• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.11
• /
• pp.376-385
• /
• 2019

This study was undertaken is to isolate brewing yeast suitable for rice beer fermentation from the traditional Nuruk, and to identify the brewing ability of the isolated yeast. After 6 months of research, four brewing yeast isolated from traditional Nuruk showed a normal fermentation pattern in terms of physicochemical data (pH, brix, alcohol content) and higher vitality, as compared to commercial brewing yeast. The concentrations of higher alcohol and ester, that impart the aroma to beer, were 78.4 to 106.5 ppm and 15.1 to 29.3 ppm, respectively. In particular, S. cerevisiae (KCCM 90313) bestowed significantly higher contents of higher alcohol and ester concentrations than rice beer prepared from commercial yeast. We conclude that the four variants of yeast isolated from traditional Nuruk are potentially suitable for manufacturing rice beer. Especially, the S. cevisiae (KCCM 90313) yeast shows excellent yeast activity and aroma production, thereby displaying potential application for manufacturing rice beer in the future.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.36 no.2
• /
• pp.33-38
• /
• 2004

Toner particles used in laser and xerographic printing process is fused on paper surface so strongly that they tend not to detach easily from the recylced paper surface during pulping. Furthermore, the removal efficiency of detached toner particles by conventional screening and flotation process has limitation due to the platy shape and large size of detached toner particles. It has been shown that the removal efficiency of toners in the screening process can be increased by agglomerating the toner particles with fatty alcohol. It is not possible, however, to remove small and platy toner particles by screening process. These small and platy toner particles should be removed by flotation process. In this study the effect of fatty alcohol that used for toner agglomeration on flotation efficiency has been examined. It was shown that flotation efficiency decreased when fatty alcohol was used most probably due to its effect of reducing hydrophobicity of toner particles.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.36 no.2
• /
• pp.24-32
• /
• 2004

Toner used in xerographic printing process is hydrophobic powder with low surface energy. The toner ink film fused on paper surface can be efficiently detached from a fiber surface during pulping, but it does not fragment again into fine toner particles. Ink agglomerates that result have too large particle size to be deinked by flotation. The purpose of this study is to enhance toner agglomeration using 1-octadecanol for improving the toner removal by screening. The effect of pH, pulping temperature, and 1-octadecanol on toner agglomeration and removal by screening was investigated using image analysis methods. Results showed that the size of toner agglomerates increased substantially when pulping was carried out at high temperature under acidic condition. When toner agglomerates showed spherical shape, the particle removal efficiency of screening was improved.

• Food Science and Preservation
• /
• v.21 no.6
• /
• pp.851-858
• /
• 2014

Muscat Bailey A (MBA) wine was fermented using the indigenous Korean Saccahromyces cerevisiae strains S13 and D8, and the fermentation characteristics were compared with those of S. cerevisiae W-3, an industrial wine yeast. The strains S13 and D8 showed delayed alcohol fermentation compared with the W-3 strain, but the final alcohol contents of the S13 and D8 wines after fermentation were similar to those of the W-3 wine. The S13 wine showed significantly lower malic-acid content than the W-3 wine, but the D8 wine showed a similar level. Both the wines fermented using the S13 and D8 strains showed significantly lower acetaldehyde, methanol, and fusel oil contents, including n-propanol, iso-butyl alcohol, and iso-amyl alcohol, compared to the W-3 wine. Especially, the methanol content was 98.6 mg/L in the S13 wine and 112.0 mg/L in the D8 wine, which were much lower than 192.8 mg/L in the W-3 wine. The S13 wine obtained the highest score in terms of color among the three wines in the sensory evaluation, with lower Hunter's L, a, and b values compared to the W-3 wine.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.6
• /
• pp.800-806
• /
• 2007

This study investigated the quality characteristics of kiwi wine during low temperature aging on several alcohol fermentation strains. Alcohol content increased sharply from 2 days of fermentation, and then maintained steadily after 8 days of fermentation. In the alcohol content of kiwi wine on several alcohol fermentation strains such as Sacch. cerevisiae GRJ, Sacch. kluyveri DJ97 and Sacch. cerevisiae Wine 3 showed a high value of more than 13%, 12.7% for Zigosacch. cerevisiae JK99 and 12.3% for Sacch. cerevisiae OMK, respectively. Sugar content decreased steadily during fermentation and then showed approximately $10^{\circ}$Brix on 8 days of fermentation. Total acidity ranged $1.03{\sim}1.04%$ in total samples, increased slowly during fermentation and then maintained steadily during aging. During the fermentation, L value in Hunter's color value continued to increase, a value decreased steadily and b value showed high yellow to approximately 20.0. For aging duration, L and b values decreased while a value increased. Glucose and maltose were detected as free sugars of kiwi wine. In volatile flavor compounds, alcohols were identified differently on alcohol fermentation strains, but the others showed similar tendency. In conclusion, quality characteristics of kiwi wine on several alcohol fermentation strains showed similarly; however, Sacch. cerevisiae Wine 3 was overall the most suitable.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.3
• /
• pp.579-586
• /
• 2018

In this study, surfactants were synthesized using fatty alcohols of 8, 10, 12 and 14 carbon chains length. The structures of the synthesized surfactants was confirmed by FT-IR and $^1H$-NMR analysis. The surface tension of the diluted surfactant was measured as 26~32 mN/m depending on the carbon length and the critical micelle concentration was measured as $10^{-3}{\sim}10^{-5}mol/L$.The minimum value per molecule of the synthesized sulfonic acid surfactant is 1.68 to $1.30nm^2$. The physical properties of the synthesized surfactants were determined by measuring the critical micelle concentration, foaming power, emulsifying stability, and contact angle.

• Food Science and Preservation
• /
• v.21 no.6
• /
• pp.917-924
• /
• 2014

Normal- and late-harvested Fuji apples were fermented using the rapid-fermenting yeast strain Saccharomyces cerevisiae SS89. The late-harvest apples showed a slightly higher soluble-solid content with a lower level of total-acid and moisture (p<0.05) contents as well as hardness (p<0.05) than the normal-harvest apples. During the fermentation, the apples had similar changes in the pH and total-acid content regardless of the harvest time, but the increases in the alcohol content and yeast viable count with the decrease of the soluble-solid content were more rapid in the late-harvest apples than in the normal-harvest apples. After the completion of the fermentation, the soluble-solid and alcohol contents became very similar. The late-harvest cider showed a high total phenolic-compound content and a high DPPH radical scavenging effect, although these were slightly lower than those of the normal-harvest cider. It also showed a higher malic-acid content and higher hue color (p<0.05), Hunter's L, and b (p<0.05) values than the normal-harvest cider. In the sensory evaluation, the late-harvest cider obtained a higher score in taste and a lower score in color compared to the normal-harvest cider.

• The Korean Journal of Food And Nutrition
• /
• v.27 no.1
• /
• pp.50-58
• /
• 2014

Makgeolli, known as takju, is a traditional alcoholic beverage which is native in Korea. It is made from various rice and other cereals. This study is carried out to compare the physicochemical characteristics and functional quality of makgeolli from various rice cultivars according to different amylose contents and amylopectin compositions. The 'Goami2', 'Goami3', and 'Goami4' have high amylose contents and lower proportional degrees of polymerization (DP) 6~12 and higher proportions of DP 13~24 in amylopectin of milled rice. Various variations are shown in pasting properties (viscosities) and gelatinization characteristics, and it is supposed to be related to both the amylose contents and the amylopectin compositions of raw rice. The makgeolli is being manufactured by using the 2-step-brewing method. The makgeolli is analyzed for alcohol contents, pH levels, total acids, Hunter color values and organic acid compositions. The makgeolli of 'Goami2', 'Goami3', and 'Goami4' have showed higher makgeolli yields, lower ethanol contents and less sweetness than other cultivars, and they also have high non-digestible carbohydrates contents which are derived from their high non-digestible carbohydrates contents in milled rice. Therefore, we are able to suggest that it is necessary to improve the makgeolli fermentation processes of 'Goami2', 'Goami3', and 'Goami4'.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.33 no.4
• /
• pp.227-230
• /
• 2007

The multi-lamellar and liquid crystal structures have drawn great public attention in the functional cosmetic and skin-related medicinal areas recently. The structure of an emulsion containing aqueous phase as a binding water and fixed oil phase components forming an association compound of the multi-lamellar structure can reconstruct the intercellular lipid lamellar structure in the stratum corneum and restore barrier function of the skin. In this study, we investigated the beneficial effect of bio-mimic liquid crystal emulsions (BLCE) containing higher fatty alcohol, lecithin, and cholesterol on the skin barrier function, and evaluated its cytotoxicity.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.6
• /
• pp.904-911
• /
• 2015

The objective of this study was to investigate the quality characteristics of traditional wine using an radio-frequency identification (RFID) system annexed to a fermenter. In this study, we proposed an RFID-based data transmission scheme for monitoring fermentation of traditional alcoholic beverages. The pH, total acidity, total sugar, soluble sugar, free sugar, alcohol content, and organic acids of were investigated and subjected to fermentation of traditional alcoholic beverages three times. The pH ranged from 7.98, 7.95, and 7.68 at day 0, decreased drastically to 3.31~2.96 at day 2, and then slowly increased to the end point, finally reaching 3.34 at day 20. Acidity tended to increase quickly with time, especially for all samples after day 2. The fermentation environment induced a sudden increase acidity in reactants and indicated a low pH. The total sugars during fermentation quickly decreased to the range of 20.3, 22.43, and 19.2% at day 2, and the slope of reduction steadily decreased to 5.1, 6.1, and 4.8% at day 10. On the other hand, the alcohol content showed the reverse trend as total sugars. The alcohol content also showed the same pattern as total acids, showing the highest alcohol content of 17.3% (v/v) on day 20. In this study on traditional wine fermentation using an RFID system, we showed that pH, soluble sugar, and alcohol content can be adopted as key indicators for quality control and standardization of traditional wine manufacturing.