• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.13 no.2
• /
• pp.285-289
• /
• 1995

This paper describes the determination of geoid using height data measured by GPS and Spirit Levelling. The GPS data of the 88 stations were used to determine the geoid undulation (N) which can be easily obtained by subtracting the orthometric height(H) from the ellipsoidal height(h). From the geoid undulation (N) calculated at each station mentioned above, geoid plots with a contour interval of 0.25 m were drawn using two interpolation methods. The following interpolation methods were applied and compared with each other: Minimum Curvature Method and Least Squares Fitted Plane. Comparison between geometric geoid and gravimetric geoid undulation by FFT technique was carried out.

• KSBB Journal
• /
• v.9 no.5
• /
• pp.512-517
• /
• 1994

The morphology of fungal growth, which is an important variable for separability and rheological property of fermented medium, was quantified with fractal geometry. Fractal dimensions were determined for submerged growth of two industrially important fungi, Aspergillus niger and Aspergillus oryzae. The tendency of pellet formation was related to the fractal dimension of fungi.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2528-2530
• /
• 2002

본 연구에서는 캘리브레이션 박스와 같은 사전에 약속된 물체를 사용하지 않고 일반적인 환경(unstructured environment)의 컬러 스테레오 영상으로부터 특징점을 찾고, 특징점 사이의 대응관계를 사용자 개입 없이 파악하는 방법에 대해 소개한다. 또한 찾은 대응관계를 이용해 스테레오 카메라 사이의 에피폴라 기하학(epipolar geometry) 관계를 계산하여 셀프 캘리브레이션에 이용한다. 이와 유사한 연구는 많이 진행되어 왔으나 대부분의 연구가 흑백 영상에서 진행되어 왔다. 본 연구에서는 컬러 이미지의 속성을 이용해 흑백 영상을 이용할 때보다 외부 환경의 변화에 강인하며, 정밀한 대응 관계를 찾을 수 있음을 실험을 통해 보인다.

• The Journal of the Korea Contents Association
• /
• v.11 no.12
• /
• pp.522-532
• /
• 2011

In Oriental medicine, the status of a tongue is the important indicator to diagnose the condition of internal organs in a body. A tongue diagnosis is not only convenient but also non-invasive, and therefore widely used in Oriental medicine. But tongue diagnosis has some problems that should be objective and standardized, it also exhaust the diagnosis tool that can help for oriental medicine doctor's decision-making. In this paper, to solve the this problem we propose a method that calculates the tongue geometry information for effective tongue diagnosis analysis. Our method is to extract the tongue region for using improved snake algorithm, and calculates the geometry information by using convex hull and In-painting. In experiment, our method has stable performance as 7.2% by tooth plate and 8.5% by crack in region difference ratio.

• Journal of the Korea Society of Computer and Information
• /
• v.29 no.3
• /
• pp.91-98
• /
• 2024

In this paper, we present a particle-grid blending framework based on a geometric approach to efficiently represent opaque ice spheres with air bubbles. The water temperature is diffused through the grid and the air bubbles represented inside the ice through the particles. To solve the problem of previous methods that generate noisy dissolved air fields, we use levelsets to lighten the algorithm, i.e., the number of active particles and the initial amount of dissolved oxygen can be used to efficiently control the termination conditions of heat diffusion. We also extend the previous dissolved air field method, which only computes near air bubbles, to transparent regions to represent realistic ice spheres, and introduce a levelset-based approach to accurately compute the orientation of particles. As a result, the method presented in this paper is about three times faster than the existing methods and shows visually improved visualization of opaque ice spheres, which can be used in the field of representing physical virtual ice forms.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.8
• /
• pp.99-106
• /
• 2003

Geometrical design variables are numerically investigated to improve aerodynamic performance of the supersonic impulse turbine of a turbopump in a liquid rocket engine. Aerodynamic redesign was performed for maximization of the blade power. Four design variables considered are blade angle, blade thickness and radii of upper and lower arc blade with appropriate constraints. A fast Navier-Stokes solver was developed and Chien's k-$\varepsilon$ turbulence modelling was used for turbulence closure. In initial shape, a flow separation was found in the middle of blade chord. However, it disappeared in final shape via its geometrical design variable change. About 3.2 percent of blade power was increased from this research.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.17 no.1
• /
• pp.19-25
• /
• 2007

Among the precision reduction gent drivers lot robot system, the cycloid reducer is well known for it's high performances. Designing this reducer, there are many factors which must be considered. First, a geometrical analysis of tooth shape must be drawn from the basic concept. Second, loads, stresses and modification factors on tooth should be calculated exactly. Finally, a computer software to optimize the design of cycloid tooth needs developing on the basis of the geometric and force equations. In this research, the expert system to design the cycloid reducer was developed using Visual C++ so, the most important factors can be obtained automatically as the user put the simple input data.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.3
• /
• pp.91-97
• /
• 2001

Since the new field information of target signal is important in the development and verification of active sonar system, experimental method and simulation technique are widely used in order to analyze the detail characteristics of target scattered echoes. Therefore, in this paper, the scale target experiment is performed to develope and Improve the target signal simulation model. Since the experimental results show that the specular reflection is the major component among scattering mechanisms, the target signal simulation model based on the Geometric Optics Theory (GOT) is developed. Complex target is separated into simple shapes, known as canonical shape. The contribution from individual canonical shapes are summed with proper phase and amplitude to produce the target strength of the whole complex body. Simulated target signal is compared with the experimental results and discussed.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.8
• /
• pp.27-35
• /
• 2003

Geometric modeling tool and analysis tool of shell surface have been developed in the different environments and purposes. Thus they cannot be naturally fitted to each other for the integrated design and analysis. In the present study, an integrated framework of geometric modeling, analysis， and design optimization is proposed. It is based on the common representation of B-spline surface patch. In the analysis module, a geometrically-exact shell finite element is implemented. In shape optimization module, control points of the surface are selected as design variables. For the computation of shape sensitivities, semi-analytical method is used. Sequential linear programming(SLP) is adopted for the shape optimization of surfaces. The developed integrated framework should serve as a powerful tool for the geometric modeling, analysis, and shape design of surfaces.

• Korean Journal of Crystallography
• /
• v.7 no.2
• /
• pp.191-195
• /
• 1996

Geometrical calculations are often more easily made in an orthonormal than in a crystallographic frame. In this paper a rational for the transformation from a triclinic cell data and atomic coordinates to orthonormal ones has been shown and a computer program has been made for the transformation.