• KSBB Journal
• /
• v.23 no.3
• /
• pp.257-262
• /
• 2008

In this study, the reaction conditions for lipase-catalyzed resolution of racemic naproxen 2,2,2-trilfluoroethyl thioester were optimized, and the effect of surfactants was investigated. Among the organic solvents tested, the isooctane showed the highest conversion (92.19%) in a hydrolytic reaction of (S)-naproxen 2,2,2-trifluoroethyl thioester. In addition, the isooctane induced the highest initial reaction rate of (S)-naproxen 2,2,2-trifluoroethyl thioester ($V_s=2.34{\times}10^{-2}mM/h$), the highest enantioselectivity (E = 36.12) and the highest specific activity ($V_s/(E_t)=7.80{\times}10^{-4}mmol/h{\cdot}g$) of lipase. Furthermore, reaction conditions such as temperature, concentration of the substrate and enzyme, and agitation speed were optimized using response surface methodology (RSM), and the statistical analysis indicated that the optimal conditions were $48.2^{\circ}C$, 3.51 mM, 30.11 mg/mL and 180 rpm, respectively. When the optimal reaction conditions were used, the conversion of (S)-naproxen 2,2,2-trifluoroethyl thioester was 96.5%, which is similar to the conversion (94.6%) that was predicted by the model. After optimization of reaction conditions, the initial reaction rate, lipase specific activity and conversion of (S)-naproxen 2,2,2-trifluoroethyl thioester increased by approximately 19.54%, 19.12% and 4.05%, respectively. The effect of surfactants such as Triton X-100 and NP-10 was also studied and NP-10 showed the highest conversion (89.43%), final reaction rate of (S)-naproxen 2,2,2-trifluoroethyl thioester ($V_s=1.175{\times}10^{-2}mM/h$) and enantioselectivity (E = 59.24) of lipase.

• Analytical Science and Technology
• /
• v.6 no.1
• /
• pp.1-8
• /
• 1993

The purpose of this study is to investigate the elution behavior of monosubstituted phenols and benzenes in micellar liquid chromatographic system, $C_{18}$ column-anionic surfactant, sodium dodecyl sulfate(SDS). The partition coefficients between the micellar pseudophase-water and modified stationary phase-water are calculated by the relationship between solute retention and micellar mobile phase(SDS) composition. The free energy of transfer of solute from water to micelle is also calculated from these values. There is a direct correlation between the hydrophobicity parameters in MLC and corresponding partition data for 1-octanol-water, which indicates that the hydrophobicity of molecules plays an important role in the partition for both systems and that quantitative structure activity relationships(QSAR) are available from studies on micellar partition. The other purpose of this study is to investigate methylene selectivity of alkyl homologous series through correlation between retention and the number of carbons. The correlation between hydrophobicity parameters in MLC and 1-octanol-water partition data was also observed when n-propanol was as a modifier in the mobile phase.

• Membrane Journal
• /
• v.16 no.4
• /
• pp.294-302
• /
• 2006

Silver polymer electrolytes are very promising membrane materials for the separation of olefin/paraffn mixtures. Olefin molecules are known to be transported through reversible complex formation with silver ions entrapped iii polymer matrix. However, they have poor long-term stability, which is very important fur the industrial application; the selectivity through the membrane decreases gradually with time mostly due to the reduction of silver ions ($Ag^+$) into silver nanoparticles ($Ag^0$). In this study, the stability of silver polymer electrolyte was investigated for poly(vinyl pyrrolidone) (PVP) and $AgBF_4$ system containing a surfactant, i.e. $C_{18}H_{35}(OCH_2CH_2)_{20}OH$ (Brij98) as a stabilizer. The reduction behavior of silver ions to silver nanoparticles in PVP was also investigated by atomic force microscopy (AFM) and UV-visible spectroscopy. It was found that the growth of silver nanoparticles was slower and selectivity of polymer electrolyte for propylene in propylene/propane was maintained longer time when Brij98 was added as a stabilizer.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.38 no.3
• /
• pp.201-207
• /
• 2012

The influence of different dilution procedures on the properties of oil-in-water (O/W) nano-emulsions obtained by dilution of oil-in-ethanol (O/E) microemulsions with water has been studied. The system water/ethanol/nonionic surfactant/silicone oil with ethanol was chosen as model system. The dilution procedures consisted of adding water (or microemulsion) stepwise. By mixing O/E microemulsions into water, nano-emulsions with droplet diameters of 30 nm were obtained. In contrast, by mixing water into O/E microemulsion, emulsions with diameter of 400 nm were obtained The dilution methods were shown to be a key factor determining the properties of the emulsions. There were no change in diameters of nanoemulsion droplets against time, however sizes of droplets in the emulsion with larger droplets were increased with time and the mechanism of unstability was thought to be Ostwald ripening.

• Korean Journal of Agricultural Science
• /
• v.37 no.2
• /
• pp.171-175
• /
• 2010

This study was carried out to find the effect on growing media and proper time for water supply in rice seedling stages. Plant height of rice seedling for SIPAN-BRL among current several growing medias was higher in Chuchungbyeo than Ilpumbyeo, and that of root length was higher in check among used growing medias. Fresh and dry weight of shoot and root of two rice cultivar. Water time to absorption on each treatment of growing media concentration took similarly in SIPAN-BNH and check were similar. But 500 minutes did in 100ppm and did 370 and 470minute in 300 and 500ppm, respectively. Wilting time of rice seedling was appeared highly at 300ppm of SIPAN-BRL in Chuchungbyeo and 100ppm of SIPAN-BRL in Ilpumbyeo, while it prolonged at 300ppm in Chuchungbyeo and 500ppm in Ilpumbyeo, respectively. Water content at wilting stage was appeared highly at SIPAN-BRL 500ppm in both Chuchungbyo and Ilpumbyeo, while SIPAN-BNL was high in 300ppm of Chuchung-byeo and Ilpumbyeo, respectively. Plant and root length of SIPAN-BNL treated with 300ppm in 10day-rice seedling were highly appeared, while dry weight of shoot was high at 300ppm SIPAN-BNL.

• Membrane Journal
• /
• v.5 no.2
• /
• pp.74-80
• /
• 1995

Asymmetric poly(vinyl alcohol) (PVA) membranes were prepared by varying the precipitation conditions of the phase inversion technique, and the influences of precipitation conditions on the water uptake of the membrane were investigate. The degree of water uptake of the membrane increased and reached a certain maximum value, as the precipitation time increased. However, it decreded after that. As the precipition temperauure became lower, the degree of water uptake increased more or less. The addition of a nonionic surfactant to the precipitaon solution was effective reducing the precipitation time by lowering the surface tension of the precipitation solution, but ig didn't change the maximum value of its own degree of water uptake. In addition, the relationship between the degree of water uptake and the separation characteristics and mechanical properies of the membrane were investigated. The selectivity factor of the membrane for pervaperation separation decreased, but the permeate flux increased, respectively, with increasing the degree of water uptake. The tensile strength and elongation of the membrane, respectively, increased to a maximum value with increasing the degree of water uptake, and then decreased abtuptly.

• Journal of the Korean Applied Science and Technology
• /
• v.14 no.3
• /
• pp.63-69
• /
• 1997

Micellization range and cmc for the dilute aqueous solution of sucrose monoesters, that is, sucrose monolaurate, sucrose monomyristate, sucrose monopalmitate, sucrose monostearate and sucrose monooleate were investigated by computer programming. The extreme of the curvature of ${\sigma}$(C) as a new suggested method to determine the cmc and the micellization range was accomplished with computer programming. The values of cmc and micellization range can be obtained by the extreme of the curve by direct processing of only a few experimental data. The values of cmc particulary was in good agreement with those deduced intuitively from the shape of experimental curves of ${\sigma}$(C).

• Korean Journal of Food Science and Technology
• /
• v.29 no.1
• /
• pp.1-8
• /
• 1997

A complement system-activating (anti-complementary) polysaccharide was purified from the hot water extract of young stems of Cinnamomum cassia Blume. Crude polysaccharide fraction (CC-1) was prepared from the hot water extract of the young stems followed by methanol-reflux, precipitation with ethanol, dialysis, and lyophilization. The anti-complementary activity of CC-1 was decreased greatly by periodate oxidation, but was not changed by pronase digestion. These suggest that carbohydrate moiety may be related to the activation of complement system. According to its ionic strength CC-1 was fractionated first using cetavlon to give 4 fractions, CC-2, 3, 4 and 5. Among them CC-2 fraction was found to retain the highest activity and yield. CC-2 was separated to an unabsorbed neutral sugar portion (CC-2-I) and seven absorbed acidic sugar fractions $(CC-2-II{\rightarrow}CC-2-VIII)$ on DEAE-Toyopearl 650C (Cl-). CC-2-III showing higher anti-complementary activity and yield than those of other fractions, was further purified on the gel permeation of Sephadex G-100 and Sepharose CL-6B to CC-2-IIIa-3. CC-2-IIIa-3 was determined to have a homogeneity hy GPC (Sepharose CL-6B) and HPLC. Gel chromatography using standard dextrans gave a value of $2.4{\times}10^5$ for the molecular weight. The purified polysaccharide, CC-2-IIIa-3 consisted of arabinose, xylose, glucose, galactose, galacturonic acid and glucuronic acid in a molar ratio of 5.56 : 3.77 : 1.87 : 1.00 : 5.12 : 3.13 and contained no nitrogen.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.10 no.2
• /
• pp.100-116
• /
• 2002

There are several purpose to introduce microorganism into the Soil. The major purpose is to promote plant growth and inhibit plant pathogens. The model example is to put in nitrogen fixing symbiotic bacteria, Pythium and Rhizobium. In order to achieve the intended goal, the introduced microorganism should survive and colonize with sufficient density. The survival of introduced microorganism depend upon biotic and abiotic factors. Predation and competition are important among biotic factor. Water tension, organic carbon, inorganic nutrients(N, P), pH are important factor among abiootic factor. Soil texture and distribution of soil pore are also important in the survival and colonization of introduced microorganism. Selection by soil ecosystem for inoculant is a crucial factor for colonization. Good example are control of autochtonous microorganism and the introduction of surfactant biodegrading Pseudomonas. Sometimes, carriers such as peat and montmorillonite can be added to help colonization. Carriers can protect introduced microorganism by supplying protective microhabitat. Organic polymer is also used as a carrier to immobilize bacteria or industrial enzymes. Examples of these carrier are calcium alginate, agarose and k-carrageenan. The function of these carrier is to provide microhabitat and help colonization for introduced microorganism.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.708-715
• /
• 2017

Recently, in order to meet the stricter emission regulations, the proportion of after-treatments for vehicles and vessels has been increasing gradually. The objective of this study is to investigate the improvement of $CH_4$ reduction ability of natural gas oxidation catalyst (NGOC), which reduces toxic gases emitted from CNG buses. Thirteen NGOCs were prepared, and the conversion performance of noxious gases according to the type of supports, the loading amount of noble metal, and surfactant and aging were determined. Support Zeolite supported on No. 3 $NGOC(1Pt-1Pd-3MgO-3CeO_2/(46TiO_2+23Al_2O_3+23Zeolite)$ is an anionic alkali metal/earth metal component that improved the oxidation reactivity between CO and NO and noble metal dispersion, and thus enhanced the $CH_4$ reduction ability. As the loading amount of Pd, a noble metal with a high selectivity to $CH_4$, was increased, the number of reaction sites was increased and the ability to reduce $CH_4$ was improved. No. 11 $NGOC(1Pt-1Pd-3MgO-3CeO_2/(Z20+Al80)$(pH=8.5), to which nitrate surfactant had been added, exhibited well dispersed catalyst particles with no agglomeration and improved the $CH_4$ reduction ability by 5-15%. The $NGOC(2Pt-2Pd-3Cr-3MgO/90Al_2O_3)$(48h aging), which was mildly thermal aged for 48h, increased the $CH_4$ reduction ability to about 10% or less as compared with No. 12 NGOC(Fresh).