 억제의 문제점을 일부 개선하였다. 본 블록은 캡슐공법을 사용하여, 공극률은 높이면서(투수성 향상), 강도와 내구성이 유지됨은 물론 캡슐안에 황토성분을 첨가하여, 바이오적인 기능 및 재생골재를 이용한 친환경적 제품으로 투수성, 내구성, 기능성을 극대화 시켰다. 또한 제품표면은 천연 백색돌맹이, 흑색돌맹이의 배합으로 자연석재 느낌을 구현하였으며, 쇼트블라스트 및 커링 표면공정으로 미끄럼저항지수를 조절할 수 있어, 기존 콘크리트 보도블록에 비해 투수율, 내구성, 기능성, 안전성이 우수하여, 안전한 보행환경이 가능한 것으로 분석되었다. 마지막으로, 주변 환경과 잘 어울리도록 디자인된 바이오기능성 친환경 블록으로 도심지역 시공시 투수효과에 따른 지하수고갈방지 및 침수피해에 도움을 주리라 사료된다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.18 no.4 s.70
• /
• pp.427-434
• /
• 2005

In this study, to develop composite bridge deck of many advantages such as light weight, high strength, corrosion resistance and high durability, profile design, laminate design and finite element analysis were carried out. In the analysis, 5-girder single span bridge with composite deck was considered. Deflection serviceability, failure criteria and web buckling were evaluated. Composite deck of designed profile was fabricated with pultrusion process. The coupon tests were conducted for the fabricated deck and the results were described.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.2
• /
• pp.159-170
• /
• 2003

In this study, the mixed design of grout with hish strength.high permeation.high durability and environmental stability as the state of the art in material field was performed. Also, the subjects of grouting, grouting effects for ground conditions, and environmental effects were analyzed. According to these results, the fundamental data will be suggested as a design of grouting in the field application. The physical, mechanical and chemical characteristics with particle shape of the grouts were analyzed. Then, the gel-time of grouts, which is essential for workability and permeation range, were controlled. Also, the laboratory model grouting tests were performed to find the characteristics of solidification, permeation and durability with grouts. The ordinary portland, slag and microcement which have been used in the construction field were evaluated fur the environmental effects. To find the leaching of $Cr^{6+}$characteristics in cement grouts, $Cr^{6+}$ leaching tests were performed for the raw materials. Also, the results of leaching test were shorn by surrounding environment. Then, the unconfined compression strength tests were performed with the homo-gel samples, and the amount of changed $Cr^{6+}$ was measured by curing solution.

• Journal of the KSME
• /
• v.32 no.7
• /
• pp.604-612
• /
• 1992

D-Gun과 plasma 코팅이라고 하는 코팅(도금) 기술은 1950년대 미국 유니온 카바이드사에 의해 세계 최초로 개발되어 실용화된 이래 전세계의 산업전반에 걸쳐 꾸준히 그 응용분야가 확대되어 왔으며, 오늘날에는 점보 제트 여객기의 엔진으로부터 석유화학설비, 제철제강설비, 섬유기계, 인쇄기계, 제지기계, 식품기계, 발전설비, 자동화부품, 전자제품 등에 이르기까지 각종 산업기계 및 제품 생산에 응용되고 있다. 특히 최근에는 이들 산업기계가 고속화, 고성능화, 고품질화됨에 따라 그 구성부품도 필연적으로 고성능의 내구성 등이 요구되어 세라믹 등 특수 코팅의 필요성이 절실히 요구되고 있다.