• Journal of Marine Bioscience and Biotechnology
• /
• v.1 no.4
• /
• pp.260-267
• /
• 2006

The Liquid Culture Assay using a recombinant Agrobacterium tumefaciens strain has been developed as a means for quorum sensing autoinducer screening. However, the low aqueous solubility of marine natural product extracts used as potential autoinducers has been a hindrance in the screening process. Although the addition of organic solvents and/or surfactants could increase aqueous solubility, errors in data interpretation including false positive results could be a serious problem. Therefore, determining the best possible solvent and surfactant at the optimum concentration is crucial. Evaluating methanol, ethanol, 1-propanol, DMSO and DMF at concentration ranges of 0~10% revealed < 2% methanol to be most favorable when tested for ${\beta}$-gal activity and growth inhibition of the recombinant A. tumefaciens strain. On the other hand, among surfactants tested, Triton X-100 was similarly effective in increasing the delivery of autoinducers for activity at less than 0.05% concentration.

• Economic and Environmental Geology
• /
• v.35 no.5
• /
• pp.421-428
• /
• 2002

Lab-scale experiments were conducted to evaluate the effect of surface tension reduction on the extension of the influence zone and the VOC removal efficiency of ground water sparging. A glass column packed with coarse sand was used for VOC removal test at two different surface tensions. A glass column without porous media was also used fer control purpose prior to sand-packed column test. A quasi-two-dimensional glass box model, packed with a sand, was used fer sparging zone tests at different water surface tensions. Surface tension of the aquoues solution used in this study was controlled using sodium dodecyl sulfate (SDS). For the glass, sand column experiments, total amount of air filled in the media increased as surface tension decreased. Toluene (used as VOC in this study) removal rate increased slightly with decreased surface tension f3r both free water column and sand-packed column. Air sparging zone extended up to 500% as the surface tension decreased. Combining the results from two different experiments, VOC removal efficiency is expected to increase significantly with surface tension reduction.

• Applied Chemistry for Engineering
• /
• v.10 no.4
• /
• pp.592-598
• /
• 1999

Exterior finishing materials of artificial stones are manufactured with the mixture of water, cement, stone powder and light-weight aggregate. In this research, we tried to find a way of increasing the physical properties and decreasing the manufacturing cost of artificial stone. So, we used ${\beta}$-NSF base surfactant and vinsol base surfactant to the artificial stone mixture instead of light-weight aggregate. The optimum dosage of the ${\beta}$-NSF and vinsol surfactants for artificial stone are found to be 1.0 wt % of cement, respectively. The physical properties increased ca. 20% and the durability for freezing & thawing of the new artificial stone increased ca. 300%. While the manufacturing cost of the new artificial stone decreased as much as 30%.

• Journal of Conservation Science
• /
• v.25 no.2
• /
• pp.219-231
• /
• 2009

The purpose of this study is to provide basic information necessary for the cleaning of excavated costumes. For the purpose, these researchers reviewed previous records of the actual cleaning of excavated costumes and then implemented and documented the processes of cleaning the Yeosan Song's costumes excavated at Mokdal-dong, Daejeon, which could date back to the early and mid periods of Choseon Dynasty. The excavated clothes of the family provide good examples for comparing men's costume of the 15th century with men's and women's of the mid and late 16th century. The total quantity of excavated remains were 184 and textiles were cotton, silk, hemp, ramie, and union cloth. The clothing remains were processed through wet or dry cleaning in accordance with their fabric condition and the extent to which they were worn or polluted. In detail, the excavated costumes of the Yeosan Song family were cleaned in two stages. For wet cleaning, both anionic(LAS) and nonionic(Triton X-100) surfactants were respectively used as cleaning agents and for dry cleaning, a mixture of n-hexane and n-decane(the ratio of 4 to 6) and petrolic dry cleaning solvent were used. After first cleaning, some cotton, ramie and hemp which had still the stains were processed bleaching and silk which were good condition was processed dry cleaning with the organic solvent again.

• Proceedings of the KAIS Fall Conference
• /
• 2002.05a
• /
• pp.260-263
• /
• 2002

이 연구는 과량의 유분(dodecane)으로 오염된 토양을 효율적으로 정화시키기 위한 화학적 토양세정(soil flushing)에서 알코올 성분에 의한 유동성을 고찰한 것이다. 탄소수가 다른 알코올 (methanol, ethanol, butanol)과 Tween-80 계면활성제를 세정용액으로 사용하여 혼합비, 조용매 종류 및 체류시간에 따른 세정결과를 도시하였다. 조용매 사용시 세척효율은 최대 94%(Butanol/Tween-80(w/w)=0.1) 이었다. 체류시간의 연장은 재흡착되는 admicelle의 증가로 말미암아 세정효율을 감소시키는 것으로 나타났다.

• Journal of Conservation Science
• /
• v.37 no.2
• /
• pp.101-119
• /
• 2021

Korea's National Treasure No. 229, the Jagyeongnu (clepsydra) of Changgyeonggung Palace, is a scientific and cultural property representing the pinnacle of science and technology in the Joseon Dynasty. Currently, only the large, mid-sie, and small Pasuhos (bronze jars) remain. During a nearly two-year conservation project by the Cultural Heritage Conservation Science Center (CHCSC) that began in 2018, conservators identified the contaminants on the surface of the water clock's components. It turned out that the contaminants had been caused by the exposure of squalane and silicone oil, used in an earlier preservation treatment, to the elements. The CHCSC conducted experiments to determine the most effective method to remove the contaminants. First, the conservators tried using an organic solvent, a poultice, and the application of toluene and bentonite, which yielded excellent reactivity and significant color difference changes (𝚫E). However, the reactivity was insufficiently effective to warrant the health hazards to the conservators and the environment (toluene is toxic). Although organic solvents required considerably more effort, time, and human resources, the conservators confirmed that their use achieved a true color difference variation (𝚫E) that was within the same range as the toxic hydrocarbon. Thus, they confirmed that using an organic surfactant was the best method for removing the contaminants.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1998.04a
• /
• pp.117-119
• /
• 1998

1. 서론 : 본 연구에서는 한외여과막을 이용하여 대형건물에서 발생하는 오수, 동/식물성 오일과 계면활성제를 함유하는 ㅈ 중국식당 배수 및 자동차 세척 배수를 처리하였다. 대형건물 및 식당 배수에서는 한외여과막 투과수를 재사용하기 위하여 추가적인 공정이 요구되나 자동차 세차배수의 경우, 한외여과막으로 오일 성분만을 효과적으로 제거하고 유효성분인 세척제와 세척용수를 재활용할 수 있을 것으로 판단된다.

• Journal of Conservation Science
• /
• v.25 no.2
• /
• pp.171-178
• /
• 2009

When we considered the superior ability of the semi-water soluble urethane 1st transcription and final epoxy products, the stability for moving historic sites depend on physical properties and the peel off state of separation media. In this paper, we synthesised three type of water-borne epoxy solution without using a surfactant, and investigated the peel off state, physical properties, and the state between urethane surface and epoxy surface after exfoliation. The life time of water-borne separation media is over the 60 days. When it is used the 30% solution of water-borne separation media, it made good separation of urethane pre-products surface and epoxy final product surface and no color change. The separation tension pressure is about 15~50 kg/$cm^2$ and there is no surface whitewash phenomenon. We suggest that this water-borne epoxy will be best material as separation media of low viscosity type.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.1 no.1
• /
• pp.17-25
• /
• 2013

Thermal storage technology used for indoor heating and cooling to maintain a constant temperature for a long period of time has an advantage of raising energy use efficiency. This, the phase changing material, which utilizes heat storage properties of the substances, capsulizes substances that melt at a constant temperature. This is applied to construction materials to block or save energy due to heat storage and heat protection during the process in which substances melt or freeze according to the indoor or outdoor temperature. The micro-encapsulation method is used to create thermal storage from phase changing material. This method can be broadly classified in 3 ways: chemical method, physical and chemical method and physical and mechanical method. In the physical and chemical method, a wet process using the micro-encapsulation process utilized. This process emulsifies the core material in a solvent then coats the monomer polymer on the wall of the emulsion to harden it. In this process, a surfactant is utilized to enhance the performance of the emulsion of the core material and the coating of the wall monomer. The performance of the micro-encapsulation, especially the coating thickness of the wall material and the uniformity of the coating, is largely dependent on the characteristics of the surfactant. This research compares the performance of the micro-capsules and heat storage for product according to molecular mass and concentration of the surfactant, SSMA (sulfonated styrene-maleic anhydride), when it comes to micro-encapsulation through interfacial polymerization, in which Dodecan-1 is transformed to melamin resin, a heat storage material using phase changing properties. In addition, the thickness of the micro-encapsulation wall material and residual melamine were reduced by adjusting the concentration of melamin resin microcapsules.

• Applied Chemistry for Engineering
• /
• v.28 no.5
• /
• pp.513-520
• /
• 2017

The application possibility of an alternative new method with low energy consumption was studied for the eco-friendly fabrication of foamed glasses from waste glasses. As a result, fabricating temperature can be reduced under $300^{\circ}C$ without using various expensive inorganic oxidants. The foamed glass can be fabricated at a proper mixing ratio of the waste glass powder, water glass, little surfactant and bubble stabilizer by induction heating method. In the experimental range, the assured optimal condition is 4 min heating on the induction machine with a steel-container ($100mm{\times}100mm{\times}20mm$) and followed by evaporating and drying process for 11 min with 110 g of glass powder, 80 g of water glass, 3 g of surfactant and 0.2 g of bubble stabilizer. When the foamed glass was fabricated at the optimal condition, the density of the glass was $0.85g/cm^3$ and the heat conduction was $0.052W/h{\cdot}K$. In addition, the compressive strength of the glass was above $50kg/cm^2$.