• Journal of the Korean Electrochemical Society
• /
• v.2 no.2
• /
• pp.70-74
• /
• 1999

The electrode kinetic parameters at the Pd/0.5 M LiOH electrolyte interface have been qualitatively studied using the phase-shift method. The phase shift $(\phi)$ depends on both the cathode potential (E>0) and frequency (f), and $\theta$ is inversely proportional to the fractional surface coverage $\theta$. At an intermediate frequency (10 Hz), the phase-shift profile $(\phi\;vs.\;E)$ can be related to the fractional surface coverage $(\theta\;vs.\;E)$. The phase-shift method can be used to estimate or plot the Frumkin adsorption isotherm. The rate (r) of change of the free energy of adsorption with $({\theta})$ is 22.3 kJ/mol. The equilibrium constant (K) for adsorption and the standard free energy $({\Delta}G_{\theta})$ of the adsorbed hydrogen atom $(H_{ads})$ are $3.7\times10^{-3}{\Delta}G_{\theta}>-8.4kJ/mol$, respectively. For 1$0.38>\theta>0$, the energy liberation or the exothermic reaction for hydrogen adsorption at the Pd cathode can be occurred. The electrode kinetic parameters $(r,\;K,\;{\Delta}G_{\theta}$ depend on the fractional surface coverage $({\theta})$ or the phase shift $(\phi)$.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 1999.10a
• /
• pp.105-105
• /
• 1999

핵연료 피복관은 핵연료에서 방사성 핵분열생성물의 방출을 저지하는 가장 뚱요한 방어막인데, 현재 지르칼로이 4가 피복관의 재료로 사용되고 있다. 사용후 핵연료는 원자력발전소내 습식 저장조에 저장되고 있으나, 지속적인 관리와 장소확보의 용이 성으로 인해 건식 저장조를 사용하는 추세에 있다. 본 연구에선 건식 저장조에 장 기간 저장되는 핵연료 피복관에 주변 환경으로부터 오염될 수 있는 소금기나 기름 등이 지르칼로이의 공기중 산화에 미치는 영향의 존재를 밝히려 한다. 현재 고리 원자력발전소에서 사용중인 핵연료 피복관을 1cm정도 높이로 자르고, 피복관 표면 을 ASTM -G2-88 방법으로 처리한 후 산화실험을 수행하였다. 산화정도는 간헐적 (intermittent) 방법을 사용하여 시편의 무게를 측정하여 구하였으며, 산화온도는 $400-500^{\circ}C$로 하였다. 소금이 흡착이 된 경우, 산화 속도는 흡착이 안된 시편보다 가속되었으며, 거의 이차법칙을 따르고 있다. 산화막 위의 흡착물의 영향을 알아보기 위해, 지르칼로이를 $500^{\circ}C$ 수증기에 $5g/m^2$ 두께로 산화시킨 후, 다시 산화실험을 수행하였다. 사용한 흡착물은 LiF, NaF, KF, NaCI 이다. 흡착물들은 산화를 대체로 가속시켰으며, NaF, KF, NaCI 순으로 그 영향력이 컸다. 그러나, LiF는 산화에 전혀 영향을 미치지 않았다. SIMS를 사용하여 각 시편의 두께에 따른 흡착물의 분포 를 알아보았다. 음이온(CI, F)과 양이온(Na, Li, K)이 산화막과 금속 경계면까지 관 찰되었으며, 음이온과 양이온의 분포는 대게 동일하였다. LiF의 경우 산화막에서 이들의 농도가 급격히 떨어지고 있음을 알 수 있었다. 산화막 내에서 이들 흡착물의 확산이 산화속도 가속의 원인이며 이들 흡착물중 CI과 F는 산화막과 금속 겸계면 에서 새로 생성되는 산화막의 강도에 영향을 미쳐, 일찍 미세균열을 만들기 시작하여 산화를 가속시키는 것으로 판단된다.

• KSBB Journal
• /
• v.17 no.1
• /
• pp.38-43
• /
• 2002

Characteristics of cell growth and heavymetal adsorption by recombinant Saccharomyus cerevisiae strains harboring multiple copies of the CUP1 gene encoding metallothione (MT) protein were studied in batch cultures. Recombinant S. cerevisiae strains harboring multiple copies of the CUP1 gene were superior to the host and wild-type yeast strains in terms of cell growth and heavy metal removal, indicating that the copy number of the CUP1 gene for MT expression played an important role in the adsorption of heavy metals. It was suggested that the CUP1 promoter for the MT expression is induced by manganese and zinc as well as copper An optimum copper concentration for MT expression and concomitant adsorption of heavy metals by recombinant S. cerevisiae was found to be 0.31 mM. A nonionic surfactant Triton X-100 enhanced cell growth by 17.7% and removal of zinc by 6.1% compared with the control case.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.12
• /
• pp.1965-1970
• /
• 2009

This study examined the effect of surfactant pretreatment on the pectinase-treated cotton/chitosan blends by weight loss and properties such as water absorbency, dyeability, tensile strength, pilling property, and surface morphology. The weight loss of cotton/chitosan blends was 1.5% by the surfactant pretreatment/pectinase treatment. The water absorbency and dyeability of samples showed a significant improvement by the surfactant pretreatment/pectinase treatment. The tensile strength and pilling property of treated fabrics showed no change. The water absorbency and dyeability of pectinase treated samples improved with the pretreatment of the surfactant without damaging the fibers.

• Applied Chemistry for Engineering
• /
• v.33 no.2
• /
• pp.151-158
• /
• 2022

In this paper, parameter characteristics such as pH effect, isotherm, kinetic and thermodynamic parameters and competitive adsorption of dyes including malachite green (MG), direct red 81 (DR 81) and thioflavin S (TS), which have different functional groups, being adsorbed onto activated carbon were investigated. Langmuir, Freundlich and Temkin isotherm models were employed to find the adsorption mechanism. Effectiveness of adsorption treatment of three dyes by activated carbon were confirmed by the Langmuir dimensionless separation factor. The mechanism was found to be a physical adsorption which can be verified through the adsorption heat calculated by Temkin equation. The adsorption kinetics followed the pseudo second order and the rate limiting step was intra-particle diffusion. The positive enthalpy and entropy changes showed an endothermic reaction and increased disorder via adsorption at the S-L interface, respectively. For each dye molecule, negative Gibbs free energy increased with the temperature, which means that the process is spontaneous. In the binary component system, it was found that the same functional groups of the dye could interfere with the mutual adsorption, and different functional groups did not significantly affect the adsorption. In the ternary component system, the adsorption for MG lowered a bit, likely to be disturbed by the other dyes meanwhile DR 81 and TS were to be positively affected by the presence of MG, thus resulting in much higher adsorption.

• Journal of the Korean Electrochemical Society
• /
• v.2 no.4
• /
• pp.213-217
• /
• 1999

The electrochemical characteristics of two distinct adsorption sites of H at the polycrystalline Pt/0.2 M LiOH aqueous electrolyte interface have been studied using the phase-shift method. At the forward and backward scans, the under-potentially deposited H (WD H) peak occurs on the cyclic voltammogram. The transition region on the phase-shift profile or the Langmuir adsorption isotherm occurs at ca. -0.66 to -0.96 V vs. SCE. At the transition region (ca. -0.66 to -0.96 V vs. SCE), the equilibrium constant (K) for H adsorption transits from 18.5 to $4.0\times10^{-5}$ and vice versa. Similarly, the standard free energy $({\Delta}G_{ads})$ of H adsorption transits from -7.2 to 25.1kJ/mol and vice versa. The under and over-potentially deposited H (UPD H and OPD H) on the poly-Pt surface act as two distinguishable electroadsorbed H species. An exothermic reaction occurs at the UPD H range. Both the UPD H peak and the transition region are attributed to the two distinct adsorption sites of the UPD H and OPD H on the poly-Pt surface.

• Korean Journal of Environmental Agriculture
• /
• v.17 no.1
• /
• pp.43-47
• /
• 1998

This study was performed to remove the dissolved benzene in water by using TMA-Zeolite complex which was formed by the adsorption of TMA(Tetramethyl ammonium), a kind of ration surfactant on a natural zeolite produced in Korea. The dorminant clay minerals of the natural zeolite was identified by X-ray diffractometry and Infrared spectrophotometry to be mordenite and clinoptilolite. The CEC of the zeolite used was 95.9 cmol/kg. TMA was adsorbed on natural zeolite very quickly, and the amount of TMA adsorption on zeolite was known to be equivalent to about 8% of the CEC of natrual zeolite. The amount of benzene adsorption on TMA-zeolite complex was much more than natural zeolite, indicating that the dissolved benzene in water could be removed effectively by TMA-zeolite comple.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.8
• /
• pp.1465-1474
• /
• 2001

The dispersion stability of particles and the adsorption of surfactant were examined as a fundamental environment to adhesion of particulate soil to fabric. The adsorption of surfactant on the PEF fabrics decreased with the addition of electrolytes and decreased with increasing the ionic strengths showed similar tendency to PET fabric. And the dispersion force of $\alpha$-Fe$_2$O$_3$particles decreased with the addition of electrolyte. The adhesion of particulate soil to fabric, increased with decreasing the adsorption of surfactant the correlation between the two was high at low ionic strength. The correlation between the adsorption of surfactants on $\alpha$-Fe$_2$O$_3$ particles and the adhesion of particles to fabric was smaller as shown in the correlation between the adsorption of surfactants on fiber substrate and the adhesion of particles on fabric. However, the correlation between the adhesion of particles to fabric and the stability of particle dispersion was relatively more significant.

• Applied Chemistry for Engineering
• /
• v.10 no.1
• /
• pp.1-5
• /
• 1999

The dispersing performance of oligomer-type anionic surfactants ($C_mD-Na$), cooligomers of diethylester maleate and alkylvinylether of different alkyl chain lengths or polymerization degree were studied on the aqueous suspension of iron dxide or titanium dioxide particles which are hydrophilic pigments. The dispersion behavior of oligomer-type surfactants for these dispersoids, although anion charges on the surface of pigments particles showed different dispersing properties, was dependent upon the side alkyl chain length. Oligomer-type surfactants having more than $C_8$ side alkyl chain exhibited large dispersing action for relatively hydrophobic ${\alpha}-Fe_2O_3$ and Anatase $TiO_2$ in the concentration range of more than 0.1% oligomer-type surfactant solutions.

• Analytical Science and Technology
• /
• v.12 no.1
• /
• pp.13-21
• /
• 1999

Silicate used as laundry detergent builder was good for pH buffering capacity and solubility but calcium-ion binding capacity and surfactant adsorption ability were lower. As $SiO_2/Na_2O$ molar ratio became higher, pH buffering capacity and ion exchange ability were lower and surfactant adsorption ability was little higher. Anionic surfactant LAS (linear alkylbenzene sulphonate), nonionic surfactant LA-9 (lauryl alcohol EO-9) were used to investigate the detergency performance. Zeolite was better than sodium silicate in detergency performance. In case of LAS, detergency performance was good when $SiO_2/Na_2O$ molar ratio was lower. In case of LA-9, detergency performance was similar without discrimination of molar ratio of $SiO_2/Na_2O$.