• Polymer(Korea)
• /
• v.36 no.3
• /
• pp.338-343
• /
• 2012

Interfacial properties of commercially available soft contact lens hydrogels were studied to understand thermodynamic phenomena of protein adsorption. Hydrogel particles ($1{\times}1mm^2$) with varying water wettability were exposed to bovine serum albumin solutions for an hour. The remained albumin solutions were analyzed with Bradford assay method. The amount of protein adsorbed to hydrogels increased with protein solution concentrations following Langmuir isotherm. The partition coefficient ($P$) and Gibbs free energy cost of dehydrating the surface region by protein displacement upon adsorption increased with increasing hydrophilicity of contact lens. Understanding of physical chemistry in protein adsorption to contact lens materials enabled elucidating relationships between surface energy and albumin adsorption capacity.

• Polymer(Korea)
• /
• v.38 no.2
• /
• pp.220-224
• /
• 2014

Protein adsorption kinetics was studied with the amount of proteins adsorbed to contact lens hydrogels over time scales. Hydroxyethylmethacrylate (HEMA) and silicone hydrogels were dipped in protein solutions (albumin or IgG) and adsorption amounts were measured over time scales. The amount of protein adsorbed to both hydrogel types increased rapidly in 10 min, and remained consistently in 90 min. Decreasing interfacial energetics was taken slowly up to an hour in spite of rapid diffusion of protein molecules. This is due to the fact that water deprivation from three dimensional interphase initially formed by protein diffusion took over an hour. Interpretation of adsorption kinetics on contact lens hydrogels was discussed with understanding of relationship between surface energy and protein adsorption capacity.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1995.10a
• /
• pp.29-30
• /
• 1995

산업폐수는 종종 희석용액 내에 많은 유독성 물질을 함유하고 있다. 산업폐수를 처리하는 분리공정으로 역삼투막과 한외여과와 같은 막분리 기술은 분리 공정이 간단하고 상변화없이 폐수용량을 크게 감소시킬 수 있고 에너지 소모가 작은 장점을 가지고 있어 그 적용이 확산되고 있다. 계면활성제의 흡착성을 이용한 한외여과 막분리는 높은 막투과속도와 계면활성제의 높은 선택성이 결합된 것인데, Sodium Dodecyl Sulfate(SDS)와 같은 계면활성제를 이용하여 폐수로부터 불용성 중금속 이온과 독성의 유기물질을 분리하는 데에 적용할 수 있다. 임계미셀농도(CMC) 이상에서의 농도에서, 60~200 계면활성제 분자들이 거대분자나 미셀을 형성하면서 서로 응집된다. 그러므로 음으로 하전된 미셀과 결합된 금속 음이온은 2,000에서 10,000 범위의 분자량을 가지는데 역삼투막(RO)보다 작은 압력에서 상당히 큰 막투과속도를 가진 한외여과막에 의해 선택적으로 제거될 수 있다 본 연구의 목적은 중공사 한외여과막의 막투과속도에 미치는 인자들의 영향과, 계면활성제의 흡착성을 이용한 중공사 한외여과 막분리계 성능에 미치는 금속의 형태, S/M 몰비등의 효과를 결정하는데 있다.

• Korean Chemical Engineering Research
• /
• v.51 no.4
• /
• pp.527-530
• /
• 2013

I present the behavior of colloidal adsorption to an oil-water interface in the presence of electrolyte in an aqueous subphase. The optical laser tweezers and the piezo controller are used to trap an individual polystyrene microsphere in water and forcibly transfer it to the interface in the vertical direction. Addition of an electrolyte (i.e., NaCl) in the aqueous subphase enables the particle to attach to the interface, whereas the particle escapes from the trap without the adsorption in the absence of the electrolyte. Based on the analytical calculations of the optical trapping force and the electrostatic disjoining pressure between the particle and the oil-water interface, it is found that a critical energy barrier between them should exist. This study will provide a fundamental understanding for applications of colloidal particles as solid surfactants that can stabilize the immiscible fluid-fluid interfaces, such as emulsions (i.e., Pickering emulsions) and foams.

• Journal of the Korean Vacuum Society
• /
• v.7 no.2
• /
• pp.77-81
• /
• 1998

The eptiaxial growth of Ge on the clean and surfactant (Sn) adsorbed surface of Ge(111) was studied by the intensity oscillation of a RHEED specular spot. In the case of epitaxial growth without the adsorbed surfactant, the RHEED intensity oscillation was stable and periodic up to 24 ML at the substrate temperature of $200^{\circ}C$. Therefore the optimum temperature for the epitaxial growth of Ge on clean Ge(111) seems to be $200^{\circ}C$. However, in the case of epitaxial growth with the adsorbed surfactant, the irregular oscillations are observed in the early stage of the growth. The RHEED intensity osicillation was very stable and periodic up to 38 ML, and the d2$\times$2 structure was not charged with continued adsorption of Ge at the substrate temperature of 2002$\times$2. These results may be explained by the fact that the diffusion length of Ge atoms is increased by decreasing the activation energy of the Ge surface diffusion, resulted by segregation of Sn toward the growing surface.

• Journal of the Korean Vacuum Society
• /
• v.20 no.1
• /
• pp.35-41
• /
• 2011

In this study, the interface soaking effect in InAs/GaAs strained-layer superlattice (SLS) on crystalline phase modulation has been analyzed by the x-ray diffraction (XRD) curve. The strain variation induced by As and/or Sb soaking was determined by the separation angle between the substrate peak and the 0th-order superlattice satellite peak in the XRD spectra. Contrated that the As/InAs soaking arises minor GaAs-like interfacial layer, the Sb/GaSb soaking induces InSb-like one. The Fourier-transformed curves of the Pendellosung interference oscillation shows that the optimum soaking times of As/InAs and Sb/GaSb are 2 sec and 12 sec, at which the highest crystallineity has, respectively. An anomalous twin-peak phenomenon that a satellite peak splits into two peaks was observed in the SLS structure co-soaked by As and Sb at InAs${\rightarrow}$GaSb interfaces. We suggest that it may be resulted from coexistence of two kinds crystalline phases of InAsSb and GaAsSb due to intermixing of In${\leftrightarrow}$Ga and Sb${\leftrightarrow}$As.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.6
• /
• pp.583-587
• /
• 2006

In this study, the phosphate adsorption characteristics of zirconium mesostructures synthesized under different conditions were estimated. X-ray diffraction analysis, phosphate adsorption isotherm test and kinetic test was performed for the zirconium mesostructures synthesized at different inorganic/surfactant molar ratio and with different surfactant templates. The test results were analyzed with adsorption models. From this work, it was found that at the inorganic/surfactant molar ratio of 1/0.50($0.013{\cdot}Zr(SO_4){_2}:0.068{\cdot}surfactant:5.55{\cdot}H_2O$), the meso-pores in the material could be most uniformly and clearly formed and thus the adsorption capacity and reaction rate of material could be maximized. And the pore size in the mesostructure increased with the chain length of surfactant template used, and maximum phosphate adsorption amount and reaction rate could be achieved with the zirconium mesostructure synthesized with the surfactant template of dodecyltrimethylammonium bromide.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.3
• /
• pp.231-239
• /
• 2005

This study was performed to investigate adsorption characteristics of MTBE and Cd depending upon types of clay minerals md their physicochemical properties. The adsorption characteristics were examined by batch adsorption test on various experimental parameters such as adsorption time, ratio of solution to soil, concentration of contaminants, content of organic matter, pH, and zeta potential. The adsorption efficiency of MTBE or Cd for three types of clays decreased in response to the increase of the ratio of solution to soil whereas their adsorbed amounts increased. MTBE was greatly adsorbed in the decreasing order of vermiculite, bentonite, and CTAB-bentonite while Cd was adsorbed in the decreasing order of bentonite, vermiculite, and CTA-bentonite. An equilibrium isotherm for MTBE was well fitted to Freundlich plotting whereas that for Cd was closely corresponded to Langmuir isotherm. The adsorbed amount of MTBE on bentonite and vermiculite showed the maximum at 1% and 5% of humic acid, thereafter diminished while the adsorbed amount of MTBE on CTAB-bentonite increased in proportion to humic acid. Conversely, the adsorbed amount of Cd on the addition of humic acid continued to increase regardless of types of adsorbents. For all types of adsorbents, adsorbed quantity and adsorption efficiency of Cd have been coincidently increased at pH 8 and they were further enhanced at pH 10 showing 90% adsorption efficiency. Upon pH rose, the zeta potential on each adsorbent began to decrease, while increasing Cd concentration led to decline of zeta potential, which in turn ascribed to lowering dispersion stability that could consequently enhance adsorption capability.

• Applied Chemistry for Engineering
• /
• v.7 no.5
• /
• pp.849-860
• /
• 1996

Natural zeolites which were known to occur in sedimentary clinoptilolite, were treated by thermal and chemical methods, and their adsorption characteristics of Cu(II) were studied. Analyses by FT-IR, S. E. M, TGA/DSC, and XRD showed that the adsorption capacity of Cu(II) on the zeolite decreased gradually at the temperatures of above $400^{\circ}C$. The zeolites, which treated with NaOH and NaCl, show higher absorbility in acid solution. The adsorption rate of Cu(II) in the presence of surfactants(LAS, POE AE) on the thermally or chemically treated zeolites varied depending on pH, anion or nonion surfactants.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6B
• /
• pp.677-682
• /
• 2006

Dodecyldimethylethylammonium (DDDEA), a cationic surfactant, and aluminum metal ions were used with bentonite to synthesize to synthesize an improved organo bentonite. Among three different synthesis procedure for organo bentonites, aluminium-pillared bentonite showed the highest DDDEA sorption, which indicated that aluminium-pillared organo bentonite would exhibit the highest sorption capacity for organic contaminants. Aluminium pillared organo bentonite also showed a high sorption capability for phosphorus, while it did not exhibit strong sorption for nitrate. In the meantime, more desorption was observed with aluminium-pillared organo bentonite than ordinary organo bentonites.